Benchtop - With Uv And Uf Installed, /60Hz Overview
The Benchtop - With Uv And Uf Installed, /60Hz (model WG301UVUFB) is a Type I water purification system from Yamato Scientific, stocked by LabSupplies.com as an authorized dealer. Engineered for genetics testing and biological work, this unit produces 18.2 MΩ·cm ultrapure water with TOC below 5 ppb and bacteria under 1 cfu/ml.
Purification runs through conditioning and polishing cartridges, then a UV oxidation lamp and ultrafiltration stage that handle bacteria sterilization, TOC reduction, and pyrogen removal. A 0.2 micron final filter polishes the output. Quick-change, no-tools cartridges use premium ResinTech ion-exchange media, while real-time quality monitoring with leak detection tracks performance during operation.
Power is 120V / 60 Hz, drawing on a single standard circuit. Compact dimensions of 21.6 in H × 14.7 in W × 14.4 in D allow benchtop or wall-mount installation. Manufactured in the USA, the system weighs 37.4 lbs and feeds from supply water under 20 µS/cm.
Key Features
- Type I ultrapure output: delivers 18.2 MΩ·cm resistivity water with TOC under 5 ppb and bacteria below 1 cfu/ml.
- UV oxidation and ultrafiltration: combined stages provide bacteria sterilization, TOC reduction, and pyrogen removal.
- 0.2 micron final filter: polishes dispensed water for genetics and biological applications.
- Quick-change cartridges: no-tools design with premium ResinTech ion-exchange media for low cost of ownership.
- Real-time monitoring: continuous quality readout paired with integrated leak detection.
- Flexible installation: 2.5 LPM (0.67 GPM) typical flow with benchtop or wall-mount mounting.
How to Choose the Right Water Purification System
Selecting a purification system starts with the water grade your protocols demand, then the feed conditions and installation space at your bench. Match these axes to your workflow before ordering.
- Water quality grade: Type I ultrapure at 18.2 MΩ·cm suits genetics, cell culture, and TOC-sensitive analysis; lower grades fall short for these methods.
- Purification process: UV oxidation plus ultrafiltration adds bacteria sterilization and pyrogen removal beyond standard deionization.
- Flow rate: 2.5 LPM typical determines how quickly you can fill vessels during high-throughput sessions.
- Feed water requirement: confirm your supply runs under 20 µS/cm so the system performs to spec.
- Voltage and power: 120V / 60 Hz operation must match your available circuit.
- Footprint and mounting: a 21.6 × 14.7 × 14.4 in unit that mounts on bench or wall helps in tight lab spaces.
Specifications
| Specification | Detail |
|---|---|
| Voltage | 115V |
| Type | Type I ultrapure water purification system |
| Purification Process | Conditioning and polishing cartridges plus UV oxidation and ultrafiltration (bacteria sterilization, TOC reduction, pyrogen removal), with a 0.2 µm final filter |
| TOC | < 5 ppb |
| TOC Monitor | Not included |
| Dispense Configuration | Benchtop or wall-mount |
| Power | 120V / 60 Hz |
| Application | Genetics testing and biological work — ultrapure, biological, low TOC |
| Water Quality | Type I ultrapure — 18.2 MΩ·cm resistivity |
| Bacteria | < 1 cfu/ml |
| Flow Rate | 2.5 LPM / 0.67 GPM (typical) |
| Feed Water Requirement | < 20 µS/cm |
| Final Filter | 0.2 micron |
| Monitoring | Real-time quality monitoring with leak detection |
| Cartridges | Quick-change, no-tools design; premium ResinTech ion-exchange media |
| Dimensions (H × W × D) | 21.6" × 14.7" × 14.4" (54.8 × 37 × 36.5 cm) in |
| Country of Origin | United States |
| GTIN (Barcode) | 797059929429 |
| Shipping Weight | 37.4 lbs |
| Dimensions (L × W × H) | 26.5 × 18.63 × 20.3 in |
| ISO 9001:2015 | Contact Customer Service |
Available Sizes and Configurations
| SKU | Configuration | Pack |
|---|---|---|
| WG-301UVUFB | EA | EA |
Documentation
More in This Series
