Glassware Set C (Cold Finger Vertical) For Re-202-A/212-A And Rev-202M-A/212M-A Overview
The Glassware Set C (Cold Finger Vertical), model RG-202C, is a complete rotary evaporator glassware assembly built around a cold-finger vertical condenser engineered for volatile, low-boiling-point solvents. LabSupplies.com supplies this set as an authorized dealer of Yamato Scientific, delivering a genuine factory replacement for RE and REV series units.
Each set ships as a coordinated assembly: cooling condenser, rotary joint, evaporation flask, receiving flask, ball-joint clamp, flask clip, vacuum seal, and a condenser insulation kit. The cold-finger vertical geometry directs vapor through a compact condensing path, supporting recovery of solvents that flash off at low temperatures.
Set C is dimensioned for direct fitment to Yamato RE202A, RE212A, REV202MA, and REV212MA rotary evaporators. A condenser bracket and hex wrench accompany sets B and C, so installation hardware arrives in the box. Country of origin is China.
Key Features
- Cold-finger vertical condenser: Set C condenser geometry targets volatile and low-boiling-point solvent recovery.
- Complete glassware assembly: includes cooling condenser, rotary joint, evaporation flask, receiving flask, ball-joint clamp, flask clip, and vacuum seal.
- Condenser insulation kit: supplied with the set to maintain condensing efficiency on low-boiling fractions.
- Installation hardware included: condenser bracket and hex wrench accompany sets B and C for direct mounting.
- Model-matched fitment: engineered for Yamato RE202A, RE212A, REV202MA, and REV212MA rotary evaporators.
- Genuine Yamato Scientific part: factory glassware set, supplied through an authorized dealer.
How to Choose the Right Rotary Evaporator
Selecting a rotary evaporator glassware set starts with the condenser type, because vapor path and cooling method must match the solvents you distill. Use these criteria to confirm the correct configuration before ordering.
- Condenser type: cold-finger vertical (Set C) suits volatile, low-boiling-point solvents; vertical and diagonal sets address different vapor-handling needs.
- Model compatibility: verify the set is dimensioned for your exact unit — RG-202C fits RE202A, RE212A, REV202MA, and REV212MA.
- Included components: confirm the assembly carries every flask, joint, clamp, and seal your workflow requires so no separate sourcing is needed.
- Installation hardware: check that mounting parts such as the condenser bracket and wrench ship with the set.
- Solvent volatility: match condenser cooling capacity to the boiling points and recovery rates of your target solvents.
- Spare-part strategy: a full set replaces damaged or contaminated glassware as a coordinated unit, reducing downtime.
Specifications
| Specification | Detail |
|---|---|
| Type | Rotary evaporator glassware set |
| Condenser | Set C — cold-finger vertical condenser, for volatile / low-boiling-point solvents |
| Included | Cooling condenser, rotary joint, evaporation flask, receiving flask, ball-joint clamp, flask clip, vacuum seal, condenser insulation kit; condenser bracket and hex wrench for sets B/C |
| Compatible Models | RE-202-A / 212-A and REV-202M-A / 212M-A |
| Country of Origin | China |
Available Sizes and Configurations
| SKU | Configuration | Pack |
|---|---|---|
| RG-202C | EA | EA |
More in This Series
- Rotary Evaporator (Main Unit) Digital
- Re-202-A Rotary Evaporator, Bm-302-A Water Bath (5L), Glassware A
- Re-202-A Rotary Evaporator, Bm-302-A Water Bath (5L), Glassware B
- Re-202-A Rotary Evaporator, Bm-302-A Water Bath (5L), Glassware C
- Re-202-A Rotary Evaporator, Bo-302-A Oil Bath (5L), Glassware A
