Global Industrial Portable Eyewash Station Features
Designed for chemical hazard locations without a continuous water supply, the Global Industrial 708606 is a self-contained 9-gallon gravity-fed portable eyewash station that meets ANSI Z358.1-2014 without any plumbing connection. Pulling the activation tray starts water flow at 0.4 gallons per minute, delivering the full 15-minute ANSI-required flush from the stored tank. Wall mounting via the included bracket places nozzles at the ANSI-required 33 to 45 inches from floor. Tabletop or shelf placement on any surface rated for approximately 100 pounds is also supported.
At 8.1 pounds empty, the 708606 relocates as work zones change, fills at any potable water source, and re-hangs on the bracket without tools. A wide-fill cap supports easy draining and refilling. Bracket mounting hardware is not included — use fasteners rated for 150-pound vertical load minimum. Backed by a 1-year limited warranty from Global Industrial.
Technical Specifications
| Specification | Detail |
|---|---|
| Manufacturer | Global Industrial |
| Item # | 708606 |
| Type | Portable, self-contained gravity fed |
| Capacity | 9 gallons |
| Flow Rate | 0.4 GPM (1.5 L/min) minimum for 15 minutes |
| Run Time | 15 minutes minimum (full tank) |
| Activation | Pull-tray downward for continuous water flow |
| Plumbing Required | None — self-contained unit |
| Weight | 8.1 lbs (empty) / approximately 98 lbs (filled) |
| Mounting | Wall-mounted via included bracket — or tabletop/shelf |
| Hardware | Bracket included — mounting hardware NOT included |
| Fill Opening | Wide-fill cap for easy refilling and inspection |
| Color | Safety yellow |
| Compliance | ANSI Z358.1-2014 |
| Inspection | Visual check recommended weekly; full drain and refill monthly minimum |
| Warranty | 1-year limited |
Applications
To provide ANSI-compliant eyewash coverage at locations without plumbing, the Global Industrial 708606 is deployed at temporary construction and renovation sites, remote outdoor work areas, secondary chemical handling areas within larger facilities, locations undergoing renovation where plumbing is temporarily unavailable, and field service vehicles and mobile work units.
Portable Gravity Fed vs. Plumbed Eyewash
| Feature | Portable Gravity Fed (708606) | Plumbed Pedestal / Wall Mount |
|---|---|---|
| Plumbing | None required — fully self-contained | Requires connection to water supply |
| Installation | Mount bracket, hang unit, fill with water | Plumber required for connection |
| Locations | Remote, temporary, or no-plumbing areas | Permanent plumbed locations only |
| Water Supply | 9-gallon stored tank — manual refill | Continuous supply — no refill needed |
| Run Time | 15 min from stored 9-gallon tank | Unlimited while supply connected |
| Weight (filled) | ~98 lbs — wall or shelf mounting | Varies by unit |
| Maintenance | Weekly visual check; monthly drain and refill | Weekly activation flush |
| Price | $229 | $305–$349 |
Academic and Institutional Pricing
LabSupplies.com offers tiered quantity pricing for academic and research institutions. As an authorized dealer, we ship directly from USA inventory.
Frequently Asked Questions
When is a portable gravity-fed eyewash appropriate instead of a plumbed unit?
A portable gravity-fed eyewash suits locations without a continuous potable water supply: temporary construction sites, remote outdoor work areas, facilities being renovated, secondary or low-traffic chemical areas not justifying a permanent installation, and field service vehicles. ANSI Z358.1-2014 explicitly addresses portable self-contained units and sets the same flow rate and 15-minute duration requirements as plumbed units, making a properly maintained portable unit compliant where plumbing is unavailable.
Does the 9-gallon tank provide the full 15-minute ANSI-required flush?
Yes. At the ANSI minimum flow rate of 0.4 gallons per minute, a full 9-gallon tank delivers exactly 15 minutes of continuous flushing — the minimum duration specified by ANSI Z358.1-2014. This assumes the tank is completely full at activation. Partial fill results in proportionally shorter flush duration, which is why the ANSI standard requires frequent visual inspection to verify fluid level and confirm readiness. The tank must always be filled to the fill line.
How often does the 708606 portable eyewash tank need to be maintained?
ANSI Z358.1-2014 requires frequent visual inspection to verify fluid level and unit operation. At minimum, Global Industrial recommends weekly visual checks and monthly full drain, flush, and refill with clean potable water. In high-heat or biologically active environments, more frequent changes are required. A bacteriostatic preservative can extend the change interval when added per the preservative manufacturer's instructions. The wide-fill cap supports easy drainage and refilling without removing the unit from the bracket.
Can the 708606 be placed on a shelf or table instead of wall-mounted?
Yes. Any stable surface rated for approximately 100 pounds when filled supports the 708606, in addition to wall mounting. For wall mounting, fix the bracket top between 58-3/8 and 70-3/8 inches from the floor so eyewash nozzles meet the ANSI height requirement of 33 to 45 inches. Mounting hardware is not included — use fasteners rated for a minimum 150-pound vertical load. Tabletop or shelf positioning offers flexibility to relocate as work zones change.
Global Industrial Emergency Eyewash Family
For locations with plumbing access, Global Industrial plumbed eyewash stations are available at LabSupplies.com in pedestal (708382) and wall-mounted (708381) configurations. For simultaneous full-body decontamination and eye flushing capability, the emergency combination shower with eyewash (708383) provides both functions from a single floor-mounted plumbed unit. All four models meet ANSI Z358.1-2014.