{"product_id":"trippnt-single-hook-adjustable-surgical-helmet-rack-53942","title":"TrippNT Single Hook for Adjustable Surgical Helmet Rack | HDPE 2-Prong 50 lb Replacement 53942","description":"\u003ch2\u003eTechnical Narrative\u003c\/h2\u003e\n\u003cp\u003eThe TrippNT 53942 Single Hook for Adjustable Surgical Helmet Rack is the individual hook accessory for the 53940 48-inch (5-hook) and 53941 24-inch (3-hook) Adjustable Surgical Helmet Racks — purchased separately to replace a worn or damaged hook, or to add additional hooks to either rack up to the physical capacity of the installed rail. Each hook is a 2-prong white ¾″ HDPE unit that slides onto the rack rail from either end, positions anywhere along the rail by sliding to the desired location, and locks in place by hand-tightening a thumb screw — no tools required. The 2-prong geometry engages the hanging loop or yoke of Stryker® T3\/T4\/T5 surgical helmets and compatible powered air-purifying respirators at a secure double-contact point that distributes the weight of the helmet across two prong tips rather than a single-point hook, reducing the risk of helmet rotation or dislodgement during incidental contact in an active OR corridor.\u003c\/p\u003e\n\u003cp\u003eEach hook has a 50 lb weight capacity. Constructed from non-metal white HDPE, the hook is compatible with standard OR disinfectants and bleach wipe-down protocols. Weighs 1 lb. Ships in a 12″ x 12″ x 6″ carton. Backed by TrippNT’s 100% Lifetime Guarantee.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e¾″ White HDPE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\/Finish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProngs\u003c\/td\u003e\n\u003ctd\u003e2 prongs per hook\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight Capacity\u003c\/td\u003e\n\u003ctd\u003e50 lb per hook\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment\u003c\/td\u003e\n\u003ctd\u003eSlide to any position on rail, secure with thumb screw (no tools)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Racks\u003c\/td\u003e\n\u003ctd\u003e53940 (48-inch, 5-hook) and 53941 (24-inch, 3-hook)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Helmets\u003c\/td\u003e\n\u003ctd\u003eStryker® T3\/T4\/T5 and compatible surgical helmets with hanging loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Weight\u003c\/td\u003e\n\u003ctd\u003e1 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Carton (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e12″ x 12″ x 6″\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e4 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e734038892329\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHTS Code\u003c\/td\u003e\n\u003ctd\u003e3926.90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States — Kansas City, MO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLaboratory and Clinical Applications\u003c\/h2\u003e\n\u003cp\u003eThe 53942 individual hook is purchased for rack expansion or replacement in surgical and clinical environments, including adding a 6th hook to a 53940 48-inch rack when the OR team grows from 5 to 6 helmet assignments, replacing a damaged or worn hook on an existing 53940 or 53941 installation without replacing the entire rack assembly, adding hooks to a newly installed rack to bring it to full custom capacity, creating a custom hook count between the standard 3-hook (53941) and 5-hook (53940) configurations, and any OR, sterile processing, or procedure room environment where an existing TrippNT surgical helmet rack requires additional or replacement hook capacity without rack reinstallation.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.trippnt.com\/shop\/53942-single-hook-for-adjustable-surgical-helmet-rack-1244\/document\/1011\" target=\"_blank\" rel=\"noopener\"\u003eSales Sheet — 53942 Single Hook for Adjustable Surgical Helmet Rack (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMade in the U.S.A. \u0026amp; Lifetime Guarantee\u003c\/h2\u003e\n\u003cp\u003eProudly manufactured in the United States by TrippNT. This hook is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your facility. Institutional pricing available for multi-unit orders.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow many additional hooks can be added to a 53940 48-inch or 53941 24-inch rack, and is there a maximum safe hook count per rail?\u003c\/h3\u003e\n\u003cp\u003eThe 48-inch rail (53940) can physically accommodate approximately 8–10 hooks at standard helmet width spacing, though the rack ships with 5. Adding 3–5 additional 53942 hooks is practical for larger team configurations; the physical rail end-stop is the limit. The 24-inch rail (53941) can accommodate approximately 4–5 hooks at standard spacing, though it ships with 3. The structural limit per hook is 50 lb each — total rail load should not exceed the wall anchor rating for your specific installation (typically 100–200 lb distributed across the wall anchor points included with the rack). For high-load configurations with many heavy helmets, consult your facilities team to verify wall anchor ratings.