Why order the AW47 from LabSupplies.com
Semi-Automatic Benchtop Laboratory Glassware Washer Overview
The Semi-Automatic Benchtop Laboratory Glassware Washer (Yamato Scientific AW47) is a compact glassware washer that cleans up to 450 test tubes (16.5 ml) or 36 volumetric flasks (100 ml) per cycle, with a washing water temperature adjustable from room temperature to 60°C. LabSupplies.com supplies this unit as an authorized Yamato Scientific dealer.
Key Features
- Built-in 1 kW heater: heats washing water on board, eliminating boiler piping and a separate water-heating system.
- Simple time-set operation: set the wash time from 0 to 60 minutes, then start.
- High cycle capacity: holds 450 test tubes (16.5 ml) or 36 volumetric flasks (100 ml) on the standard table stand.
- Optional jet rack: fixes the nozzles to clean hard-to-reach glassware with narrow necks or bodies.
How to Choose the Right Glassware Washer
Matching a benchtop washer to your workflow comes down to load size, the glassware geometry you run, and the power available at the install point. Review these axes before specifying a unit.
- Capacity: confirm the per-cycle load fits your throughput — this washer handles 450 test tubes (16.5 ml) or 36 volumetric flasks (100 ml).
- Glassware geometry: narrow-neck flasks and tubes clean better with the optional jet rack, which fixes the nozzles for targeted spray.
- Voltage and site power: select 115V or 220V to match your bench circuit; the 200 W pump and 1 kW heater set the electrical demand.
- Footprint and utilities: external dimensions of W450 × D490 × H875 mm and a 0.1–0.3 MPa supply requirement determine bench and plumbing fit.
Specifications
| Specification | Detail |
|---|---|
| Voltage | 115V |
| Type | Semi-automatic benchtop glassware washer |
| Cleaning Method | Upward/downward two-way pressurized water jet with rotating jet nozzles (fixed when using the optional jet rack) |
| Capacity | 450 test tubes (16.5 ml) or 36 volumetric flasks (100 ml) |
| Washing Water Temperature | Room temperature to 60°C |
| Washing Time | 0–60 minutes (settable) |
| Water Heater | Built-in 1 kW heater — no boiler piping required |
| Supply Water Pressure | 0.1–0.3 MPa |
| Pump | 200 W |
| Glassware Stand | Table (standard); jet and test-tube racks optional |
| Water Supply / Drain | Electromagnetic valve open/close; natural drainage by water-level gap |
| Interior Material | Stainless steel |
| Exterior Material | Chrome-free electrogalvanized steel with chemical-resistant paint |
| Interior Dimensions | W420 × D450 × H570 mm |
| External Dimensions | W450 × D490 × H875 mm |
| Country of Origin | Japan |
| GTIN (Barcode) | 797059931705 |
| Shipping Weight | 200 lbs |
| Shipping Dimensions (L × W × H) | 36 × 36 × 62 in |
| Warranty | 1 year (Yamato Scientific America) |
| Service | Calibration and preventive maintenance on site by Yamato-certified technicians or at Yamato's California service center |
Ordering Information
| Catalog number | Configuration | GTIN / UPC |
|---|---|---|
| AW-47-115V | 115V | 797059931705 |
| AW-47-220V | 220V | 797059931712 |
| Manufacturer | Yamato Scientific |
| Manufacturer part numbers | AW-47-115V, AW-47-220V |
| UNSPSC | 31161800 — Washers |
| HTS code | 8422.20.0000 |
| Export classification (ECCN) | EAR99 |
Documents & Downloads
More in This Series
- Yamato AWD510 Laboratory Glassware Washer (Process Monitorable)
- Yamato AWD510DRY Laboratory Glassware Washer (Process Monitorable) Optional Pre-Drying
View all Laboratory Glassware Washers →
Frequently Asked Questions
What is the washing water temperature range of the AW47?
The AW47 heats washing water from room temperature up to 60°C. A built-in 1 kW heater handles this on board, so no boiler piping or separate water-heating system is required.
How much glassware can the AW47 wash per cycle?
Each cycle holds up to 450 test tubes (16.5 ml) or 36 volumetric flasks (100 ml) on the standard table stand. Optional jet and test-tube racks adapt the load to other glassware.
Is the AW47 available in both 115V and 220V?
Yes. The AW47 ships in a 115V configuration (SKU AW-47-115V) and a 220V configuration (SKU AW-47-220V). Select the voltage that matches your facility's bench circuit at checkout.
What are the external dimensions and weight of the AW47?
Packed for shipping it measures 36 × 36 × 62 in at 200 lb. Interior tub dimensions measure W420 × D450 × H570 mm.
How do I clean narrow-neck glassware in the AW47?
Use the optional jet rack for narrow-neck or narrow-body glassware. The rack fixes the rotating nozzles to direct pressurized water into hard-to-reach interiors.
What is the difference between AW-47-115V and AW-47-220V?
AW-47-115V is the 115V configuration. AW-47-220V is the 220V configuration. Order the catalog number that matches your facility's electrical supply.
What is the UNSPSC code for the Yamato AW47?
The Yamato AW47 is classified under UNSPSC 31161800 (washers).
Where is the Yamato AW47 manufactured?
Yamato Scientific lists Japan as the country of origin for the AW47.
Is there a spec sheet or brochure for the Yamato AW47?
Yes. The Yamato AW47 Glassware Washer brochure (203 KB PDF) is linked under Documents & Downloads on this page.
What are the interior dimensions of the Yamato AW47?
The Yamato AW47 chamber measures W420 × D450 × H570 mm inside (W × D × H).
