TrippNT 2-in-1 Large Acrylic Apparel Dispenser | Hairnet Bootie Gown PPE Dispenser 50101

TrippNT 2-in-1 Large Acrylic Apparel Dispenser — Dust-Protected Dual-Compartment Wall-Mount Dispenser for Hairnets, Booties, Gowns, and Cleanroom PPE

The TrippNT 2-in-1 Large Acrylic Apparel Dispenser (SKU 50101) is a high-capacity, dust-protected wall-mount dispenser engineered for controlled environments and compliance-driven workplaces where single-use protective apparel must be staged at point-of-entry in conditions that prevent external contamination of the apparel itself before use. At 20″ W × 18⅜″ H × 9″ D with two equal large compartments, the 50101 provides approximately 9½″ of usable width per compartment — sufficient for hairnets, booties/shoe covers, beard covers, finger cots, disposable gowns, and coveralls staged as individual dispense units or small folded stacks. The hinged top lid allows top-loading without removing the dispenser from the wall; the bottom dispensing slot ensures FIFO (first-in, first-out) apparel rotation that prevents bottom-stack items from aging in place. The white PVC and clear 3/16-inch acrylic construction provides all-sides transparency for at-a-glance inventory checks during gowning room rounds, without opening the dispenser and creating a contamination event.

The keyhole back panel with included mounting hardware supports installation on painted drywall, stainless steel cleanroom panels, FRP (fiber reinforced plastic) gowning room wall board, and painted block wall — the primary surface types in pharmaceutical manufacturing, food processing, and hospital gowning areas. Once mounted, the dispenser weight-loads to the keyholes and can be lifted off for periodic sanitization with IPA or quaternary ammonium compounds compatible with PVC and acrylic surfaces. For facilities needing a third apparel category staged at the same wall position (e.g., hairnet + beard cover + bootie), the sibling 50127 3-in-1 (RAYNEU session scope) is the correct specification. Ships fully assembled.

Technical Specifications

Laboratory and Clinical Applications

The TrippNT 50101 is specified for apparel dispensing in: pharmaceutical manufacturing gowning rooms (21 CFR Part 211, EU GMP Annex 1, ISO 14644 compliance staging), USP <797> and <800> sterile compounding ante-rooms (hairnet and gown staging), food and beverage production gowning areas (HACCP and FSMA compliance), medical device manufacturing cleanrooms (ISO 5–8 gowning vestibules), hospital surgical suite gowning corridors (hairnet, beard cover, and bootie pre-staging), laboratory entry vestibules (visitor PPE staging for BSL-2 and BSL-3 areas), dental lab and dental operatory gowning points, contract research organization (CRO) and biotech entry compliance staging, USDA-inspected meat and poultry production lines, semiconductor fab cleanroom gowning areas, and school laboratory safety PPE dispensing points. The 50101 is also widely specified for visitor management programs where two categories of entry PPE must be provided (e.g., hairnet + shoe cover) from a single wall-mounted station.

Product Documentation

• Sales Sheet — 50101 2-in-1 Large Acrylic Apparel Dispenser (PDF)

Made in the U.S.A. & Lifetime Guarantee

Proudly manufactured in the United States by TrippNT. This apparel dispenser is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your laboratory. Institutional pricing and bulk discounts are available for universities, hospital systems, and government agencies.

Frequently Asked Questions

How does the hinged lid design prevent PPE contamination compared to open-top dispensers?

Open-top apparel dispensers expose the top layer of staged apparel to airborne particulates, HVAC supply air carrying viable and non-viable particles, and physical contamination from people leaning over or reaching across the staging area. The 50101’s hinged lid creates a sealed dust barrier over the apparel stack when closed; the lid only opens during top-loading refill events and then re-seals automatically. In pharmaceutical GMP environments, this reduces the risk of apparel contamination from open exposure — a documented cGMP observation category during FDA and EU inspections of gowning areas. The bottom dispensing slot provides a one-at-a-time controlled release without requiring users to open the lid or reach into the dispenser, further limiting the exposure window.

Can this dispenser hold both hairnets and booties in the same unit?

Yes — that is the most common configuration. Each of the two compartments is independently sized to hold a standard hairnet dispenser bag (500-count, approximately 8″ wide × 6″ tall as packaged) or a bootie/shoe cover stack (typically 100-pair folded, approximately 8″ wide × 5″ tall). The 50101 is ordered most frequently to stage one apparel category per compartment: hairnet (left bay) + bootie or shoe cover (right bay) at gowning room entry. For facilities needing a third category, the 50127 3-in-1 is the correct upgrade.