TrippNT Double Side Loading Glove Box Holder | 3/16" Clear Acrylic 2-Position Keyhole Glove Holder 50830

Technical Narrative

The TrippNT 50830 Double Side Loading Glove Box Holder introduces a fundamentally different refill mechanic to the glove box holder category: instead of lifting a box over a top edge or pulling it out from the front, the technician simply slides a new box in from the open side — a one-motion, one-hand action that does not require breaking the holder from the wall, reaching overhead, or repositioning. In high-traffic clinical and laboratory environments where glove boxes are replaced multiple times per shift, this side-loading advantage compounds over hundreds of refills per month into measurable time savings and reduced frustration. The two positions in the 50830 accommodate two glove sizes simultaneously — most commonly S/M and L/XL — in a 10⅛ × 10⅞ × 4⅜″ (W × H × D) footprint from a single keyhole wall mount.

Constructed from 3⁄16″ clear acrylic — thicker than the standard ⅛″ used in most glove holders — the 50830 provides enhanced impact resistance in busy shared-station environments where incidental contact from rolling carts, equipment moves, and frequent refilling is a routine reality. The full clear acrylic body provides 360° stock visibility without interaction; front-dispensing slots allow single-glove pull at each position independently. Hardware is included for keyhole wall installation. At 2.4 lb, the 50830 ships fully assembled. For three-size stations, the 50826 triple provides the same 3⁄16″ clear acrylic side-load design; for four-size stations, the 50850 quad; for single-size positions, the 50831 — all on the same construction standard and Lifetime Guarantee program.

Technical Specifications

Laboratory and Clinical Applications

The TrippNT 50830 is specified for two-size glove staging where rapid side-load refill is an operational priority, including high-traffic hospital exam room and procedure room wall glove stations with high box turnover, emergency department and urgent care room glove positions requiring the fastest possible box replacement, BSL-2 shared laboratory bench glove stations with multiple users per shift, pharmaceutical GMP clean room dual-glove-size staging positions, ambulatory surgery center (ASC) high-turnover dual-size glove stations, dental clinic exam operatory two-size glove dispensers, veterinary clinic high-traffic dual-size examination room glove stations, industrial QC and manufacturing clean room two-size glove access points, academic core facility shared bench dual-size glove stations, and any shared-station environment where side-load refill speed and 3/16-inch acrylic impact resistance are higher priorities than magnet repositionability.

Product Documentation

• Sales Sheet — TrippNT 50830 Double Side Loading Glove Box Holder (PDF)

Made in the U.S.A. & Lifetime Guarantee

Proudly manufactured in the United States by TrippNT. This glove box holder is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your laboratory. Institutional pricing and bulk discounts are available for universities, hospital systems, and government agencies.

Frequently Asked Questions

How does the side-loading design of the 50830 differ from top-loading glove holders, and when is side-loading the better specification?

In a top-loading holder, replacing a glove box requires lifting the empty box over the top rail and lowering the new box in — a two-hand action that is difficult in tight wall spaces, near overhead obstructions, or when the holder is mounted above shoulder height. The 50830’s open side allows the new box to be slid in from the side with one hand in a single motion — no lifting, no overhead reach. Side-loading is the better specification for high-frequency refill environments, wall-mounted positions above shoulder height, and stations where the adjacent wall, cabinet, or equipment constrains overhead access. Top-loading is preferred for positions where a fully enclosed protective front is a higher priority than refill speed.

What is the institutional pricing structure for the 50830, and are the single, triple, and quad side-loading holders on the same program?

LabSupplies.com provides tiered institutional pricing for universities, hospital systems, federal agencies, and government laboratories. Volume discounts apply at checkout by quantity. The 50831 single, 50830 double, 50826 triple, and 50850 quad keyhole side-loading holders are all on the same institutional pricing program. The magnet-mount equivalents (50950–50953) are also available on the same program for positions requiring tool-free repositioning.