Collection: Guardian Fall Protection

Guardian Fall Protection Harnesses, Anchors & Complete Fall Arrest Systems

Guardian Fall Protection builds full body harnesses, anchorage connectors, self-retracting lifelines and guardrail systems tested to ANSI Z359 and referenced against OSHA 1910.140/1926.502, stocked here from Full Body Harnesses through Ladder Safety Systems with the part number, standard and UPC published on every listing. Guardian also manufactures a separate Foreign Material Exclusion (FME) line — pipe covers, threaded plugs and exclusion-zone tape for keeping tools and debris out of open equipment during a maintenance turnaround.

Fall protection systems Foreign material exclusion

Free US shipping on orders over $100 · Ships from USA inventory

Fall Protection Complete Your System FME & Dropped Objects FAQs

Fall Protection

Full Body Harnesses, Anchors, SRLs & Guardrail Systems

The core Guardian catalog: full body harnesses tested to ANSI Z359.11, anchorage connectors to Z359.18, and self-retracting lifelines to Z359.14 — each referenced against OSHA 1910.140 and 1926.502, with the standard, weight capacity and UPC stated on every product page.

Full Body Harnesses

Anchorage Connectors

Self-Retracting Lifelines

Lanyards

Guardrails

Ladder Safety Systems

Complete Your System

Lifelines, Rescue Gear & Site Fall Protection

Beyond the core harness-anchor-lifeline system: vertical and horizontal lifelines for ladders and long runs, confined space and rescue equipment, warning line systems, and the kits and scaffolding hardware that round out a jobsite fall protection plan.

Vertical Lifelines

Horizontal Lifelines

Guardian confined space and rescue equipment

Confined Space & Rescue

Fall Protection Kits

Warning Line Systems

Scaffolding Equipment

Foreign Material Exclusion

FME Pipe Covers, Plugs & Dropped Object Prevention

A separate Guardian product line for a different hazard: keeping tools, fasteners and debris out of open pipes, turbines and vessels during a maintenance turnaround. Pipe covers, threaded plugs, exclusion-zone tape and dropped-object tethers, sized and packed as Guardian ships them.

FME Pipe Covers

FME Plugs & Seals

Dropped Object Tethers

Debris Netting

FME Zone Marking

FME Caps

Why Buy Here

Standardizing Guardian Fall Protection Across a Site

OSHA & ANSI standards on every listing

The exact standard — Z359.11 for harnesses, Z359.18 for anchors, Z359.14 for SRLs — and its OSHA reference is stated on the product page, not buried in a datasheet.

Ships from USA inventory

Stocked through US industrial distribution, so common harness sizes and anchor models ship without a factory lead time.

Complete systems, not just parts

Harnesses, anchors, lanyards and SRLs are stocked together, so a full fall-arrest system can be sourced from one supplier instead of three.

Free shipping over $100

Orders over $100 ship free within the continental United States.

Questions

Guardian Fall Protection — Specification and Ordering FAQs

How do I put together a complete fall arrest system?

A basic system needs three things: an anchorage connector rated for your structure, a full body harness, and a connecting device — either a shock-absorbing lanyard for a fixed-length tie-off or a self-retracting lifeline (SRL) for work that requires movement. Guardian's harnesses, anchors and SRLs are built to connect to each other, and each product page states the OSHA section and ANSI standard it's tested against.

What's the difference between a lanyard and a self-retracting lifeline (SRL)?

A shock-absorbing lanyard is a fixed-length connector rated under ANSI Z359.13 — it limits fall distance to its own length plus the shock absorber's deployment. An SRL pays out and retracts as the worker moves and is rated under ANSI Z359.14, arresting a fall in a much shorter distance — which matters when there isn't enough clearance below the work area for a lanyard's full fall path.

Are Guardian harnesses and anchors OSHA compliant?

Guardian's full body harnesses are tested to ANSI Z359.11 and referenced against OSHA 1910.140/1926.502; anchorage connectors are tested to ANSI Z359.18 under the same OSHA sections. The exact standard and revision year is stated on every product page — check it against your site's fall protection plan before ordering, since ANSI revisions do change requirements.

What is Foreign Material Exclusion (FME), and why is it on a fall protection site?

FME is a separate Guardian product line for a different problem: keeping tools, fasteners and debris from falling into an open pipe, turbine or vessel during maintenance — common in power generation, aerospace and industrial turnarounds. Pipe covers, threaded plugs, tethers and exclusion-zone tape are stocked alongside the fall protection catalog because Guardian manufactures both.

Can I order Guardian products by the case, or only as single units?

Both — where Guardian packs an item in a box or case (nylon pipe covers, threaded plugs, FME tape), that pack size is stated on the product page. Harnesses, anchors, SRLs and most fall-arrest hardware ship as single units.

How do I find a specific Guardian part number?

Use the category sections above to narrow to the right product type, then open the listing — every product page states the Guardian part number, ORS item number and UPC directly, so you can match it against a spec sheet or an existing PO.

Are these genuine Guardian products?

Yes. LabSupplies is an authorized Guardian Fall Protection dealer, and every item is genuine Guardian stock in original manufacturer packaging — nothing repackaged or relabeled.

I need a size or model that isn't listed.

Guardian's catalog runs well beyond what's stocked here — if you can't find a part number, send it through the contact form and we'll source it.

The complete Guardian Fall Protection range is organized by category above. Every product page states its Guardian part number, UPC, standards compliance and weight capacity, so you can match a spec sheet line by line before ordering.

Guardian Fall Protection® is a trademark of Guardian Fall Protection. LabSupplies.com is an authorized dealer and is not otherwise affiliated with Guardian Fall Protection. OSHA and ANSI references, weight capacities and country-of-origin data are supplied by the manufacturer. Standards compliance describes performance in a standardized test — verify current fall protection plan requirements before selecting equipment.

Full Range