TrippNT Height Adjustable Double-Sided Medical Suture Stand | 48-Box 6-Shelf Pneumatic 53944

Technical Narrative

The TrippNT 53944 Height Adjustable Double-Sided Medical Suture Stand Companion Cart is a pneumatic-height-adjustable mobile suture storage station engineered for OR suites, procedure rooms, and sterile supply corridors that need both a complete suture presentation solution — slanted shelves, 48-box capacity, both sides accessible — and the ability to quickly raise or lower the unit from seated-access height to standing-access height without tools or manual adjustment effort. Three slanted shelves per side (six total) present suture boxes at a forward-facing angle for label-forward identification and single-hand retrieval. The pneumatic gas-cylinder column adjusts from 29¼″ to 42½″ height with a simple press-and-hold lever, enabling the same cart to serve a circulating nurse at standing height (42½″) and a seated scrub tech or supply technician at table height (29¼″) without reconfiguring the unit. Four 3-inch non-marking rubber casters (2 locking) allow the 22 lb unit to be repositioned by a single operator between OR rooms, sterile supply areas, and case cart staging positions.

At 24″ W x 61½″ H (max) x 19½″ D and 22 lb, the stand ships LTL fully assembled. ¼″ white PVC shelves on ½″ white HDPE frame. Backed by TrippNT’s 100% Lifetime Guarantee.

Technical Specifications

Laboratory and Clinical Applications

The 53944 is deployed in surgical and procedure room environments requiring height-adjustable double-sided mobile suture staging, including OR suite central suture carts serving multiple OR team members simultaneously from both cart sides, sterile processing department suture pick and pack stations where the operator alternates between standing and sitting during high-volume case preparation, circulating nurse primary suture cart with height adjustment between room setup and case active phases, procedure room suture and soft-goods carts requiring operator ergonomic adjustment, ambulatory surgery center multi-case suture staging carts, cardiac surgery suite suture stand positioned between two operative fields, orthopedic OR suite high-volume suture staging for arthroplasty case setups, hospital central supply suture dispensing station, trauma bay suture staging cart with height adjustment for mixed standing and seated use, veterinary large-animal surgical suite suture staging, and any OR or procedure environment where a single mobile suture stand must serve operators at different heights and be accessible from both sides simultaneously.

Product Documentation

• Sales Sheet — Height Adjustable Suture Stand 53944 (PDF)

Made in the U.S.A. & Lifetime Guarantee

Proudly manufactured in the United States by TrippNT. This suture stand is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your facility. Contact TrippNT at 1-800-874-7768 for institutional pricing and fleet programs.

Frequently Asked Questions

How does the pneumatic height adjustment work in practice during an active OR case, and how quickly can the height be changed?

The pneumatic gas cylinder operates identically to the mechanism in a height-adjustable office chair: the operator reaches under the cart top frame, presses and holds the release lever, and applies downward body weight to lower the stand or lifts slightly to allow the spring-loaded cylinder to raise it. Releasing the lever locks the height at the new position. Height change from 29¼″ to 42½″ takes approximately 3–5 seconds of lever engagement. No tools are required and the adjustment can be made one-handed while the other hand steadies the cart. For sterile environments where contact with the adjustment lever requires re-glove, note that the lever is on the cart column below the work zone; establish your facility’s sterile technique protocol for height adjustment before deploying in an active sterile field.

How does the double-sided 53944 compare to the single-sided Core CL Cart (53592) for suture staging — when does each design serve better?

The Core CL Cart (53592) has 6 angled shelves on one side only, is 27½″ wide with 3 locking drawers and enclosed bulk storage, and is best when the suture staging position is against a wall or in a corridor where only one-sided access is needed and locked drawer storage for controlled items is required. The 53944 double-sided stand has 6 shelves (3 per side), no drawer storage, is 24″ wide, and is best when the cart is positioned freestanding in an open OR or procedure room where two operators access sutures from opposite sides simultaneously, or when a compact lightweight stand without drawer storage is preferred. The 53944’s pneumatic height adjustment is its unique advantage over both the Core CL Cart and any fixed-height suture cart.