{"product_id":"trippnt-single-hdpe-bottle-holder-500ml-50569","title":"TrippNT Single HDPE Bottle Holder 500mL | Chemical-Resistant Keyhole Wall Mount 50569","description":"\u003ch2\u003eTechnical Narrative\u003c\/h2\u003e\n\u003cp\u003eThe TrippNT 50569 Single HDPE Bottle Holder 500mL is a single-position white ¼″ HDPE wall-mounted bottle holder engineered to secure 500 mL laboratory bottles at the wall in fume hood interiors, bench-adjacent wall panels, and laboratory surfaces where the corrosion resistance of HDPE is required. The walled rectangular tray base cradles the bottle base, and the open-top circle slot at the top constrains the bottle neck, creating a two-contact secure hold that prevents 500 mL bottles from tipping or sliding without requiring straps or clamping mechanisms. The HDPE construction provides resistance to strong acids, strong bases, concentrated bleach, most organic solvents, and repeated sani-wipe and disinfectant cleaning without material degradation. Two pre-drilled keyhole slots on the rear panel accept standard wall hardware (included) for installation on gypsum board, tile, or wood-panel walls.\u003c\/p\u003e\n\u003cp\u003eAt 4⅛″ W x 3⅛″ H x 4⅛″ D and 0.36 lb, the 50569 stages one 500 mL bottle at a single wall position. The full HDPE 500mL family includes 50570 (Double), 50571 (Triple), 50539 (Quadruple); the ABS 500mL family (50016, 50017, 50011, 50157) provides the same form factor at a lower cost point for non-solvent environments. Backed by TrippNT’s 100% Lifetime Guarantee.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e¼″ White HDPE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\/Finish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e1 × 500 mL bottle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot Design\u003c\/td\u003e\n\u003ctd\u003eOpen-top circle slot with walled tray base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Type\u003c\/td\u003e\n\u003ctd\u003eKeyhole wall mount (hardware included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemical Resistance\u003c\/td\u003e\n\u003ctd\u003eHDPE — resistant to strong acids, bases, bleach, most organic solvents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Dimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e4⅛″ W x 3⅛″ H x 4⅛″ D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Weight\u003c\/td\u003e\n\u003ctd\u003e0.36 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Carton (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e12″ x 12″ x 6″\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e2 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e692041660321\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHTS Code\u003c\/td\u003e\n\u003ctd\u003e3926.90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States — Kansas City, MO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLaboratory and Clinical Applications\u003c\/h2\u003e\n\u003cp\u003eThe 50569 is deployed in chemical-exposure laboratory environments requiring HDPE-grade corrosion-resistant single 500 mL bottle staging, including organic chemistry fume hood interior solvent wash bottle staging, analytical chemistry bench HPLC solvent and mobile-phase bottle staging, pharmaceutical GMP bench reagent and disinfectant bottle staging in bleach-cleaned environments, microbiological BSC media and reagent bottle staging, environmental analytical chemistry fume hood acid and base solution bottle staging, food and beverage QC cleaning agent bottle staging, semiconductor cleanroom high-purity solvent wash bottle staging, pharmaceutical compounding solvent bottle staging, industrial QC reagent and standard solution bottle staging, and any laboratory wall position requiring HDPE-grade chemical-resistant secure single 500 mL staging at the point of use.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.trippnt.com\/shop\/50569-single-hdpe-bottle-holder-500ml-1080\/document\/1064\" target=\"_blank\" rel=\"noopener\"\u003eSales Sheet — 50569 Single HDPE Bottle Holder 500mL (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMade in the U.S.A. \u0026amp; Lifetime Guarantee\u003c\/h2\u003e\n\u003cp\u003eProudly manufactured in the United States by TrippNT. This bottle holder is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your laboratory. Institutional pricing and bulk discounts are available for universities, pharmaceutical companies, and government agencies.