Remote Dispense - With Uv Oxidation Lamp And Toc Monitor /60Hz Overview
The Remote Dispense Water Purification System WC301UVTR is a Type I ultrapure water purification system from Yamato Scientific, supplied by LabSupplies.com as an authorized dealer. This compact unit produces water at 18.2 MΩ·cm resistivity with integrated UV oxidation and TOC monitoring for demanding analytical and organic chemistry work.
Purification combines conditioning and polishing cartridges with a 185/254 nm UV oxidation lamp that sterilizes bacteria and reduces total organic carbon. A 0.2 micron final filter removes residual particulates, while premium ResinTech ion-exchange media drives resistivity to ultrapure levels. Quick-change cartridges install without tools.
Operating on 120V/60Hz, the system occupies a 21.6 × 14.7 × 14.4 inch footprint and weighs 49.5 lbs. Real-time quality monitoring with leak detection tracks performance during every dispense. Manufactured in the USA, its remote dispense layout lets technicians draw water directly at the point of use.
Key Features
- UV Oxidation Lamp: dual-wavelength 185/254 nm lamp sterilizes bacteria and reduces total organic carbon.
- Integrated TOC Monitor: real-time TOC monitoring with output below 5 ppb.
- Type I Water Quality: 18.2 MΩ·cm resistivity with bacteria levels under 1 cfu/ml.
- Final Filtration: 0.2 micron final filter removes residual particulates before dispense.
- Quick-Change Cartridges: no-tools conditioning and polishing cartridges using premium ResinTech ion-exchange media.
- Continuous Monitoring: real-time quality monitoring with built-in leak detection at a typical 2.5 LPM / 0.67 GPM flow rate.
How to Choose the Right Water Purification System
Selecting a lab water system starts with the water grade your assays require, then aligns feed conditions, throughput, and site power. Match these axes to your bench workflow before specifying a unit.
- Water Quality (Type I vs. lower grades): Type I at 18.2 MΩ·cm suits HPLC, ICP-MS, and trace organic analysis where ionic and organic contamination must be minimized.
- TOC Requirement: sub-5 ppb output with an integrated monitor matters for analytical and organic chemistry that is sensitive to organic carbon.
- Feed Water Quality: confirm your source meets the under 20 µS/cm feed requirement so cartridges deliver rated performance and life.
- Flow Rate: a typical 2.5 LPM / 0.67 GPM supports routine fill volumes; verify it covers your peak demand.
- Dispense Configuration: remote dispense lets you place the draw point where work happens, separate from the purification housing.
- Voltage and Footprint: confirm 120V/60Hz availability and the 21.6 × 14.7 × 14.4 inch bench space at the install location.
Specifications
| Specification | Detail |
|---|---|
| Voltage | 115V |
| Type | Type I ultrapure water purification system |
| Purification Process | Conditioning and polishing cartridges plus UV oxidation (185/254 nm) for bacteria sterilization and TOC reduction, with a 0.2 µm final filter |
| TOC | < 5 ppb |
| TOC Monitor | Integrated TOC monitor |
| Dispense Configuration | Remote dispense |
| Power | 120V / 60 Hz |
| Application | Organic and analytical chemistry — ultrapure, analytical, low TOC |
| Water Quality | Type I ultrapure — 18.2 MΩ·cm resistivity |
| Bacteria | < 1 cfu/ml |
| Flow Rate | 2.5 LPM / 0.67 GPM (typical) |
| Feed Water Requirement | < 20 µS/cm |
| Final Filter | 0.2 micron |
| Monitoring | Real-time quality monitoring with leak detection |
| Cartridges | Quick-change, no-tools design; premium ResinTech ion-exchange media |
| Dimensions (H × W × D) | 21.6" × 14.7" × 14.4" (54.8 × 37 × 36.5 cm) in |
| Country of Origin | United States |
| GTIN (Barcode) | 797059929368 |
| Shipping Weight | 49.5 lbs |
| Dimensions (L × W × H) | 26.5 × 26.63 × 20.3 in |
| ISO 9001:2015 | Contact Customer Service |
Available Sizes and Configurations
| SKU | Configuration | Pack |
|---|---|---|
