Remote Dispense - With Uv Oxidation Lamp And Toc Monitor /50Hz Overview
The Remote Dispense Water Purification System with UV Oxidation Lamp and TOC Monitor (model WC311UVTR) is a Type I ultrapure water purification system from Yamato Scientific, supplied by LabSupplies.com, authorized dealer. It delivers 18.2 MΩ·cm resistivity water with TOC below 5 ppb for organic and analytical chemistry workflows.
Purification combines conditioning and polishing cartridges with a 185/254 nm UV oxidation lamp for bacteria sterilization and TOC reduction. A 0.2 micron final filter and integrated TOC monitor maintain real-time water quality, while quick-change, no-tools cartridges use premium ResinTech ion-exchange media.
This unit runs on 220V / 50 Hz power and produces water at a typical 2.5 LPM (0.67 GPM) flow rate. Its compact body measures 21.6" × 14.7" × 14.4" and weighs 49.5 lbs. The system is manufactured in the US.
Key Features
- Type I ultrapure output: produces 18.2 MΩ·cm resistivity water with TOC below 5 ppb and bacteria under 1 cfu/ml.
- UV oxidation lamp: dual-wavelength 185/254 nm UV provides bacteria sterilization and active TOC reduction.
- Integrated TOC monitor: real-time quality monitoring with leak detection tracks water quality continuously.
- Remote dispense configuration: separates the dispense point from the main unit for flexible bench placement.
- Quick-change cartridges: no-tools conditioning and polishing cartridges use premium ResinTech ion-exchange media.
- 0.2 micron final filter: removes residual particulates and bacteria at the point of dispense.
How to Choose the Right Water Purification System
Selecting a lab water system starts with the water grade your assays demand, then the feed water, throughput, and bench constraints of your site. Match these axes to your workflow before ordering.
- Water grade: Type I ultrapure (18.2 MΩ·cm) is required for analytical chemistry, HPLC, and low-TOC applications, while less demanding tasks may accept lower grades.
- TOC control: systems with UV oxidation and an integrated TOC monitor hold total organic carbon below 5 ppb for organic and analytical work.
- Flow rate: confirm the dispense rate (here, a typical 2.5 LPM / 0.67 GPM) meets your daily volume needs.
- Feed water requirement: verify your source meets the inlet specification (under 20 µS/cm) for proper performance.
- Voltage and power: match the unit to your site supply — this model is 220V / 50 Hz.
- Footprint and dispense layout: a remote dispense configuration and 21.6" × 14.7" × 14.4" body suit benches where the dispense point sits apart from the unit.
Specifications
| Specification | Detail |
|---|---|
| Voltage | 220V |
| Type | Type I ultrapure water purification system |
| Purification Process | Conditioning and polishing cartridges plus UV oxidation (185/254 nm) for bacteria sterilization and TOC reduction, with a 0.2 µm final filter |
| TOC | < 5 ppb |
| TOC Monitor | Integrated TOC monitor |
| Dispense Configuration | Remote dispense |
| Power | 220V / 50 Hz |
| Application | Organic and analytical chemistry — ultrapure, analytical, low TOC |
| Water Quality | Type I ultrapure — 18.2 MΩ·cm resistivity |
| Bacteria | < 1 cfu/ml |
| Flow Rate | 2.5 LPM / 0.67 GPM (typical) |
| Feed Water Requirement | < 20 µS/cm |
| Final Filter | 0.2 micron |
| Monitoring | Real-time quality monitoring with leak detection |
| Cartridges | Quick-change, no-tools design; premium ResinTech ion-exchange media |
| Dimensions (H × W × D) | 21.6" × 14.7" × 14.4" (54.8 × 37 × 36.5 cm) in |
| Country of Origin | United States |
| GTIN (Barcode) | 797059929375 |
| Shipping Weight | 49.5 lbs |
| Dimensions (L × W × H) | 26.5 × 26.63 × 20.3 in |
| ISO 9001:2015 | Contact Customer Service |
Available Sizes and Configurations
| SKU | Configuration | Pack |
|---|---|---|
| WC-311UVTR | EA | EA |
Documentation
More in This Series
- Distilled / Deionized Water Purification System ~1.8L/Hr. 20L Tank With External Transformer
