Remote Dispense Configuration - With Uv Oxidation Lamp, /50Hz Overview
The Yamato Scientific WC311UVR Remote Dispense Water Purification System is a Type I ultrapure water purifier that delivers 18.2 MΩ·cm resistivity water for organic and analytical chemistry. Sold by LabSupplies.com, authorized dealer, this compact 220V/50 Hz unit pairs conditioning and polishing cartridges with a UV oxidation lamp to produce low-TOC water at the point of use.
Purification runs through quick-change, no-tools cartridges loaded with premium ResinTech ion-exchange media, followed by 185/254 nm UV oxidation for bacteria sterilization and TOC reduction. A 0.2 micron final filter polishes every dispense, holding TOC below 5 ppb and bacteria under 1 cfu/ml. Real-time quality monitoring with leak detection tracks output continuously.
Operating on 220V/50 Hz, the system occupies a 21.6" × 14.7" × 14.4" footprint and ships at 49.5 lbs. Remote dispense configuration separates the dispenser from the unit body, freeing bench space at the work point. Manufactured in the US, the WC311UVR requires feed water below 20 µS/cm and delivers a typical 2.5 LPM flow rate.
Key Features
- Type I ultrapure output: produces 18.2 MΩ·cm resistivity water with TOC < 5 ppb and bacteria < 1 cfu/ml.
- UV oxidation lamp: dual-wavelength 185/254 nm UV provides bacteria sterilization and TOC reduction.
- Multi-stage purification: conditioning and polishing cartridges plus a 0.2 micron final filter polish each dispense.
- Quick-change cartridges: no-tools design with premium ResinTech ion-exchange media simplifies maintenance.
- Real-time monitoring: continuous water-quality readout with integrated leak detection.
- Remote dispense configuration: separates the dispenser from the unit body to conserve bench space at the point of use.
How to Choose the Right Water Purification System
Selecting a lab water system starts with the water grade your protocols demand, then the dispense setup, power, and feed conditions that fit your bench and facility. Match these axes to your workflow .
- Water grade: Type I ultrapure water at 18.2 MΩ·cm with low TOC suits HPLC, organic, and analytical chemistry where trace contaminants skew results.
- Dispense configuration: remote dispense places the dispenser away from the unit body, valuable where bench space near the work point is limited.
- Voltage and power: confirm site power matches the unit; this model runs on 220V/50 Hz.
- Feed water requirement: verify your source measures below 20 µS/cm, the inlet condition this system expects.
- Footprint and weight: the 21.6" × 14.7" × 14.4" body and 49.5 lb shipping weight determine bench or wall placement.
- Monitoring needs: real-time quality readout and leak detection matter for unattended or regulated environments; note the TOC monitor is not included.
Specifications
| Specification | Detail |
|---|---|
| Voltage | 220V |
| Type | Type I ultrapure water purification system |
| Purification Process | Conditioning and polishing cartridges plus UV oxidation (185/254 nm) for bacteria sterilization and TOC reduction, with a 0.2 µm final filter |
| TOC | < 5 ppb |
| TOC Monitor | Not included |
| Dispense Configuration | Remote dispense |
| Power | 220V / 50 Hz |
| Application | Organic and analytical chemistry — ultrapure, analytical, low TOC |
| Water Quality | Type I ultrapure — 18.2 MΩ·cm resistivity |
| Bacteria | < 1 cfu/ml |
| Flow Rate | 2.5 LPM / 0.67 GPM (typical) |
| Feed Water Requirement | < 20 µS/cm |
| Final Filter | 0.2 micron |
| Monitoring | Real-time quality monitoring with leak detection |
| Cartridges | Quick-change, no-tools design; premium ResinTech ion-exchange media |
| Dimensions (H × W × D) | 21.6" × 14.7" × 14.4" (54.8 × 37 × 36.5 cm) in |
| Country of Origin | United States |
| GTIN (Barcode) | 797059929351 |
| Shipping Weight | 49.5 lbs |
| Dimensions (L × W × H) | 26.5 × 26.63 × 20.3 in |
| ISO 9001:2015 | Contact Customer Service |
Available Sizes and Configurations
| SKU | Configuration | Pack |
|---|---|---|
| WC-311UVR | EA | EA |
Documentation
More in This Series