| WC-301UVTR | EA | EA |
Documentation
More in This Series
- Distilled / Deionized Water Purification System ~1.8L/Hr. 20L Tank With External Transformer
- Distilled / Deionized Water Purification System ~1.8L/Hr. 30L Tank With External Transformer
- Distilled / Deionized Waterpurification System ~1.8L/Hr. 30L Tank With External Transformer
- Distilled / Deionized Water Purification System ~5L/Hr. 100L Tank Single Phase With External Transformer
- Deionized Water Purification System 0.5~1.0L/Min 115
- Benchtop Or Wall Mount Base System, /60Hz
- Benchtop Or Wall Mount Base System, /50Hz
- Remote Dispense Configuration Base System, /60Hz
- Remote Dispense Configuration Base System, /50Hz
- Benchtop - With Uv Oxidation Lamp Installed, /60Hz
- Benchtop - With Uv Oxidation Lamp Installed, /50Hz
- Benchtop - With Uv Oxidation Lamp And Toc Monitor /60Hz
- Benchtop - With Uv Oxidation Lamp And Toc Monitor /50Hz
- Remote Dispense Configuration - With Uv Oxidation Lamp, /60Hz
- Remote Dispense Configuration - With Uv Oxidation Lamp, /50Hz
- Remote Dispense - With Uv Oxidation Lamp And Toc Monitor /50Hz
- Benchtop - With Ultrafiltration Module, /60Hz
- Benchtop - With Ultrafiltration Module, /50Hz
- Remote Dispense Configuration - With Ultrafiltration Module, /60Hz
- Remote Dispense Configuration - With Ultrafiltration Module, /50Hz
- Benchtop - With Uv And Uf Installed, /60Hz
- Benchtop - With Uv And Uf Installed, /50Hz
- Benchtop - With Uv, Uf And Toc Monitor Installed, /60Hz
- Benchtop - With Uv, Uf And Toc Monitor Installed, /50Hz
- Remote Dispense Configuration - With Uv And Uf Installed, /60Hz
- Remote Dispense Configuration - With Uv And Uf Installed, /50Hz
- Remote Dispense - With Uv, Uf And Toc Monitor Installed, /60Hz
- Remote Dispense - With Uv, Uf And Toc Monitor Installed, /50Hz
- Direct Feed Option (Factory Installed)
- Wall Mount Bracket
- Dispensing Gun Option (Factory Installed)
- High Purity Di System - 2-1/2" Diameter (10" Carbon, (2) 20" Mixed Bed, & 200 K Di Light)
- High Capacity Di System - 2-1/2" Diameter (10" Carbon, (2) 20" High Capacity Di, & 20 K Di Light)
- High Purity Di System- 4-1/2" Diameter (10" Carbon, (2) 20" Mixed Bed, & 200 K Di Light)
- High Capacity Di System- 4-1/2" Diameter (10" Carbon, (2) 20" High Capacity Di, & 20 K Di Light)
Why Buy From LabSupplies.com
LabSupplies.com is an authorized Yamato Scientific dealer, so every WC301UVTR ships as a genuine factory unit backed by the manufacturer warranty. Order directly and we fulfill from USA inventory.
- Authorized Yamato Scientific dealer: genuine equipment with full manufacturer warranty.
- In stock: ready to ship from USA inventory.
- Lab-equipment specialists: dedicated support for purification specs and configuration questions.
Frequently Asked Questions
What water quality does the WC301UVTR produce?
It produces Type I ultrapure water at 18.2 MΩ·cm resistivity. Bacteria levels stay under 1 cfu/ml, making it suitable for analytical and organic chemistry applications.
What TOC level does this system achieve?
TOC output is below 5 ppb. An integrated TOC monitor tracks total organic carbon in real time, supported by a 185/254 nm UV oxidation lamp that reduces organic contamination.
What voltage and power does the WC301UVTR require?
The system runs on 120V / 60 Hz. Confirm a matching circuit is available at your install location before ordering.
What is the typical flow rate and feed water requirement?
Typical flow rate is 2.5 LPM / 0.67 GPM. Feed water should measure under 20 µS/cm so the conditioning and polishing cartridges deliver rated performance.
What are the dimensions and weight of the unit?
The system measures 21.6 × 14.7 × 14.4 inches (54.8 × 37 × 36.5 cm) and weighs 49.5 lbs. Plan bench space for the remote dispense configuration accordingly.
Where is the WC301UVTR manufactured?
It is made in the USA. LabSupplies.com is an authorized Yamato Scientific dealer and ships genuine units from USA inventory.