TrippNT Vertical Glove Box & Kimwipe Holder Magnet Mount | 2-in-1 Fume Hood Supply Station 50481

Technical Narrative

The TrippNT 50481 Vertical Glove Box and Kimwipe Holder with Magnet Mount solves the two-unit mounting problem at fume hood side panels and biosafety cabinet exteriors: when both a glove box and a Kimwipe dispenser are required at the same position, facilities are forced to either install two separate magnetic holders — two mounting contacts, two wall footprints, two units to clean — or go without one of the two supplies. The 50481 eliminates that tradeoff with a single 5¾ × 31¼ × 4½″ (W × H × D) vertical unit that stacks a front-dispensing glove box position over a rectangular tension-grip wiper position, both sharing one magnetic backing, one mounting point, and one 2.5 lb unit to manage and decontaminate.

Constructed from ¼″ white PVC with an integrated magnetic backing, the 50481 adheres to any ferrous metal surface — fume hood sashes, BSC exterior housings, steel cart side rails, steel casework doors — and repositions tool-free without screw penetration or surface damage. The wiper section is compatible with Kimwipes Kimberly-Clark XL Wipers Part No. 34155, Accuwipe Part No. 29712, and Shur Wipe Wipers Part No. 29712. The glove box section accepts standard glove boxes in XS through XL. The 31¼″ height accommodates both sections vertically in the side panel space that is typically available alongside a full-height fume hood sash or BSC door. IPA- and bleach-compatible PVC construction satisfies USP <797>/<800> and GLP decontamination requirements. Ships fully assembled.

Technical Specifications

Laboratory and Clinical Applications

The TrippNT 50481 is specified wherever a single magnetic mounting point must simultaneously stage both gloves and wipers, including fume hood side panels requiring co-located glove and wiper access for analytical and organic chemistry work, biosafety cabinet exterior housings in BSL-2 laboratories where both supplies are consumed at every session, sterile compounding anteroom BSC positions operating under USP <797>/<800>, steel lab cart side rails in mobile procedure carts requiring combined glove and wiper staging, hospital procedure cart side panels for combined supply access, cleanroom gowning anteroom positions where both supplies are dispensed at the same station, dental operatory metal cabinet positions, veterinary clinic stainless steel exam area combined supply stations, and any position where real estate constraints make two separate magnetic holders operationally impractical and a single combination unit is the correct specification.

Product Documentation

• Sales Sheet — TrippNT 50481 Glove Box & Wipe Holder with Magnet Mount (PDF)

Made in the U.S.A. & Lifetime Guarantee

Proudly manufactured in the United States by TrippNT. This combination holder is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your laboratory. Institutional pricing and bulk discounts are available for universities, hospital systems, and government agencies.

Frequently Asked Questions

What is the clearance required to mount the 50481 on a fume hood side panel, and does the 31¼″ height fit standard fume hood sash heights?

The 50481 requires 31¼″ of continuous vertical ferrous metal surface for full mounting. Standard fume hood side panels on 4-foot and 6-foot hoods typically provide 28–36″ of usable side panel height depending on the model — the 50481 fits within this range on most major hood lines. For BSC exteriors, the side panel height is typically 24–30″; on units at the lower end of this range, mounting the 50481 may require positioning it slightly above the base of the side panel to stay within the ferrous surface area. Verify the available continuous metal surface height on your specific hood or BSC model before ordering. The magnetic backing mounts and repositions tool-free, so fit adjustments require no additional hardware.

What is the institutional pricing structure for volume orders of the TrippNT 50481?

LabSupplies.com provides tiered institutional pricing for universities, hospital systems, federal agencies, and government laboratories. Volume discounts apply at checkout by quantity. For facilities specifying the 50481 alongside separate glove-only (side-loading series) or wiper-only (50282) magnetic holders as part of a comprehensive fume hood and BSC supply standardization program, our B2B team can assist with multi-SKU quantity planning and coordinated pricing.