- Distilled / Deionized Water Purification System ~1.8L/Hr. 20L Tank With External Transformer
- Distilled / Deionized Water Purification System ~1.8L/Hr. 30L Tank With External Transformer
- Distilled / Deionized Waterpurification System ~1.8L/Hr. 30L Tank With External Transformer
- Distilled / Deionized Water Purification System ~5L/Hr. 100L Tank Single Phase With External Transformer
- Deionized Water Purification System 0.5~1.0L/Min 115
- Benchtop Or Wall Mount Base System, /60Hz
- Benchtop Or Wall Mount Base System, /50Hz
- Remote Dispense Configuration Base System, /60Hz
- Remote Dispense Configuration Base System, /50Hz
- Benchtop - With Uv Oxidation Lamp Installed, /60Hz
- Benchtop - With Uv Oxidation Lamp Installed, /50Hz
- Benchtop - With Uv Oxidation Lamp And Toc Monitor /60Hz
- Benchtop - With Uv Oxidation Lamp And Toc Monitor /50Hz
- Remote Dispense Configuration - With Uv Oxidation Lamp, /60Hz
- Remote Dispense Configuration - With Uv Oxidation Lamp, /50Hz
- Remote Dispense - With Uv Oxidation Lamp And Toc Monitor /60Hz
- Remote Dispense - With Uv Oxidation Lamp And Toc Monitor /50Hz
- Benchtop - With Ultrafiltration Module, /60Hz
- Benchtop - With Ultrafiltration Module, /50Hz
- Remote Dispense Configuration - With Ultrafiltration Module, /60Hz
- Remote Dispense Configuration - With Ultrafiltration Module, /50Hz
- Benchtop - With Uv And Uf Installed, /50Hz
- Benchtop - With Uv, Uf And Toc Monitor Installed, /60Hz
- Benchtop - With Uv, Uf And Toc Monitor Installed, /50Hz
- Remote Dispense Configuration - With Uv And Uf Installed, /60Hz
- Remote Dispense Configuration - With Uv And Uf Installed, /50Hz
- Remote Dispense - With Uv, Uf And Toc Monitor Installed, /60Hz
- Remote Dispense - With Uv, Uf And Toc Monitor Installed, /50Hz
- Direct Feed Option (Factory Installed)
- Wall Mount Bracket
- Dispensing Gun Option (Factory Installed)
- High Purity Di System - 2-1/2" Diameter (10" Carbon, (2) 20" Mixed Bed, & 200 K Di Light)
- High Capacity Di System - 2-1/2" Diameter (10" Carbon, (2) 20" High Capacity Di, & 20 K Di Light)
- High Purity Di System- 4-1/2" Diameter (10" Carbon, (2) 20" Mixed Bed, & 200 K Di Light)
- High Capacity Di System- 4-1/2" Diameter (10" Carbon, (2) 20" High Capacity Di, & 20 K Di Light)
Why Buy From LabSupplies.com
LabSupplies.com supplies the WG301UVUFB as an authorized Yamato Scientific dealer, so every unit ships genuine and backed by the manufacturer warranty. Our lab-equipment specialists answer spec questions before you order.
- Authorized Yamato Scientific dealer: genuine equipment with full manufacturer warranty.
- In stock: ready to ship from USA inventory.
- Ships from USA: domestic fulfillment for faster delivery.
- Lab-equipment specialists: direct support for purification, feed-water, and installation questions.
Frequently Asked Questions
What grade of water does the WG301UVUFB produce?
It produces Type I ultrapure water at 18.2 MΩ·cm resistivity, with TOC below 5 ppb and bacteria under 1 cfu/ml, suitable for genetics testing and biological work.
What voltage and power does this system require?
The WG301UVUFB runs on 120V / 60 Hz, drawing power from a single standard circuit.
What are the dimensions and weight of the unit?
The system measures 21.6 in H × 14.7 in W × 14.4 in D (54.8 × 37 × 36.5 cm) and weighs 37.4 lbs. It can be installed on a benchtop or wall-mounted.
What feed water quality is needed?
Supply water must measure under 20 µS/cm. The system then delivers a typical flow rate of 2.5 LPM (0.67 GPM).
Does this model include a TOC monitor?
No, a TOC monitor is not included on the WG301UVUFB. The unit does provide real-time water-quality monitoring with integrated leak detection.
How are the purification cartridges replaced?
Cartridges use a quick-change, no-tools design with premium ResinTech ion-exchange media, supporting low cost of ownership over the system's life.