Remote Dispense - With Uv, Uf And Toc Monitor Installed, /60Hz Overview
The Yamato WG301UVUFTR Remote Dispense Water Purification System is a Type I ultrapure water purifier that delivers 18.2 MΩ·cm resistivity water with TOC below 5 ppb. Built for genetics testing and biological work, this compact unit pairs UV oxidation, ultrafiltration, and an integrated TOC monitor in one bench-saving package.
Purification runs through conditioning and polishing cartridges, UV oxidation, and ultrafiltration to handle bacteria sterilization, TOC reduction, and pyrogen removal. A 0.2 micron final filter and quick-change ResinTech ion-exchange cartridges keep output consistent. Quick-change media installs without tools, while real-time monitoring tracks quality and detects leaks.
This model operates on 120V / 60 Hz and measures 21.6" × 14.7" × 14.4" (54.8 × 37 × 36.5 cm). Typical flow is 2.5 LPM (0.67 GPM) from feed water under 20 µS/cm. Unit weight is 51 lbs, and the system is Made in USA.
Key Features
- Type I ultrapure output: 18.2 MΩ·cm resistivity water with TOC below 5 ppb and bacteria under 1 cfu/ml.
- Multi-stage purification: conditioning and polishing cartridges plus UV oxidation and ultrafiltration for sterilization, TOC reduction, and pyrogen removal.
- Integrated TOC monitor: on-board real-time quality monitoring with leak detection.
- 0.2 micron final filter: delivers consistent ultrapure water at a typical flow of 2.5 LPM (0.67 GPM).
- Quick-change cartridges: no-tools design with premium ResinTech ion-exchange media.
- Remote dispense, compact footprint: 21.6" × 14.7" × 14.4" body fits tight bench layouts.
How to Choose the Right Water Purification System
Selecting a purifier starts with the water grade your assays demand, then matches throughput, dispense layout, and site power. Use these axes to confirm fit before specifying a unit.
- Water type: Type I ultrapure (18.2 MΩ·cm) suits genetics, molecular biology, and low-TOC work; lower grades cannot support sensitive biological protocols.
- TOC and sterilization: UV oxidation, ultrafiltration, and a sub-5 ppb TOC target matter when pyrogen removal and bacteria control are critical.
- Flow rate: a 2.5 LPM typical output should match how quickly your bench draws ultrapure water.
- Feed water quality: confirm your source meets the under-20 µS/cm requirement for proper cartridge life and output.
- Dispense configuration: remote dispense placement frees bench space and positions the tap where the work happens.
- Voltage and footprint: verify a 120V / 60 Hz circuit and the 21.6" × 14.7" × 14.4" footprint at the install point.
Specifications
| Specification | Detail |
|---|---|
| Voltage | 115V |
| Type | Type I ultrapure water purification system |
| Purification Process | Conditioning and polishing cartridges plus UV oxidation and ultrafiltration (bacteria sterilization, TOC reduction, pyrogen removal), with a 0.2 µm final filter |
| TOC | < 5 ppb |
| TOC Monitor | Integrated TOC monitor |
| Dispense Configuration | Remote dispense |
| Power | 120V / 60 Hz |
| Application | Genetics testing and biological work — ultrapure, biological, low TOC |
| Water Quality | Type I ultrapure — 18.2 MΩ·cm resistivity |
| Bacteria | < 1 cfu/ml |
| Flow Rate | 2.5 LPM / 0.67 GPM (typical) |
| Feed Water Requirement | < 20 µS/cm |
| Final Filter | 0.2 micron |
| Monitoring | Real-time quality monitoring with leak detection |
| Cartridges | Quick-change, no-tools design; premium ResinTech ion-exchange media |
| Dimensions (H × W × D) | 21.6" × 14.7" × 14.4" (54.8 × 37 × 36.5 cm) in |
| Country of Origin | United States |
| GTIN (Barcode) | 797059929481 |
| Shipping Weight | 51 lbs |
| Dimensions (L × W × H) | 26.5 × 26.63 × 20.3 in |
| ISO 9001:2015 | Contact Customer Service |
Available Sizes and Configurations
| SKU | Configuration | Pack |
|---|---|---|
| WG-301UVUFTR | EA | EA |
Documentation
More in This Series
- Distilled / Deionized Water Purification System ~1.8L/Hr. 20L Tank With External Transformer
