{"product_id":"trippnt-quadruple-side-loading-glove-box-holder-magnet-50953","title":"TrippNT Quadruple Side Loading Glove Box Holder with Magnet Mount | No-Drill BSC 50953","description":"\u003ch2\u003eTechnical Narrative\u003c\/h2\u003e\n\u003cp\u003eThe TrippNT 50953 Quadruple Side Loading Glove Box Holder with Magnet Mount provides 4-bay clear ⅜″ (3\/16″) acrylic side-loading glove box staging with rare-earth magnet backing for no-drill, tool-free attachment to any ferrous steel surface. It delivers the same ergonomic side-load design and front-slot glove dispensing as the keyhole-mount 50850, with the addition of instant positioning on BSC side baffles, instrument cart uprights, stainless steel panels, and any ferrous steel wall without drilling. Each of the four bays loads horizontally from the open left side, eliminating the overhead-lift ergonomic challenge of top-load holders at shoulder height or above. A front dispensing slot per bay allows single-glove pull without disturbing the holder.\u003c\/p\u003e\n\u003cp\u003eAt 10⅛″ x 21¾″ x 4⅝″ and 4.30 lb, the magnet version is slightly deeper than the keyhole version due to the magnet assembly. Ships fully assembled. Backed by TrippNT’s 100% Lifetime Guarantee. \u003cstrong\u003eMRI UNSAFE:\u003c\/strong\u003e the rare-earth magnet backing presents a projectile hazard in MRI Zone III and Zone IV environments. The keyhole-wall-mount version is 50850.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e⅜″ (3\/16″) Clear Acrylic, rare-earth magnet backing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\/Finish\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e4 glove boxes (Quadruple)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoading Style\u003c\/td\u003e\n\u003ctd\u003eSide-load (open left side) per bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDispensing Style\u003c\/td\u003e\n\u003ctd\u003eFront slot per bay for single-glove pull\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Type\u003c\/td\u003e\n\u003ctd\u003eMagnet (no-drill; attaches to ferrous steel surfaces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMRI Safety\u003c\/td\u003e\n\u003ctd\u003eMRI UNSAFE — magnet backing presents projectile hazard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Dimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e10⅛″ x 21¾″ x 4⅝″\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Weight\u003c\/td\u003e\n\u003ctd\u003e4.30 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Carton (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e20″ x 14″ x 12″\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e692041659615\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHTS Code\u003c\/td\u003e\n\u003ctd\u003e3926.90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States — Kansas City, MO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLaboratory and Clinical Applications\u003c\/h2\u003e\n\u003cp\u003eThe 50953 is deployed across laboratory and clinical environments requiring 4-size no-drill ferrous-surface glove staging, including BSC side-baffle glove box staging where drilling is not permitted, instrument cart steel-upright glove staging that must be repositionable, stainless steel lab furniture glove management, pharmaceutical GMP corridor stainless steel PPE stations, hospital and clinical procedure room ferrous wall glove staging, ED and ICU cart steel upright glove staging, dental operatory metal cabinetry glove management, veterinary clinic stainless-surface glove staging, cleanroom anteroom gowning steel-panel glove staging, pharmaceutical compounding anteroom no-drill glove staging, and any installation where the ergonomic side-load design of the keyhole 50850 is needed on a ferrous surface without drilling.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.trippnt.com\/shop\/50953-quadruple-side-loading-glove-box-holder-magnet-883\/document\/962\" target=\"_blank\" rel=\"noopener\"\u003eSales Sheet — 50953 Quadruple Side Loading Glove Box Holder Magnet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMade in the U.S.A. \u0026amp; Lifetime Guarantee\u003c\/h2\u003e\n\u003cp\u003eProudly manufactured in the United States by TrippNT. This glove box holder is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your laboratory. Institutional pricing and bulk discounts are available for universities, hospital systems, and government agencies.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhen should the magnet 50953 be specified instead of the keyhole 50850 — what installation scenarios specifically require the magnet version?\u003c\/h3\u003e\n\u003cp\u003eSpecify the magnet 50953 when: the installation surface is ferrous steel (BSC baffle, stainless steel wall panel, cart upright) where drilling is not permitted or would void equipment warranties; the glove staging position must be repositionable as room configurations, procedures, or tenancy change; rapid deployment without facility maintenance involvement is required; or the installation is temporary (e.g., during a renovation or pilot program). Specify the keyhole 50850 for permanent installations on gypsum board, wood-framed walls, or tile surfaces where drill-and-anchor installation is appropriate and the position is fixed long-term. The magnet version costs more per unit than the keyhole version; the premium is justified by the ferrous-surface, no-drill, repositionable use case.