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhen should the HDPE 50569 be specified over the ABS single 500mL holder — what chemical environments specifically require HDPE?\u003c\/h3\u003e\n\u003cp\u003eSpecify the HDPE 50569 when the holder will contact: strong oxidizing acids (nitric, sulfuric, chromic); concentrated bleach or hypochlorite solutions; aromatic solvents (toluene, xylene); chlorinated solvents (methylene chloride, chloroform); or reagents that attack ABS. Specify the ABS equivalent for aqueous buffers, dilute alcohols (ethanol, IPA, methanol), and non-oxidizing reagents where ABS provides adequate resistance at lower cost. In fume hoods or BSC environments with regular solvent vapor exposure, HDPE is the safer specification even if the bottles staged do not directly contact the holder beyond the neck and base contact points.\u003c\/p\u003e\n\u003ch3\u003eHow does the Single 50569 fit into the HDPE 500mL family — when is one position sufficient vs. specifying the Double 50570, Triple 50571, or Quadruple 50539?\u003c\/h3\u003e\n\u003cp\u003eThe Single 50569 is the correct specification when only one 500 mL bottle category is staged at a given wall position — a single wash bottle beside a single instrument, or a single reagent bottle at a dedicated preparation station. Specify the Double 50570 for two-bottle positions (e.g., acid and water wash bottles side by side), the Triple 50571 for three-bottle fume hood configurations, and the Quadruple 50539 for four-bottle programs. All share the same HDPE circle-slot geometry and keyhole mounting; select the count that matches the bottle program at each wall position.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"Product\",\n  \"name\": \"TrippNT Single HDPE Bottle Holder 500mL — 50569\",\n  \"image\": [\n    \"https:\/\/www.trippnt.com\/web\/image\/product.product\/990\/image_1024\/%5B50569%5D%20Single%20HDPE%20Bottle%20Holder%20500mL?unique=8285526\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/605\/image_1024\/50569.2.webp?unique=2e88523\"\n  ],\n  \"description\": \"TrippNT 50569 Single HDPE Bottle Holder 500mL. White 1\/4-inch HDPE, 1 circle-slot position with walled spill-containment tray base, keyhole wall mount with hardware. 4⅛-inch W x 3⅛-inch H x 4⅛-inch D WHD. Chemical resistant. Made in USA. Lifetime Guarantee.\",\n  \"sku\": \"50569\",\n  \"gtin12\": \"692041660321\",\n  \"brand\": {\"@type\": \"Brand\", \"name\": \"TrippNT\"},\n  \"manufacturer\": {\"@type\": \"Organization\", \"name\": \"TrippNT, Inc.\", \"address\": {\"@type\": \"PostalAddress\", \"streetAddress\": \"10991 N Airworld Drive\", \"addressLocality\": \"Kansas City\", \"addressRegion\": \"MO\", \"postalCode\": \"64153\", \"addressCountry\": \"US\"}},\n  \"countryOfOrigin\": \"US\",\n  \"material\": \"1\/4-inch White HDPE\",\n  \"weight\": {\"@type\": \"QuantitativeValue\", \"value\": \"0.36\", \"unitCode\": \"LBR\"},\n  \"offers\": {\"@type\": \"Offer\", \"priceCurrency\": \"USD\", \"price\": \"45.14\", \"availability\": \"https:\/\/schema.org\/InStock\", \"warranty\": \"Lifetime\"}\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\"@type\": \"Question\", \"name\": \"When should the HDPE 50569 be specified over the ABS equivalent?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Specify HDPE for strong oxidizing acids, concentrated bleach, aromatic solvents (toluene, xylene), chlorinated solvents, or regular solvent vapor exposure in fume hoods or BSCs. Specify ABS for aqueous buffers, dilute alcohols, and non-oxidizing reagents where ABS is adequate and lower cost.\"}},\n    {\"@type\": \"Question\", \"name\": \"How does the Single 50569 fit into the HDPE 500mL family?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Specify Single 50569 for one-bottle wall positions. Choose Double 50570 for two bottles, Triple 50571 for three, Quadruple 50539 for four. All share the same HDPE circle-slot geometry and keyhole mounting.\"}}\n  ]\n}\n\u003c\/script\u003e","brand":"TrippNT","offers":[{"title":"Default Title","offer_id":48529089888488,"sku":"50569","price":45.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/5B50569_5D_20Single_20HDPE_20Bottle_20Holder_20500mL.jpg?v=1778331308","url":"https:\/\/labsupplies.com\/products\/trippnt-single-hdpe-bottle-holder-500ml-50569","provider":"LabSupplies.com","version":"1.0","type":"link"}