Alpha Resources CEMBLES® – Pre-Assembled XRF Sample Cups - Fill, Snap and Test is an X-ray fluorescence (XRF) sample cup for holding powders, liquids, pellets, and slurries during XRF analysis. Used with a thin-film sample support (XRF film such as Mylar or polypropylene), it presents a flat, reproducible sample surface to the spectrometer for consistent, accurate EDXRF and WDXRF measurements.
An aftermarket laboratory consumable supplied by Alpha Resources.
Specifications
| Alpha Part Number | ARX3023 |
| Unit of Measure | 32 |
| Cup Size | 40mm |
| Film Type | Membrix RF 3.0u (0.12mil) |
Same series
Other CEMBLES cup sizes and films: ARX3000 (32mm, Mylar 3.0 (0.12 mil)), ARX3001 (32mm, Mylar 3.5 (0.14 mil)), ARX3002 (32mm, Mylar 6.0 (0.24 mil)), ARX3003 (32mm, Polypropylene 4.0 (0.16 mil)), ARX3004 (32mm, Polypropylene 6.0 (0.24mil)), ARX3011 (35mm, Membrix RF 3.0 (0.12 mil)), ARX3006 (35mm, Mylar 3.0 (0.12 mil)), ARX3007 (35mm, Mylar 3.5 (0.14 mil)), ARX3008 (35mm, Mylar 6.0 (0.24 mil)), ARX3009 (35mm, Polypropylene 4.0 (0.16mil)), ARX3010 (35mm, Polypropylene 6.0 (0.24mil)), ARX3017 (40mm, Membrix RF 3.0u (0.12mil)), ARX3012 (40mm, Mylar 3.0 (0.12 mil)), ARX3018 (40mm, Mylar 3.0 (0.12 mil)), ARX3013 (40mm, Mylar 3.5 (0.14 mil)), ARX3019 (40mm, Mylar 3.5 (0.14 mil)), ARX3014 (40mm, Mylar 6.0 (0.24 mil)), ARX3020 (40mm, Mylar 6.0 (0.24 mil)), ARX3015 (40mm, Polypropylene 4.0 (0.16mil)), ARX3021 (40mm, Polypropylene 4.0 (0.16mil)), ARX3016 (40mm, Polypropylene 6.0 (0.24mil)), ARX3022 (40mm, Polypropylene 6.0 (0.24mil)), ARX3029 (45mm, Membrix RF 3.0u (0.12mil)), ARX3024 (45mm, Mylar 3.0 (0.12 mil)).
Documents