- Distilled / Deionized Water Purification System ~1.8L/Hr. 20L Tank With External Transformer
- Distilled / Deionized Water Purification System ~1.8L/Hr. 30L Tank With External Transformer
- Distilled / Deionized Waterpurification System ~1.8L/Hr. 30L Tank With External Transformer
- Distilled / Deionized Water Purification System ~5L/Hr. 100L Tank Single Phase With External Transformer
- Deionized Water Purification System 0.5~1.0L/Min 115
- Benchtop Or Wall Mount Base System, /60Hz
- Benchtop Or Wall Mount Base System, /50Hz
- Remote Dispense Configuration Base System, /60Hz
- Remote Dispense Configuration Base System, /50Hz
- Benchtop - With Uv Oxidation Lamp Installed, /60Hz
- Benchtop - With Uv Oxidation Lamp Installed, /50Hz
- Benchtop - With Uv Oxidation Lamp And Toc Monitor /60Hz
- Benchtop - With Uv Oxidation Lamp And Toc Monitor /50Hz
- Remote Dispense Configuration - With Uv Oxidation Lamp, /60Hz
- Remote Dispense - With Uv Oxidation Lamp And Toc Monitor /60Hz
- Remote Dispense - With Uv Oxidation Lamp And Toc Monitor /50Hz
- Benchtop - With Ultrafiltration Module, /60Hz
- Benchtop - With Ultrafiltration Module, /50Hz
- Remote Dispense Configuration - With Ultrafiltration Module, /60Hz
- Remote Dispense Configuration - With Ultrafiltration Module, /50Hz
- Benchtop - With Uv And Uf Installed, /60Hz
- Benchtop - With Uv And Uf Installed, /50Hz
- Benchtop - With Uv, Uf And Toc Monitor Installed, /60Hz
- Benchtop - With Uv, Uf And Toc Monitor Installed, /50Hz
- Remote Dispense Configuration - With Uv And Uf Installed, /60Hz
- Remote Dispense Configuration - With Uv And Uf Installed, /50Hz
- Remote Dispense - With Uv, Uf And Toc Monitor Installed, /60Hz
- Remote Dispense - With Uv, Uf And Toc Monitor Installed, /50Hz
- Direct Feed Option (Factory Installed)
- Wall Mount Bracket
- Dispensing Gun Option (Factory Installed)
- High Purity Di System - 2-1/2" Diameter (10" Carbon, (2) 20" Mixed Bed, & 200 K Di Light)
- High Capacity Di System - 2-1/2" Diameter (10" Carbon, (2) 20" High Capacity Di, & 20 K Di Light)
- High Purity Di System- 4-1/2" Diameter (10" Carbon, (2) 20" Mixed Bed, & 200 K Di Light)
- High Capacity Di System- 4-1/2" Diameter (10" Carbon, (2) 20" High Capacity Di, & 20 K Di Light)
Why Buy From LabSupplies.com
LabSupplies.com is an authorized Yamato Scientific dealer, so every WC311UVR ships as a genuine factory unit backed by the manufacturer warranty. Order directly and our lab-equipment specialists stand ready for any specification question before you commit.
- Authorized Yamato Scientific dealer: genuine unit with full manufacturer warranty.
- In stock: ready to ship from USA inventory.
- Made in USA: manufactured in the United States.
- Specialist support: dedicated lab-equipment experts for spec and configuration questions.
Frequently Asked Questions
What water quality does the WC311UVR produce?
The WC311UVR produces Type I ultrapure water at 18.2 MΩ·cm resistivity. It holds TOC below 5 ppb and bacteria under 1 cfu/ml, supporting organic and analytical chemistry that requires ultrapure, low-TOC water.
What voltage and power does this system require?
The WC311UVR operates on 220V/50 Hz. Confirm your facility power matches this requirement before installation, as the unit is configured specifically for this supply.
What feed water does the system need?
The WC311UVR requires feed water below 20 µS/cm conductivity. Verify your source water meets this inlet condition to ensure proper purification performance.
How does the UV oxidation lamp work in this unit?
The UV oxidation lamp uses dual wavelengths of 185 and 254 nm for bacteria sterilization and TOC reduction. It works alongside conditioning and polishing cartridges and a 0.2 micron final filter to polish each dispense.
What are the dimensions and shipping weight?
The unit body measures 21.6" × 14.7" × 14.4" (54.8 × 37 × 36.5 cm). Shipping weight is 49.5 lbs, and the system ships as a single component.
Is a TOC monitor included with the WC311UVR?
No, the TOC monitor is not included with the WC311UVR. The system does provide real-time water-quality monitoring with integrated leak detection. Contact our specialists about monitoring options.