Yamato IC903CW General Purpose Incubator With Window 567L

General Purpose Incubator With Window 567L Overview

The General Purpose Incubator With Window 567L (model IC903CW) is a 567 L natural convection incubator from Yamato Scientific, supplied by LabSupplies.com as an authorized dealer. Operating across ambient +5 to 80°C, this unit pairs a large chamber with dual reinforced-glass observation doors so technicians can view contents without disturbing the internal atmosphere.

Air-jacket technology distributes heat evenly through the 1070 × 530 × 1000 mm interior. A stainless steel chamber resists corrosion, while the cold-rolled steel exterior carries a melamine resin baked finish. Glass fiber insulation surrounds the cavity, and a 2.2 kW iron-chrome wire heater drives recovery. PID microprocessor control with a K-thermocouple sensor holds ±0.5°C accuracy at 37°C.

Two voltage builds cover differing lab power: IC903CW runs on 115V and IC913CW on 220V. Each cabinet measures 51 × 31 × 73 inches and weighs 550 lbs, so freight and floor space should be planned accordingly. Country of origin is Switzerland (CH). Self-diagnostic functions and automatic overheat prevention guard samples during unattended runs.

Key Features

• Dual observation doors: two reinforced-glass inner doors let staff inspect samples while keeping the chamber atmosphere undisturbed.
• Natural convection air jacket: air-jacket heat transfer spreads temperature evenly to a ±1.0°C distribution across the 567 L chamber.
• PID microprocessor control: digital setting display plus integrated timer with K-thermocouple sensing and ±0.5°C accuracy at 37°C.
• Operation functions: fixed temperature, auto start/stop, and quick auto stop support scheduled and continuous protocols.
• Built-in safeguards: self-diagnostic checks for sensor, display, and measured-temperature errors, plus automatic overheat prevention, calibration off-set, and key lock.
• Voltage options: IC903CW for 115V supply and IC913CW for 220V supply.

How to Choose the Right Incubator

Matching an incubator to your workflow means weighing chamber size, temperature handling, and site power against the samples and throughput you run daily. Use these axes to confirm the IC903CW family fits your application.

• Capacity: the 567 L chamber suits labs batching many plates or flasks at once; size the interior to peak load, not average load.
• Temperature range: an ambient +5 to 80°C span covers standard 37°C culture work and higher-temperature general drying or warming tasks.
• Control type: PID microprocessor regulation with a K-thermocouple sensor delivers ±0.5°C accuracy at 37°C for protocols that demand stable set points.
• Voltage: select IC903CW for 115V circuits or IC913CW for 220V circuits to match your facility power.
• Footprint and weight: the 51 × 31 × 73 inch cabinet at 550 lbs requires verified floor space and freight planning before installation.
• Safety features: self-diagnostic monitoring and automatic overheat prevention matter for long unattended incubation cycles.

Specifications

^*1 No-load operation of bath only; maximum temperature varies with circumstances and operating conditions. ^*2 Measured under ambient temperature 23°C ±5°C, humidity 65%RH ±20%, per Yamato Scientific test conditions.

Available Sizes and Configurations

Documentation

• Product Brochure
• Yamato Scientific Official Product Page

More in This Series

• General Purpose Benchtop Incubator 37L
• General Purpose Benchtop Incubator With Window 37L
• General Purpose Incubator With Window 97L
• General Purpose Incubator With Window 159L
• General Purpose Incubator With Window 318L
• Refrigerated Incubator Programmable 143L
• Refrigerated Incubator Programmable 286L
• Refrigerated Incubator Programmable With Window & Shaker Power Hook Up 143L
• Refrigerated Incubator Programmable With Window 286L
• Refrigerated Incubator Programmable 143L With Window & Mk-161 Shaker
• Refrigerated Eco Incubator Programmable 286L

Why Buy From LabSupplies.com

LabSupplies.com supplies the Yamato Scientific IC903CW and IC913CW as an authorized dealer, so every unit ships as a genuine factory product backed by the manufacturer warranty. Order directly online and route spec questions to our lab-equipment specialists.

• Authorized Yamato Scientific dealer: genuine equipment with full manufacturer warranty coverage.
• In stock: ready to order and dispatch without backorder delays.
• Ships from USA inventory: domestic fulfillment for faster transit.
• Lab-equipment specialists: dedicated support for configuration and specification questions.

Frequently Asked Questions

What is the temperature range of the IC903CW incubator?

The IC903CW operates from ambient +5°C up to 80°C. Temperature accuracy is ±0.5°C at 37°C, with a chamber distribution of ±1.0°C, controlled by a PID microprocessor and K-thermocouple sensor.

How large is the chamber and overall footprint?

The chamber holds 567 L with internal dimensions of 1070 × 530 × 1000 mm. The full cabinet measures 51 × 31 × 73 inches and weighs 550 lbs, so verify floor space and freight access before delivery.

What voltage does this incubator require?

Two builds are available: IC903CW runs on 115V and IC913CW runs on 220V. Both share identical chamber, control, and construction specifications; the voltage is the only difference.

What materials are used in the chamber and exterior?

The interior is stainless steel for corrosion resistance. The exterior is cold-rolled steel plate with a melamine resin baked finish, and the chamber is surrounded by glass fiber insulation.

Can samples be viewed without opening the incubator?

Yes. The unit uses a dual-door system with two reinforced-glass observation doors, allowing staff to inspect contents while the inner door keeps the chamber atmosphere undisturbed.

What safety features protect samples during long runs?

The IC903CW includes self-diagnostic functions for sensor, display, and measured-temperature errors, plus automatic overheat prevention, calibration off-set, and a key lock to guard unattended incubation.