TrippNT Large PETG Tissue Box Holder | Clear Shatterproof Vertical or Horizontal Keyhole 51140

Technical Narrative

The TrippNT 51140 Large PETG Tissue Box Holder is a clear 0.100″ shatterproof PETG open-tension wall holder designed for standard-size 100-count facial tissue boxes (Kleenex, Puffs, and equivalent large-format brands) in clinical exam rooms, laboratory workstations, and healthcare support areas where tissue boxes placed on open surfaces create clutter, get knocked over, or become contaminated from bench activities. The open tension design cradles the tissue box on four sides without a lid or enclosure, holding it securely by the tension of the PETG panels against the box sides while allowing the box's own dispensing port to remain fully accessible at the top. Can be mounted both vertically (portrait orientation, box dispensing from the top) and horizontally (landscape orientation, box dispensing from the side) using the same keyhole slots, accommodating both upright-box and lying-flat tissue box configurations. Clear PETG provides full visual stock-level monitoring from any angle.

At 5¼″ W x 9⅝″ H x 5⅜″ D and 0.8 lb, the Large holder fits standard 100-count large-format tissue boxes. The companion Small (51211) and Medium (51234) PETG tissue box holders serve smaller tissue box formats. Backed by TrippNT’s 100% Lifetime Guarantee.

Technical Specifications

Laboratory and Clinical Applications

The 51140 is deployed at clinical and laboratory positions requiring wall-mounted tissue box staging, including clinical exam room tissue box holders at patient positions, hospital bedside tissue box staging, nursing station tissue box holders adjacent to hand hygiene stations, laboratory bench tissue box staging at analytical instrument positions, pharmaceutical GMP manufacturing station tissue box holders, dental operatory tissue box wall staging, veterinary clinic exam room tissue box holders, academic research laboratory bench tissue box staging, physical therapy treatment room tissue box wall positions, ambulatory surgery center pre-op and recovery tissue staging, school and campus health center tissue holders, and any indoor position where a standard 100-count large-format facial tissue box requires permanent wall-mounted, spill-protected, visually monitored staging in clear PETG.

Product Documentation

• Sales Sheet — 51140 Large PETG Tissue Box Holder (PDF)

Made in the U.S.A. & Lifetime Guarantee

Proudly manufactured in the United States by TrippNT. This tissue box holder is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your facility. Institutional pricing and bulk discounts are available for universities, hospital systems, and government agencies.

Frequently Asked Questions

How does the open tension design hold the tissue box securely — and does the tension hold work for all tissue box brands and sizes, or only specific brands?

The open tension design uses inward-angled PETG panels on two or more sides to apply gentle consistent inward pressure against the sides of the tissue box, holding it by friction contact without straps, clips, or enclosures. Standard 100-count large-format facial tissue boxes from Kleenex, Puffs, Scotties, and equivalent private-label brands share a standardized box footprint (approximately 5″ W x 9″ H x 5″ D in portrait orientation) that the 51140 is calibrated for. Off-size specialty boxes (cube-format tissue boxes, very-large family-size boxes, or slim-profile small-count boxes) may not fit the tension holder correctly — the tension either won’t engage (too small) or the box won’t insert (too large). Always verify your institutional tissue brand’s box dimensions match the standard 100-count large-format footprint before fleet purchasing the 51140.

What is the difference between the Large 51140, Medium 51234, and Small 51211 tissue box holders — and how do I determine which size to specify for my tissue brand?

The three sizes correspond to the three standard tissue box format categories: Large (51140) fits 100-count full-size facial tissue boxes in standard portrait format (Kleenex Regular, Puffs Plus, and equivalents); Medium (51234) fits the mid-size box format (85-count and similar medium-profile brands); Small (51211) fits the compact or cube-format tissue box (50-count and flat-profile formats). To determine the correct holder: measure your tissue box at its widest, tallest, and deepest dimensions, then match to the holder specification that provides approximately 0″–⅛″ clearance on each side for the tension to engage. Contact TrippNT at 1-800-874-7768 if your tissue brand uses a non-standard box format and you are uncertain which holder size to specify.