TrippNT Triple Glove Box Holder with Clear Acrylic Front and Magnet Mount | No-Drill 50558

Technical Narrative

The TrippNT 50558 Triple Glove Box Holder with Clear Acrylic Front and Magnet Mount combines three differentiating features in a single glove box staging unit: three stacked glove box positions, a clear ⅛″ acrylic front panel for full inventory visibility without opening or moving the holder, and rare-earth magnet backing for no-drill, tool-free attachment to any ferrous steel surface. This three-way combination addresses the most common compound specification from laboratory and clinical environments — “we need to see all three box stock levels at a glance and can’t drill into our BSC baffle” — in a single unit that does not require wall anchors, permits repositioning in seconds, and meets visual management requirements for 5S lean programs that require inventory level to be visible without physical interaction.

The clear acrylic front panel presents the glove box face and the box’s own label through the panel, allowing brand, size, and type identification at a glance. A mid-panel dispensing slot allows single-glove pulls without opening or removing the acrylic panel. Top-loading for box replacement is accomplished by lifting out the acrylic front panel. External dimensions are 11⅝″ W x 15⅜″ H x 5″ D, weight 2.27 lb. Ships fully assembled. Backed by TrippNT’s 100% Lifetime Guarantee. MRI UNSAFE: the rare-earth magnet backing presents a projectile hazard in MRI Zone III and Zone IV environments.

Technical Specifications

Laboratory and Clinical Applications

The 50558 is deployed across regulated and research environments requiring three-position enclosed visible glove box staging on ferrous steel surfaces, including BSC side-baffle three-size glove staging, instrument cart steel upright three-size PPE staging, stainless steel lab furniture glove management, pharmaceutical GMP corridor stainless steel PPE stations, hospital and clinical procedure room ferrous steel wall PPE stations, ED and ICU cart steel upright glove staging, dental operatory metal cabinetry glove staging, veterinary clinic stainless table glove management, cleanroom anteroom gowning steel panel PPE staging, food-and-beverage GMP stainless steel wall three-size PPE points, forensic lab stainless steel bench edge glove storage, and any installation where no-drill three-size glove staging with visual stock monitoring is required on a ferrous steel surface.

Product Documentation

• Sales Sheet — 50558 Triple Glove Box Holder Clear Front & Magnets (PDF)

Made in the U.S.A. & Lifetime Guarantee

Proudly manufactured in the United States by TrippNT. This glove box holder is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your laboratory. Institutional pricing and bulk discounts are available for universities, hospital systems, and government agencies.

Frequently Asked Questions

How does the 50558 (clear front + magnet) compare to the keyhole-wall-mount triple glove box holders — when does the combined clear-front and magnet specification justify the premium?

The 50558 packages two upgrades over a basic open-front keyhole-mount triple holder: (1) the clear acrylic front panel provides enclosed dust protection and visual monitoring without the user needing to physically check stock level; (2) the magnet backing eliminates the need for keyhole hardware and permits repositioning without wall damage. Justify the 50558 when both are needed simultaneously — ferrous steel installation surface and a visual management standard requiring stock levels visible without opening the holder. If only one is needed — clear front but keyhole wall, or magnet but open front — specify the appropriate single-upgrade variant from the same product family.

How is a glove box replaced in the 50558 — does the clear acrylic front panel need to be fully removed every time?

Yes, glove box replacement is a top-load operation: the clear acrylic front panel lifts out of its channel in the PVC body, the depleted glove box is removed from the appropriate bay, a new box is dropped in from the top, and the acrylic panel is replaced by sliding it back into the channel. This takes approximately 15–20 seconds per box and requires no tools. During active single-glove dispensing, the mid-panel dispensing slot provides access without removing the acrylic panel. The panel does not hinge — it lifts fully out — which means it should be set on a stable surface during box replacement to avoid dropping.