Remote Dispense Configuration - With Uv And Uf Installed, /60Hz Overview
The Remote Dispense Configuration - With Uv And Uf Installed, /60Hz (model WG301UVUFR) is a Type I ultrapure water purification system from Yamato Scientific, supplied through LabSupplies.com as an authorized dealer. This compact unit produces 18.2 MΩ·cm resistivity water with integrated UV oxidation and ultrafiltration for genetics testing and biological work.
Purification pairs conditioning and polishing cartridges with premium ResinTech ion-exchange media. A UV oxidation lamp and 0.2 micron ultrafiltration stage handle bacteria sterilization, TOC reduction, and pyrogen removal. Quick-change cartridges install without tools, while real-time monitoring tracks output quality alongside leak detection.
Operating at 120V/60 Hz, the system holds a 21.6 × 14.7 × 14.4 inch footprint and weighs 51 lbs. Remote dispense routing positions the polishing point near the bench for flexible lab layouts. Made in the USA, this unit ships from domestic inventory.
Key Features
- Water quality: Type I ultrapure output at 18.2 MΩ·cm resistivity with TOC below 5 ppb.
- Purification process: conditioning and polishing cartridges plus UV oxidation and ultrafiltration, finished by a 0.2 micron filter.
- Bacteria control: less than 1 cfu/ml, with pyrogen removal and TOC reduction built into the UF stage.
- Flow rate: 2.5 LPM / 0.67 GPM typical, fed by source water under 20 µS/cm.
- Quick-change cartridges: no-tools design using premium ResinTech ion-exchange media.
- Monitoring: real-time quality readout with integrated leak detection.
How to Choose the Right Water Purification System
Match the system to your required water grade, throughput, and incoming feed quality before specifying a unit. Key axes below help procurement teams confirm fit for genetics, biological, and low-TOC applications.
- Water grade: Type I ultrapure (18.2 MΩ·cm) suits sensitive molecular and biological work, where TOC below 5 ppb matters.
- Purification process: confirm UV oxidation and ultrafiltration are present if bacteria, pyrogen, and TOC reduction are critical.
- Feed water requirement: source water must measure under 20 µS/cm for rated performance.
- Dispense configuration: remote dispense places the polishing point near the bench versus integrated dispensing.
- Voltage: verify the 120V/60 Hz supply matches your facility circuits.
- Footprint: the 21.6 × 14.7 × 14.4 inch chassis fits compact bench or under-counter spaces.
Specifications
| Specification | Detail |
|---|---|
| Voltage | 115V |
| Type | Type I ultrapure water purification system |
| Purification Process | Conditioning and polishing cartridges plus UV oxidation and ultrafiltration (bacteria sterilization, TOC reduction, pyrogen removal), with a 0.2 µm final filter |
| TOC | < 5 ppb |
| TOC Monitor | Not included |
| Dispense Configuration | Remote dispense |
| Power | 120V / 60 Hz |
| Application | Genetics testing and biological work — ultrapure, biological, low TOC |
| Water Quality | Type I ultrapure — 18.2 MΩ·cm resistivity |
| Bacteria | < 1 cfu/ml |
| Flow Rate | 2.5 LPM / 0.67 GPM (typical) |
| Feed Water Requirement | < 20 µS/cm |
| Final Filter | 0.2 micron |
| Monitoring | Real-time quality monitoring with leak detection |
| Cartridges | Quick-change, no-tools design; premium ResinTech ion-exchange media |
| Dimensions (H × W × D) | 21.6" × 14.7" × 14.4" (54.8 × 37 × 36.5 cm) in |
| Country of Origin | United States |
| GTIN (Barcode) | 797059929467 |
| Shipping Weight | 51 lbs |
| Dimensions (L × W × H) | 26.5 × 26.63 × 20.3 in |
| ISO 9001:2015 | Contact Customer Service |
Available Sizes and Configurations
| SKU | Configuration | Pack |
|---|---|---|
| WG-301UVUFR | EA | EA |
Documentation
More in This Series
- Distilled / Deionized Water Purification System ~1.8L/Hr. 20L Tank With External Transformer
