TrippNT Single Glove Box Holder with Clear Front | White PVC Top-Load Keyhole Wall Mount 50026

Technical Narrative

The TrippNT 50026 Single Glove Box Holder with Clear Front is a single-bay white ¼″ PVC and ⅛″ clear acrylic glove box holder engineered for top-loading, front-slot dispensing at the wall. The clear acrylic front panel provides full visual inventory monitoring of the glove box inside without opening or removing anything, allowing a quick glance to confirm stock level and glove type during busy lab or clinical operations. The front dispensing slot at mid-height allows single-glove pull from the box without lifting or tilting the holder. The top is open for straightforward restocking: lower the new glove box into the holder from above without removing the existing box first if partially used. Two keyhole slots on the rear panel accept standard screw hardware (included) for quick wall mounting on gypsum board, tile, or wood-paneled surfaces.

At 11⅝″ W x 5⅜″ H x 4¾″ D and 1 lb, the 50026 is the standard single-bay version of the clear-front glove box holder line, available in double (50098) and triple (50023) configurations at the same PVC/acrylic construction for multi-bay installations at clinical workstations, BSC bays, and procedure stations. Backed by TrippNT’s 100% Lifetime Guarantee.

Technical Specifications

Laboratory and Clinical Applications

The 50026 is deployed wherever a single glove box requires permanent wall-mounted presentation with clear-front inventory visibility, including BSC side-baffle or adjacent wall single-size glove staging, clinical exam room wall-mounted single-size glove position, nursing station single-bay glove holder at point of care, laboratory bench wall glove staging for a single glove category, pharmaceutical GMP cleanroom single-position glove staging, dental operatory single-bay glove holder, veterinary exam room wall-mounted single glove position, industrial QC station single glove category holder, hospital procedure room single glove size wall position, and any fixed wall position requiring a single-bay clear-front top-load glove box holder with keyhole mounting.

Product Documentation

• Sales Sheet — 50026 Single Glove Box Holder with Clear Front (PDF)

Made in the U.S.A. & Lifetime Guarantee

Proudly manufactured in the United States by TrippNT. This glove box holder is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your laboratory. Institutional pricing and bulk discounts are available for universities, hospital systems, and government agencies.

Frequently Asked Questions

How does the 50026 single clear-front holder differ from the 50304 single plain glove box dispenser — when should each be specified?

The 50026 uses a ¼″ white PVC body with a ⅛″ clear acrylic front panel, providing full visual inventory monitoring through the clear front without opening the unit. The 50304 plain dispenser uses an all-white styrene construction with no clear panel — inventory level requires opening or tilting to check. Specify the 50026 when the clear front is required for quick visual stock-level confirmation during busy lab or clinical operations and the premium clear-front construction is appropriate for the environment. Specify the 50304 when cost is the primary driver and visual monitoring through the front panel is not required.

Does the 50026 work with all standard nitrile, latex, and vinyl glove box formats, and what is the maximum glove box depth it accommodates?

The 50026 is designed to hold standard 100-count and 200-count glove boxes from all major manufacturers (Kimberly-Clark, Medline, Ansell, Cardinal Health, Halyard equivalents) in nitrile, latex, vinyl, and neoprene formats. Standard glove boxes are approximately 4½″ deep; the 50026 interior depth of 4¾″ accommodates all standard formats with a small clearance margin. Extra-deep specialty glove boxes (e.g., some extended-cuff formats exceeding 4¾″ body depth) may not drop in fully; verify your specific glove box depth against the 4¾″ holder depth before fleet purchasing.