- Distilled / Deionized Water Purification System ~1.8L/Hr. 30L Tank With External Transformer
- Distilled / Deionized Waterpurification System ~1.8L/Hr. 30L Tank With External Transformer
- Distilled / Deionized Water Purification System ~5L/Hr. 100L Tank Single Phase With External Transformer
- Deionized Water Purification System 0.5~1.0L/Min 115
- Benchtop Or Wall Mount Base System, /60Hz
- Benchtop Or Wall Mount Base System, /50Hz
- Remote Dispense Configuration Base System, /60Hz
- Remote Dispense Configuration Base System, /50Hz
- Benchtop - With Uv Oxidation Lamp Installed, /60Hz
- Benchtop - With Uv Oxidation Lamp Installed, /50Hz
- Benchtop - With Uv Oxidation Lamp And Toc Monitor /60Hz
- Benchtop - With Uv Oxidation Lamp And Toc Monitor /50Hz
- Remote Dispense Configuration - With Uv Oxidation Lamp, /60Hz
- Remote Dispense Configuration - With Uv Oxidation Lamp, /50Hz
- Remote Dispense - With Uv Oxidation Lamp And Toc Monitor /60Hz
- Benchtop - With Ultrafiltration Module, /60Hz
- Benchtop - With Ultrafiltration Module, /50Hz
- Remote Dispense Configuration - With Ultrafiltration Module, /60Hz
- Remote Dispense Configuration - With Ultrafiltration Module, /50Hz
- Benchtop - With Uv And Uf Installed, /60Hz
- Benchtop - With Uv And Uf Installed, /50Hz
- Benchtop - With Uv, Uf And Toc Monitor Installed, /60Hz
- Benchtop - With Uv, Uf And Toc Monitor Installed, /50Hz
- Remote Dispense Configuration - With Uv And Uf Installed, /60Hz
- Remote Dispense Configuration - With Uv And Uf Installed, /50Hz
- Remote Dispense - With Uv, Uf And Toc Monitor Installed, /60Hz
- Remote Dispense - With Uv, Uf And Toc Monitor Installed, /50Hz
- Direct Feed Option (Factory Installed)
- Wall Mount Bracket
- Dispensing Gun Option (Factory Installed)
- High Purity Di System - 2-1/2" Diameter (10" Carbon, (2) 20" Mixed Bed, & 200 K Di Light)
- High Capacity Di System - 2-1/2" Diameter (10" Carbon, (2) 20" High Capacity Di, & 20 K Di Light)
- High Purity Di System- 4-1/2" Diameter (10" Carbon, (2) 20" Mixed Bed, & 200 K Di Light)
- High Capacity Di System- 4-1/2" Diameter (10" Carbon, (2) 20" High Capacity Di, & 20 K Di Light)
Why Buy From LabSupplies.com
LabSupplies.com is an authorized Yamato Scientific dealer, so every WC311UVTR ships as a genuine unit backed by the manufacturer warranty. Our lab-equipment specialists can answer spec questions before you place your order.
- Authorized Yamato Scientific dealer: genuine equipment with full manufacturer warranty.
- In stock: ready to ship from USA inventory.
- Made in USA: manufactured in the United States.
- Specialist support: dedicated lab-equipment specialists for technical and spec questions.
Frequently Asked Questions
What water quality does the WC311UVTR produce?
It produces Type I ultrapure water at 18.2 MΩ·cm resistivity, with TOC below 5 ppb and bacteria under 1 cfu/ml. This grade suits organic and analytical chemistry applications.
What voltage and power does this system require?
The WC311UVTR runs on 220V / 50 Hz power. Confirm your site supply matches before installation.
How does the system reduce TOC and bacteria?
A dual-wavelength UV oxidation lamp at 185/254 nm provides bacteria sterilization and TOC reduction. Conditioning and polishing cartridges plus a 0.2 micron final filter complete the purification, and an integrated TOC monitor tracks quality in real time.
What is the flow rate and feed water requirement?
Typical flow rate is 2.5 LPM (0.67 GPM). Feed water must measure under 20 µS/cm for proper performance.
What are the dimensions and weight of the unit?
The system body measures 21.6" × 14.7" × 14.4" (54.8 × 37 × 36.5 cm) and weighs 49.5 lbs. Its compact, remote-dispense design fits benches where the dispense point is positioned separately.
Are the cartridges easy to replace?
Yes. The conditioning and polishing cartridges use a quick-change, no-tools design with premium ResinTech ion-exchange media, simplifying routine maintenance.