- Distilled / Deionized Water Purification System ~1.8L/Hr. 30L Tank With External Transformer
- Distilled / Deionized Waterpurification System ~1.8L/Hr. 30L Tank With External Transformer
- Distilled / Deionized Water Purification System ~5L/Hr. 100L Tank Single Phase With External Transformer
- Deionized Water Purification System 0.5~1.0L/Min 115
- Benchtop Or Wall Mount Base System, /60Hz
- Benchtop Or Wall Mount Base System, /50Hz
- Remote Dispense Configuration Base System, /60Hz
- Remote Dispense Configuration Base System, /50Hz
- Benchtop - With Uv Oxidation Lamp Installed, /60Hz
- Benchtop - With Uv Oxidation Lamp Installed, /50Hz
- Benchtop - With Uv Oxidation Lamp And Toc Monitor /60Hz
- Benchtop - With Uv Oxidation Lamp And Toc Monitor /50Hz
- Remote Dispense Configuration - With Uv Oxidation Lamp, /60Hz
- Remote Dispense Configuration - With Uv Oxidation Lamp, /50Hz
- Remote Dispense - With Uv Oxidation Lamp And Toc Monitor /60Hz
- Remote Dispense - With Uv Oxidation Lamp And Toc Monitor /50Hz
- Benchtop - With Ultrafiltration Module, /60Hz
- Benchtop - With Ultrafiltration Module, /50Hz
- Remote Dispense Configuration - With Ultrafiltration Module, /60Hz
- Remote Dispense Configuration - With Ultrafiltration Module, /50Hz
- Benchtop - With Uv And Uf Installed, /60Hz
- Benchtop - With Uv And Uf Installed, /50Hz
- Benchtop - With Uv, Uf And Toc Monitor Installed, /60Hz
- Benchtop - With Uv, Uf And Toc Monitor Installed, /50Hz
- Remote Dispense Configuration - With Uv And Uf Installed, /50Hz
- Remote Dispense - With Uv, Uf And Toc Monitor Installed, /60Hz
- Remote Dispense - With Uv, Uf And Toc Monitor Installed, /50Hz
- Direct Feed Option (Factory Installed)
- Wall Mount Bracket
- Dispensing Gun Option (Factory Installed)
- High Purity Di System - 2-1/2" Diameter (10" Carbon, (2) 20" Mixed Bed, & 200 K Di Light)
- High Capacity Di System - 2-1/2" Diameter (10" Carbon, (2) 20" High Capacity Di, & 20 K Di Light)
- High Purity Di System- 4-1/2" Diameter (10" Carbon, (2) 20" Mixed Bed, & 200 K Di Light)
- High Capacity Di System- 4-1/2" Diameter (10" Carbon, (2) 20" High Capacity Di, & 20 K Di Light)
Why Buy From LabSupplies.com
LabSupplies.com sells the Yamato Scientific WG301UVUFR as a stocked, ready-to-ship purification system. Order directly and receive a genuine unit backed by the manufacturer warranty.
- Authorized Yamato Scientific dealer: genuine equipment with full manufacturer warranty.
- In stock: ships from USA inventory.
- Made in the USA: domestically manufactured purification system.
- Lab-equipment specialists: dedicated support for specification and configuration questions.
Frequently Asked Questions
What power supply does the WG301UVUFR require?
The WG301UVUFR runs on 120V / 60 Hz. Confirm your facility circuit matches this single-voltage configuration before installation.
What water quality does this system produce?
It produces Type I ultrapure water at 18.2 MΩ·cm resistivity, with TOC below 5 ppb and bacteria under 1 cfu/ml. UV oxidation and ultrafiltration deliver low-TOC, biological-grade output.
What are the system dimensions and weight?
The unit measures 21.6 × 14.7 × 14.4 inches (54.8 × 37 × 36.5 cm) and weighs 51 lbs. Its compact chassis fits bench or under-counter installations.
What feed water quality is needed?
Source water must measure under 20 µS/cm. The system uses conditioning and polishing cartridges, UV oxidation, and a 0.2 micron ultrafiltration final filter to reach Type I quality.
Is a TOC monitor included?
No, a TOC monitor is not included with the WG301UVUFR. The system does provide real-time quality monitoring with leak detection.
How are the cartridges replaced?
Cartridges use a quick-change, no-tools design with premium ResinTech ion-exchange media. This simplifies maintenance and supports a low cost of ownership.