{"product_id":"trippnt-small-petg-tissue-box-holder-51211","title":"TrippNT Small PETG Tissue Box Holder | Clear Shatterproof Vertical or Horizontal Keyhole 51211","description":"\u003ch2\u003eTechnical Narrative\u003c\/h2\u003e\n\u003cp\u003eThe TrippNT 51211 Small PETG Tissue Box Holder is a clear 0.100″ shatterproof PETG open-tension wall holder for standard facial tissue boxes, in the small-depth configuration at 2⅝″ depth — the smallest of the three-size clear PETG tissue box holder family. The open tension design cradles the tissue box on four sides using inward-angled PETG panels that apply gentle consistent friction to hold the box securely without straps, clips, or enclosures, while leaving the box’s own dispensing port fully accessible. Both vertical (portrait) and horizontal (landscape) orientations are supported via dual keyhole slots on the rear panel, accommodating both upright and sideways tissue box configurations at the same wall position. Clear PETG provides full visual stock monitoring from any angle without opening any panel.\u003c\/p\u003e\n\u003cp\u003eAt 5¼″ W x 9⅝″ H x 2⅝″ D and 0.48 lb, the 51211 is designed for tissue boxes with a depth (front-to-back dimension) of approximately 2⅝″. The complete family — Small 51211 (2.625″), Medium 51234 (3.875″), and Large 51140 (5.375″) — allows the correct depth to be matched to any standard tissue box format. Backed by TrippNT’s 100% Lifetime Guarantee.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e0.100″ Shatterproof Clear PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\/Finish\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eSmall (2⅝″ depth)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign\u003c\/td\u003e\n\u003ctd\u003eOpen tension (no lid) — four-panel tension cradle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Orientation\u003c\/td\u003e\n\u003ctd\u003eVertical (portrait) or horizontal (landscape) — dual keyhole slots\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Type\u003c\/td\u003e\n\u003ctd\u003eKeyhole wall mount (hardware included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Dimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e5¼″ x 9⅝″ x 2⅝″\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Weight\u003c\/td\u003e\n\u003ctd\u003e0.48 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Carton (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e12″ x 12″ x 6″\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e2 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e692041660147\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHTS Code\u003c\/td\u003e\n\u003ctd\u003e3926.90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States — Kansas City, MO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLaboratory and Clinical Applications\u003c\/h2\u003e\n\u003cp\u003eThe 51211 is deployed at clinical and laboratory positions requiring wall-mounted tissue box staging for compact, cube-format, or slim-profile tissue boxes, including clinical exam room tissue box holders, hospital bedside tissue staging, nursing station tissue box positions, laboratory bench tissue staging, pharmaceutical GMP manufacturing station tissue holders, dental operatory tissue wall staging, veterinary clinic exam room tissue holders, physical therapy treatment room tissue positions, academic research laboratory bench tissue staging, ambulatory surgery center waiting area tissue holders, and any indoor position where a compact or cube-format facial tissue box requires permanent wall-mounted, visually monitored clear PETG staging.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.trippnt.com\/shop\/51211-small-petg-tissue-box-holder-1098\/document\/1005\" target=\"_blank\" rel=\"noopener\"\u003eSales Sheet — 51211 Small PETG Tissue Box Holder (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMade in the U.S.A. \u0026amp; Lifetime Guarantee\u003c\/h2\u003e\n\u003cp\u003eProudly manufactured in the United States by TrippNT. This tissue box holder is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your facility. Institutional pricing and bulk discounts are available for universities, hospital systems, and government agencies.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow is the Small 51211 (2⅝″ depth) different from the other tissue box holder sizes — and how do I determine which depth is correct for my tissue brand?