- Re-202-A Rotary Evaporator, Bo-302-A Oil Bath (5L), Glassware B
- Re-202-A Rotary Evaporator, Bo-302-A Oil Bath (5L), Glassware C
- Re-212-A Rotary Evaporator, Bm-312-A Water Bath (5L), Glassware A
- Re-212-A Rotary Evaporator, Bm-312-A Water Bath (5L), Glassware B
- Re-212-A Rotary Evaporator, Bm-312-A Water Bath (5L), Glassware C
- Re-212-A Rotary Evaporator, Bm-312-A Oil Bath (5L), Glassware A
- Re-212-A Rotary Evaporator, Bm-312-A Oil Bath (5L), Glassware B
- Re-212-A Rotary Evaporator, Bm-312-A Oil Bath (5L), Glassware C
- Rotary Evaporator (Main Unit) Digital With Vacuum Regulator
- Rev-202M-A Rotary Evaporator With Vacuum Regulator, Bm-302-A Water Bath (5L), Glassware A
- Rev-202M-A Rotary Evaporator With Vacuum Regulator, Bm-302-A Water Bath (5L), Glassware B
- Rev-202M-A Rotary Evaporator With Vacuum Regulator, Bm-302-A Water Bath (5L), Glassware C
- Rev-202M-A Rotary Evaporator With Vacuum Regulator, Bo-302-A Oil Bath (5L), Glassware A
- Rev-202M-A Rotary Evaporator With Vacuum Regulator, Bo-302-A Oil Bath (5L), Glassware B
- Rev-202M-A Rotary Evaporator With Vacuum Regulator, Bo-302-A Oil Bath (5L), Glassware C
- Rev-212M-A Rotary Evaporator With Vacuum Regulator, Bm-312-A Water Bath (5L), Glassware A
- Rev-212M-A Rotary Evaporator With Vacuum Regulator, Bm-312-A Water Bath (5L), Glassware B
- Rev-212M-A Rotary Evaporator With Vacuum Regulator, Bm-312-A Water Bath (5L), Glassware C
- Rev-212M-A Rotary Evaporator With Vacuum Regulator, Bo-312-A Oil Bath (5L), Glassware A
- Rev-212M-A Rotary Evaporator With Vacuum Regulator, Bo-312-A Oil Bath (5L), Glassware B
- Rev-212M-A Rotary Evaporator With Vacuum Regulator, Bo-312-A Oil Bath (5L), Glassware C
- Glassware Set A (Standard Diagonal) For Re-202-A/212-A And Rev-202M-A/212M-A
- Glassware Set B (Vertical High Boiling Point) For Re-202-A/212-A And Rev-202M-A/212M-A
- Vacuum Regulator For Re-202-A/212-A
- Vacuum Controller For Re-202-A/212-A (Latin America Countries)
Why Buy From LabSupplies.com
LabSupplies.com is an authorized Yamato Scientific dealer, so the RG-202C arrives as a genuine factory glassware set backed by manufacturer support. Order directly and have your set shipped without a quote request or callback step.
- Authorized Yamato Scientific dealer: genuine glassware set with manufacturer warranty.
- In stock: ready to ship from USA inventory.
- Direct ordering: add to cart and check out — no contact-to-order step.
- Lab-equipment specialists: on hand for fitment and specification questions.
Frequently Asked Questions
Which rotary evaporators is the RG-202C glassware set compatible with?
The RG-202C fits Yamato RE202A, RE212A, REV202MA, and REV212MA rotary evaporators. It is dimensioned for direct fitment to these specific models.
What type of condenser is included in Set C?
Set C uses a cold-finger vertical condenser. This geometry is engineered for volatile and low-boiling-point solvents.
What components come with the RG-202C set?
The set includes a cooling condenser, rotary joint, evaporation flask, receiving flask, ball-joint clamp, flask clip, vacuum seal, and a condenser insulation kit. A condenser bracket and hex wrench also accompany sets B and C.
Does the set include installation hardware?
Yes. A condenser bracket and hex wrench are supplied with sets B and C, so the mounting hardware arrives in the box.
Is the RG-202C a genuine Yamato Scientific part?
Yes. LabSupplies.com supplies the RG-202C as an authorized Yamato Scientific dealer, so it is a genuine factory glassware set. Country of origin is China.
What is the unit of measure for the RG-202C?
The RG-202C is sold each (EA) as a complete glassware set. One order supplies the full coordinated assembly for your rotary evaporator.