Benchtop - With Uv, Uf And Toc Monitor Installed, /60Hz Overview
The Yamato WG301UVUFTB Benchtop Water Purification System is a Type I ultrapure water purifier that delivers 18.2 MΩ·cm resistivity water at a typical flow rate of 2.5 LPM (0.67 GPM). Built by Yamato Scientific and stocked by LabSupplies.com, authorized dealer, it produces deionized water for genetics testing and demanding biological work.
Purification runs through conditioning and polishing cartridges paired with UV oxidation and ultrafiltration, handling bacteria sterilization, TOC reduction, and pyrogen removal before a final 0.2 micron filter. An integrated TOC monitor holds total organic carbon below 5 ppb, while bacteria counts stay under 1 cfu/ml. Quick-change cartridges use premium ResinTech ion-exchange media and require no tools.
Operating on 120V / 60 Hz, the unit measures 21.6" × 14.7" × 14.4" and installs on a bench or wall to suit tight lab footprints. Real-time quality monitoring with leak detection runs continuously. Manufactured in the US, the system weighs 37.4 lbs and feeds from source water below 20 µS/cm.
Key Features
- Type I ultrapure output: delivers 18.2 MΩ·cm resistivity water for genetics and biological applications.
- UV oxidation and ultrafiltration: bacteria sterilization, TOC reduction, and pyrogen removal before a 0.2 micron final filter.
- Integrated TOC monitor: holds total organic carbon below 5 ppb with bacteria under 1 cfu/ml.
- Quick-change cartridges: no-tools design using premium ResinTech ion-exchange media.
- Real-time monitoring: continuous water-quality readout with built-in leak detection.
- Flexible install: benchtop or wall-mount configuration in a 21.6" × 14.7" × 14.4" footprint.
How to Choose the Right Water Purification System
Matching a purifier to your workflow means aligning water type, throughput, and feed source with the analytical demands of your lab. Use these axes to scope the right unit.
- Water type: Type I ultrapure (18.2 MΩ·cm) suits genetics, molecular biology, and trace analysis; lower grades waste cost on routine tasks.
- TOC control: applications sensitive to organics need an integrated monitor and UV oxidation to hold TOC below 5 ppb.
- Flow rate: a 2.5 LPM typical output sets how quickly you can fill vessels and serve concurrent benches.
- Feed water quality: confirm your source measures below 20 µS/cm so cartridge life and performance stay on spec.
- Voltage and power: verify your bench supports 120V / 60 Hz before specifying.
- Footprint and mounting: the 21.6" × 14.7" × 14.4" body installs on bench or wall to fit constrained lab space.
Specifications
| Specification | Detail |
|---|---|
| Voltage | 115V |
| Type | Type I ultrapure water purification system |
| Purification Process | Conditioning and polishing cartridges plus UV oxidation and ultrafiltration (bacteria sterilization, TOC reduction, pyrogen removal), with a 0.2 µm final filter |
| TOC | < 5 ppb |
| TOC Monitor | Integrated TOC monitor |
| Dispense Configuration | Benchtop or wall-mount |
| Power | 120V / 60 Hz |
| Application | Genetics testing and biological work — ultrapure, biological, low TOC |
| Water Quality | Type I ultrapure — 18.2 MΩ·cm resistivity |
| Bacteria | < 1 cfu/ml |
| Flow Rate | 2.5 LPM / 0.67 GPM (typical) |
| Feed Water Requirement | < 20 µS/cm |
| Final Filter | 0.2 micron |
| Monitoring | Real-time quality monitoring with leak detection |
| Cartridges | Quick-change, no-tools design; premium ResinTech ion-exchange media |
| Dimensions (H × W × D) | 21.6" × 14.7" × 14.4" (54.8 × 37 × 36.5 cm) in |
| Country of Origin | United States |
| GTIN (Barcode) | 797059929443 |
| Shipping Weight | 37.4 lbs |
| Dimensions (L × W × H) | 26.5 × 18.63 × 20.3 in |
| ISO 9001:2015 | Contact Customer Service |
Available Sizes and Configurations
| SKU | Configuration | Pack |
|---|---|---|
| WG-301UVUFTB | EA | EA |
Documentation
More in This Series