\u003c\/p\u003e\n\u003ch3\u003eIs the magnet holding force sufficient to keep the 50953 securely attached to a BSC side baffle loaded with 4 full glove boxes, and what surface conditions reduce holding force?\u003c\/h3\u003e\n\u003cp\u003eThe rare-earth magnet backing provides sufficient holding force on standard 16-gauge or heavier cold-rolled steel or stainless-steel BSC baffle panels for a fully loaded unit through normal BSC operations. Surface conditions that reduce holding force include: panels below 16-gauge thickness (thinner ferrous sheets reduce the ferromagnetic coupling); non-ferrous coatings or paint layers over the steel (each layer reduces coupling in proportion to its thickness); and stainless steel grades with lower magnetic permeability (304\/316 stainless is paramagnetic — some holding force; 430 ferritic stainless provides stronger coupling). Test with a fully loaded unit on your specific panel before committing to a production deployment on non-standard surfaces.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"Product\",\n  \"name\": \"TrippNT Quadruple Side Loading Glove Box Holder with Magnet Mount — 50953\",\n  \"image\": [\n    \"https:\/\/www.trippnt.com\/web\/image\/product.product\/793\/image_1024\/%5B50953%5D%20Quadruple%20Side%20Loading%20Glove%20Box%20Holder%20Magnet?unique=8f3799d\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/704\/image_1024\/50953.2.webp?unique=128e20e\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/1340\/image_1024\/DWG%20-%2050953.1%20-%20Rev%207.webp?unique=0a3f0c3\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/2414\/image_1024\/Quadruple%20Side%20Loading%20Glove%20Box%20Holder%20Magnet?unique=8f3799d\"\n  ],\n  \"description\": \"TrippNT 50953 Quadruple Side Loading Glove Box Holder with Magnet Mount. Clear 3\/16-inch acrylic, 4 bay, side-load open left, front dispensing slot per bay, rare-earth magnet backing. 10⅛\u0026Prime; x 21¾\u0026Prime; x 4⅝\u0026Prime; WHD. MRI UNSAFE. Made in USA. Lifetime Guarantee.\",\n  \"sku\": \"50953\",\n  \"gtin12\": \"692041659615\",\n  \"brand\": {\"@type\": \"Brand\", \"name\": \"TrippNT\"},\n  \"manufacturer\": {\n    \"@type\": \"Organization\",\n    \"name\": \"TrippNT, Inc.\",\n    \"address\": {\n      \"@type\": \"PostalAddress\",\n      \"streetAddress\": \"10991 N Airworld Drive\",\n      \"addressLocality\": \"Kansas City\",\n      \"addressRegion\": \"MO\",\n      \"postalCode\": \"64153\",\n      \"addressCountry\": \"US\"\n    }\n  },\n  \"countryOfOrigin\": \"US\",\n  \"material\": \"3\/16-inch Clear Acrylic, Rare-Earth Magnet Backing\",\n  \"weight\": {\"@type\": \"QuantitativeValue\", \"value\": \"4.30\", \"unitCode\": \"LBR\"},\n  \"offers\": {\n    \"@type\": \"Offer\",\n    \"priceCurrency\": \"USD\",\n    \"price\": \"222.49\",\n    \"availability\": \"https:\/\/schema.org\/InStock\",\n    \"warranty\": \"Lifetime\"\n  }\n}\n\u003c\/script\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"When should the magnet 50953 be specified instead of the keyhole 50850 — what installation scenarios specifically require the magnet version?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Specify the magnet 50953 for ferrous steel surfaces (BSC baffles, stainless walls, cart uprights) where drilling is not permitted, when the position must be repositionable, or when rapid no-tool deployment is required. Specify the keyhole 50850 for permanent gypsum board, wood, or tile wall installations. The magnet premium is justified by the no-drill, repositionable use case.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the magnet holding force sufficient to keep the 50953 securely attached to a BSC side baffle loaded with 4 full glove boxes?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The rare-earth magnet provides sufficient holding force on 16-gauge or heavier cold-rolled steel and stainless BSC baffle panels for a fully loaded unit. Holding force is reduced by thinner panels, non-ferrous coatings over the steel, and lower-permeability stainless grades (304\/316 vs. 430 ferritic). Test with a fully loaded unit on non-standard surfaces before committing to a production deployment.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"TrippNT","offers":[{"title":"Default Title","offer_id":48521622847720,"sku":"50953","price":222.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/5B50953_5D_20Quadruple_20Side_20Loading_20Glove_20Box_20Holder_20Magnet_fbbcdfe2-a870-49f6-bb86-0a8221cd2283.jpg?v=1778179668","url":"https:\/\/labsupplies.com\/products\/trippnt-quadruple-side-loading-glove-box-holder-magnet-50953","provider":"LabSupplies.com","version":"1.0","type":"link"}