\u003c\/p\u003e\n\u003ch3\u003eCan the 53942 hook be installed on the rack without removing the rack from the wall, and how long does installation take?\u003c\/h3\u003e\n\u003cp\u003eYes — adding a hook to an installed rack requires only sliding the hook onto either end of the rail (the hook end-cap must be temporarily removed on some configurations) and positioning it to the desired location, then tightening the thumb screw by hand. The entire process takes approximately 30–60 seconds with no tools. If the rack end-cap is a fixed stop requiring disassembly, remove the end-cap screw (Phillips head), slide the hook on, and replace the end-cap. The rack does not need to be removed from the wall for hook addition or repositioning in standard configurations.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"Product\",\n  \"name\": \"TrippNT Single Hook for Adjustable Surgical Helmet Rack — 53942\",\n  \"image\": [\n    \"https:\/\/www.trippnt.com\/web\/image\/product.product\/2313\/image_1024\/%5B53942%5D%20Single%20Hook%20for%20Adjustable%20Surgical%20Helmet%20Rack?unique=9348350\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/1192\/image_1024\/Single%20Hook%20for%20Adjustable%20Surgical%20Helmet%20Rack?unique=e2bca7f\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/1193\/image_1024\/Single%20Hook%20for%20Adjustable%20Surgical%20Helmet%20Rack?unique=e2bca7f\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/1194\/image_1024\/Single%20Hook%20for%20Adjustable%20Surgical%20Helmet%20Rack?unique=e2bca7f\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/1195\/image_1024\/Single%20Hook%20for%20Adjustable%20Surgical%20Helmet%20Rack?unique=e2bca7f\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/1169\/image_1024\/Single%20Hook%20for%20Adjustable%20Surgical%20Helmet%20Rack?unique=e2bca7f\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/1170\/image_1024\/Single%20Hook%20for%20Adjustable%20Surgical%20Helmet%20Rack?unique=e2bca7f\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/1198\/image_1024\/Single%20Hook%20for%20Adjustable%20Surgical%20Helmet%20Rack?unique=8d941f7\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/2463\/image_1024\/Single%20Hook%20for%20Adjustable%20Surgical%20Helmet%20Rack?unique=9348350\"\n  ],\n  \"description\": \"TrippNT 53942 Single Hook for Adjustable Surgical Helmet Rack. White 3\/4-inch HDPE, 2-prong, 50 lb capacity, thumb-screw slide-and-lock. Fits 53940 and 53941 racks. Replacement or expansion hook for Stryker T3\/T4\/T5 and compatible surgical helmets. Made in USA. Lifetime Guarantee.\",\n  \"sku\": \"53942\",\n  \"gtin12\": \"734038892329\",\n  \"brand\": {\"@type\": \"Brand\", \"name\": \"TrippNT\"},\n  \"manufacturer\": {\n    \"@type\": \"Organization\",\n    \"name\": \"TrippNT, Inc.\",\n    \"address\": {\n      \"@type\": \"PostalAddress\",\n      \"streetAddress\": \"10991 N Airworld Drive\",\n      \"addressLocality\": \"Kansas City\",\n      \"addressRegion\": \"MO\",\n      \"postalCode\": \"64153\",\n      \"addressCountry\": \"US\"\n    }\n  },\n  \"countryOfOrigin\": \"US\",\n  \"material\": \"3\/4-inch White HDPE\",\n  \"weight\": {\"@type\": \"QuantitativeValue\", \"value\": \"1\", \"unitCode\": \"LBR\"},\n  \"offers\": {\n    \"@type\": \"Offer\",\n    \"priceCurrency\": \"USD\",\n    \"price\": \"53.60\",\n    \"availability\": \"https:\/\/schema.org\/InStock\",\n    \"warranty\": \"Lifetime\"\n  }\n}\n\u003c\/script\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How many additional hooks can be added to a 53940 or 53941 rack, and is there a maximum safe hook count per rail?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The 48-inch rail can accommodate approximately 8 to 10 hooks at standard spacing; the 24-inch rail accommodates 4 to 5. The structural limit is 50 lb per hook; total rail load should not exceed the wall anchor rating for your installation. For high-load configurations, verify wall anchor ratings with your facilities team before adding hooks beyond the standard shipped count.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can the 53942 hook be installed on the rack without removing the rack from the wall?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes — slide the hook onto the rail end, position to the desired location, and tighten the thumb screw by hand. The process takes 30 to 60 seconds with no tools. If the rail has a fixed end-cap, remove the end-cap screw (Phillips head), slide the hook on, and replace the cap. The rack does not need to come off the wall.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n","brand":"TrippNT","offers":[{"title":"Default Title","offer_id":48527693775080,"sku":"53942","price":53.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/Single_20Hook_20for_20Adjustable_20Surgical_20Helmet_20Rack.jpg?v=1778289219","url":"https:\/\/labsupplies.com\/products\/trippnt-single-hook-adjustable-surgical-helmet-rack-53942","provider":"LabSupplies.com","version":"1.0","type":"link"}