\u003c\/h3\u003e\n\u003cp\u003eAll three PETG tissue box holders (Small 51211 at 2⅝″, Medium 51234 at 3⅞″, Large 51140 at 5⅜″) share the same 5¼″ width and 9⅝″ height and differ only in depth. The depth dimension is the critical specification: it must match the front-to-back depth of your specific tissue box. Compact cube-format tissue boxes and slim single-tissue packs are approximately 2.5-inch to 3-inch deep — the Small 51211 is the correct specification for these formats. To verify: measure your tissue box from front face to back face. Match to the holder depth that provides approximately 0″–⅛″ clearance per side for the tension panels to engage. Contact TrippNT at 1-800-874-7768 for guidance on non-standard tissue box formats.\u003c\/p\u003e\n\u003ch3\u003eDoes the tension design damage the tissue box over time, and can the holder be reused with successive tissue boxes without degrading the tension?\u003c\/h3\u003e\n\u003cp\u003eThe open tension design applies gentle, low-force friction contact to the box sides — it does not puncture, clamp, or structurally deform standard tissue boxes during normal use. Successive tissue boxes are inserted and removed by pushing the new box into the holder from the open bottom (in vertical orientation) or open side (in horizontal orientation), which is a low-force action that does not fatigue or deform the PETG panels over normal use cycles. The PETG panel material retains its tension elasticity over years of normal use; the holder is designed for permanent installation with repeated tissue box replacement. Clean with soap and water or standard laboratory disinfectant wipes; avoid solvents that attack PETG (acetone, methylene chloride).\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"Product\",\n  \"name\": \"TrippNT Small PETG Tissue Box Holder — 51211\",\n  \"image\": [\n    \"https:\/\/www.trippnt.com\/web\/image\/product.product\/1008\/image_1024\/%5B51211%5D%20Small%20PETG%20Tissue%20Box%20Holder?unique=49cbc19\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/293\/image_1024\/51211.2.webp?unique=b8766b9\"\n  ],\n  \"description\": \"TrippNT 51211 Small PETG Tissue Box Holder. Clear 0.100-inch shatterproof PETG, open tension design, vertical or horizontal keyhole wall mount. 2⅝-inch depth. Hardware included. Made in USA. Lifetime Guarantee.\",\n  \"sku\": \"51211\",\n  \"gtin12\": \"692041660147\",\n  \"brand\": {\"@type\": \"Brand\", \"name\": \"TrippNT\"},\n  \"manufacturer\": {\"@type\": \"Organization\", \"name\": \"TrippNT, Inc.\", \"address\": {\"@type\": \"PostalAddress\", \"streetAddress\": \"10991 N Airworld Drive\", \"addressLocality\": \"Kansas City\", \"addressRegion\": \"MO\", \"postalCode\": \"64153\", \"addressCountry\": \"US\"}},\n  \"countryOfOrigin\": \"US\",\n  \"material\": \"0.100-inch Clear PETG\",\n  \"weight\": {\"@type\": \"QuantitativeValue\", \"value\": \"0.48\", \"unitCode\": \"LBR\"},\n  \"offers\": {\"@type\": \"Offer\", \"priceCurrency\": \"USD\", \"price\": \"30.31\", \"availability\": \"https:\/\/schema.org\/InStock\", \"warranty\": \"Lifetime\"}\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\"@type\": \"Question\", \"name\": \"How is the Small 51211 different from the other tissue box holder sizes?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"All three share 5.25-inch width and 9.625-inch height; they differ in depth only. Small 51211 (2.625 inches) fits compact cube and slim tissue boxes approximately 2.5 to 3 inches deep. Measure your tissue box front-to-back and match to the holder providing approximately 0 to 1\/8-inch clearance per side.\"}},\n    {\"@type\": \"Question\", \"name\": \"Does the tension design damage tissue boxes, and can the holder be reused with successive boxes?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The low-force friction contact does not puncture, clamp, or structurally deform standard tissue boxes. PETG panels retain their elasticity over years of normal insertion and removal cycles. Clean with soap and water or standard lab disinfectants. Avoid acetone, methylene chloride, and other PETG-attacking solvents.\"}}\n  ]\n}\n\u003c\/script\u003e","brand":"TrippNT","offers":[{"title":"Default Title","offer_id":48529115480296,"sku":"51211","price":30.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/5B51211_5D_20Small_20PETG_20Tissue_20Box_20Holder.webp?v=1778331826","url":"https:\/\/labsupplies.com\/products\/trippnt-small-petg-tissue-box-holder-51211","provider":"LabSupplies.com","version":"1.0","type":"link"}