- Distilled / Deionized Water Purification System ~1.8L/Hr. 30L Tank With External Transformer
- Distilled / Deionized Waterpurification System ~1.8L/Hr. 30L Tank With External Transformer
- Distilled / Deionized Water Purification System ~5L/Hr. 100L Tank Single Phase With External Transformer
- Deionized Water Purification System 0.5~1.0L/Min 115
- Benchtop Or Wall Mount Base System, /60Hz
- Benchtop Or Wall Mount Base System, /50Hz
- Remote Dispense Configuration Base System, /60Hz
- Remote Dispense Configuration Base System, /50Hz
- Benchtop - With Uv Oxidation Lamp Installed, /60Hz
- Benchtop - With Uv Oxidation Lamp Installed, /50Hz
- Benchtop - With Uv Oxidation Lamp And Toc Monitor /60Hz
- Benchtop - With Uv Oxidation Lamp And Toc Monitor /50Hz
- Remote Dispense Configuration - With Uv Oxidation Lamp, /60Hz
- Remote Dispense Configuration - With Uv Oxidation Lamp, /50Hz
- Remote Dispense - With Uv Oxidation Lamp And Toc Monitor /60Hz
- Remote Dispense - With Uv Oxidation Lamp And Toc Monitor /50Hz
- Benchtop - With Ultrafiltration Module, /60Hz
- Benchtop - With Ultrafiltration Module, /50Hz
- Remote Dispense Configuration - With Ultrafiltration Module, /60Hz
- Remote Dispense Configuration - With Ultrafiltration Module, /50Hz
- Benchtop - With Uv And Uf Installed, /60Hz
- Benchtop - With Uv And Uf Installed, /50Hz
- Benchtop - With Uv, Uf And Toc Monitor Installed, /60Hz
- Benchtop - With Uv, Uf And Toc Monitor Installed, /50Hz
- Remote Dispense Configuration - With Uv And Uf Installed, /60Hz
- Remote Dispense Configuration - With Uv And Uf Installed, /50Hz
- Remote Dispense - With Uv, Uf And Toc Monitor Installed, /50Hz
- Direct Feed Option (Factory Installed)
- Wall Mount Bracket
- Dispensing Gun Option (Factory Installed)
- High Purity Di System - 2-1/2" Diameter (10" Carbon, (2) 20" Mixed Bed, & 200 K Di Light)
- High Capacity Di System - 2-1/2" Diameter (10" Carbon, (2) 20" High Capacity Di, & 20 K Di Light)
- High Purity Di System- 4-1/2" Diameter (10" Carbon, (2) 20" Mixed Bed, & 200 K Di Light)
- High Capacity Di System- 4-1/2" Diameter (10" Carbon, (2) 20" High Capacity Di, & 20 K Di Light)
Why Buy From LabSupplies.com
LabSupplies.com is an authorized Yamato Scientific dealer, so every WG301UVUFTR ships as a genuine unit backed by the manufacturer warranty. Order directly and our lab-equipment specialists stand ready for spec and configuration questions.
- Authorized Yamato Scientific dealer: genuine system with full manufacturer warranty.
- In stock: ready to ship from USA inventory.
- Made in USA: manufactured in the United States.
- Specialist support: dedicated lab-equipment team for technical and installation questions.
Frequently Asked Questions
What water quality does the WG301UVUFTR produce?
It produces Type I ultrapure water at 18.2 MΩ·cm resistivity with TOC below 5 ppb and bacteria under 1 cfu/ml. The system combines conditioning and polishing cartridges, UV oxidation, and ultrafiltration with a 0.2 micron final filter.
What voltage and power does this system require?
The WG301UVUFTR runs on 120V / 60 Hz (115V). Confirm a standard matching circuit is available at the install location before delivery.
What are the dimensions and weight of the unit?
The system measures 21.6" × 14.7" × 14.4" (54.8 × 37 × 36.5 cm) and weighs 51 lbs. Its compact body and remote dispense layout suit tight bench installations.
What feed water quality is needed?
Feed water must be under 20 µS/cm. Meeting this requirement supports proper cartridge life and consistent ultrapure output at the typical 2.5 LPM (0.67 GPM) flow rate.
How are the cartridges replaced?
Cartridges use a quick-change, no-tools design with premium ResinTech ion-exchange media. This keeps maintenance fast and reduces downtime between media swaps.
Does this model include TOC monitoring?
Yes, an integrated TOC monitor is installed for real-time quality monitoring, and the system also includes leak detection.