TrippNT Large Lab Box with Magnet Mount | No-Drill Clear-View BSC PVC Supply Box 50358

Technical Narrative

The TrippNT 50358 Large Lab Box with Magnet Mount is a no-drill, instant-attach enclosed supply storage box engineered for ferrous steel surfaces — biosafety cabinet (BSC) side baffles, instrument cart uprights, stainless steel panels, and lab furniture steel column faces — where drilling would void equipment warranties, breach validated surface integrity, or simply slow down point-of-use supply staging. A white ¼″ PVC frame with clear ⅛″ acrylic sides and a rare-earth magnet backing forms the enclosure: the clear acrylic sides allow full visual inventory monitoring from both sides without opening the box, while the PVC frame and hinged lid protect contents from bench-level contamination, aerosolized disinfectants, and accidental spills. At 9⅛″ W x 9⅛″ H x 6½″ D, the large compartment accommodates glove boxes, stacked tip boxes, tube racks, wiper packs, or multi-item supply kits that the smaller lab boxes in this family cannot hold.

Weight is 1.22 lb, providing a low-profile mounting footprint that does not over-stress BSC baffle panel magnets. Ships fully assembled. Backed by TrippNT’s 100% Lifetime Guarantee. The same enclosure is available in keyhole wall-mount configuration for non-ferrous installation surfaces. MRI UNSAFE: the rare-earth magnet backing presents a projectile hazard in MRI Zone III and Zone IV environments. Do not use in or adjacent to MRI suites.

Technical Specifications

Laboratory and Clinical Applications

The 50358 is deployed across regulated and research environments requiring enclosed no-drill supply staging on ferrous steel surfaces, including BSC side-baffle supply kits (gloves, KimWipes, tips), instrument cart steel upright supply boxes, pharmaceutical GMP manufacturing corridor steel wall supply points, cleanroom equipment enclosure side-panel supply staging, stainless steel lab furniture column supply boxes, food-and-beverage GMP steel processing station supply kits, semiconductor fab equipment enclosure supply staging, hospital supply cart steel-panel storage, veterinary clinic stainless steel treatment table supply boxes, industrial quality-control cart supply boxes, and any application where a closed, visually transparent, dust-protected supply enclosure must be repositioned quickly without tools as bench configurations change.

Product Documentation

• Sales Sheet — 50358 Large Lab Box with Magnet Mount (PDF)

Made in the U.S.A. & Lifetime Guarantee

Proudly manufactured in the United States by TrippNT. This lab box is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your laboratory. Institutional pricing and bulk discounts are available for universities, hospital systems, and government agencies.

Frequently Asked Questions

How does the Large 50358 compare to the smaller lab boxes in the magnet-mount family — and when is the larger compartment needed?

The 50358 (9⅛″ W x 9⅛″ H x 6½″ D) is the largest single-compartment lab box in the magnet-mount family, providing approximately three times the interior volume of the small version. Specify the 50358 when the contents include full-size nitrile glove boxes (standard 10¾″ W glove boxes fit lengthwise), full-stack tip box sets, wiper packs, or multi-item supply kits that require a deeper 6½″ D interior. Specify the smaller version when the contents are compact-format supplies (small tubes, vials, gauze packs) that do not require the larger footprint. The visual management advantage of clear acrylic sides is consistent across all sizes in the family.

What is the holding force of the rare-earth magnet, and will it stay attached to a BSC side baffle during typical use vibration and door opening?

The rare-earth magnet backing provides sufficient holding force on standard 18-gauge or heavier cold-rolled steel and stainless-steel BSC side baffles to maintain attachment through normal laboratory activities including adjacent centrifuge vibration, proximate door opening, and incidental contact during work inside the BSC. For installations on lighter-gauge panel steel (below 16 gauge) or on panels with non-ferrous coating layers that reduce magnetic coupling, test holding force with the box loaded to its working weight before committing to a production deployment. Do not use on aluminum, polypropylene, or fiberglass panels where the magnet has no ferrous substrate.