- Distilled / Deionized Water Purification System ~1.8L/Hr. 20L Tank With External Transformer
- Distilled / Deionized Water Purification System ~1.8L/Hr. 30L Tank With External Transformer
- Distilled / Deionized Waterpurification System ~1.8L/Hr. 30L Tank With External Transformer
- Distilled / Deionized Water Purification System ~5L/Hr. 100L Tank Single Phase With External Transformer
- Deionized Water Purification System 0.5~1.0L/Min 115
- Benchtop Or Wall Mount Base System, /60Hz
- Benchtop Or Wall Mount Base System, /50Hz
- Remote Dispense Configuration Base System, /60Hz
- Remote Dispense Configuration Base System, /50Hz
- Benchtop - With Uv Oxidation Lamp Installed, /60Hz
- Benchtop - With Uv Oxidation Lamp Installed, /50Hz
- Benchtop - With Uv Oxidation Lamp And Toc Monitor /60Hz
- Benchtop - With Uv Oxidation Lamp And Toc Monitor /50Hz
- Remote Dispense Configuration - With Uv Oxidation Lamp, /60Hz
- Remote Dispense Configuration - With Uv Oxidation Lamp, /50Hz
- Remote Dispense - With Uv Oxidation Lamp And Toc Monitor /60Hz
- Remote Dispense - With Uv Oxidation Lamp And Toc Monitor /50Hz
- Benchtop - With Ultrafiltration Module, /60Hz
- Benchtop - With Ultrafiltration Module, /50Hz
- Remote Dispense Configuration - With Ultrafiltration Module, /60Hz
- Remote Dispense Configuration - With Ultrafiltration Module, /50Hz
- Benchtop - With Uv And Uf Installed, /60Hz
- Benchtop - With Uv And Uf Installed, /50Hz
- Benchtop - With Uv, Uf And Toc Monitor Installed, /50Hz
- Remote Dispense Configuration - With Uv And Uf Installed, /60Hz
- Remote Dispense Configuration - With Uv And Uf Installed, /50Hz
- Remote Dispense - With Uv, Uf And Toc Monitor Installed, /60Hz
- Remote Dispense - With Uv, Uf And Toc Monitor Installed, /50Hz
- Direct Feed Option (Factory Installed)
- Wall Mount Bracket
- Dispensing Gun Option (Factory Installed)
- High Purity Di System - 2-1/2" Diameter (10" Carbon, (2) 20" Mixed Bed, & 200 K Di Light)
- High Capacity Di System - 2-1/2" Diameter (10" Carbon, (2) 20" High Capacity Di, & 20 K Di Light)
- High Purity Di System- 4-1/2" Diameter (10" Carbon, (2) 20" Mixed Bed, & 200 K Di Light)
- High Capacity Di System- 4-1/2" Diameter (10" Carbon, (2) 20" High Capacity Di, & 20 K Di Light)
Why Buy From LabSupplies.com
LabSupplies.com is an authorized Yamato Scientific dealer, so every WG301UVUFTB ships as a genuine unit backed by the manufacturer warranty. Order directly and our lab-equipment specialists can confirm specifications before you commit.
- Authorized Yamato Scientific dealer: genuine equipment with full manufacturer warranty.
- In stock: ready to ship from USA inventory.
- Specialist support: dedicated lab-equipment team for technical and spec questions.
Frequently Asked Questions
What grade of water does the WG301UVUFTB produce?
It produces Type I ultrapure water at 18.2 MΩ·cm resistivity. The system uses conditioning and polishing cartridges with UV oxidation and ultrafiltration, holding TOC below 5 ppb and bacteria under 1 cfu/ml for genetics and biological work.
What is the typical flow rate?
Typical flow rate is 2.5 LPM (0.67 GPM). This dispense rate supports routine ultrapure water draws for benchtop applications.
What voltage and power does this system require?
The WG301UVUFTB operates on 120V / 60 Hz (115V). Confirm your bench circuit supports this before installation.
What are the dimensions and weight?
The unit measures 21.6" × 14.7" × 14.4" (54.8 × 37 × 36.5 cm) and weighs 37.4 lbs. It can be installed benchtop or wall-mounted to save space.
What feed water quality is required?
Feed water must measure below 20 µS/cm. Meeting this requirement protects cartridge life and keeps purification performance on specification.
How is total organic carbon controlled and monitored?
An integrated TOC monitor provides real-time readings while UV oxidation reduces organics to below 5 ppb. The system also includes a 0.2 micron final filter and continuous leak detection.