{"product_id":"trippnt-quadruple-abs-bottle-holder-1000ml-50189","title":"TrippNT Quadruple ABS Bottle Holder 1000 mL | HPLC Quaternary Fume Hood 4-Pos 50189","description":"\u003ch2\u003eTechnical Narrative\u003c\/h2\u003e\n\u003cp\u003eThe TrippNT 50189 Quadruple ABS Bottle Holder, 1000 mL is the largest member of the 1000 mL bottle-restraint family, engineered for HPLC benches, extraction stations, and fume-hood solvent zones where four 1-liter mobile-phase or reagent bottles must be held side-by-side in a single wall-mount strip. Each of the four positions uses the same ⅛″ white ABS open-rectangular body and 3.75″ circular collar to create a two-point restraint — neck registered at the top, base captured in the open body — holding each bottle upright through vibration, fume-hood airflow, and incidental contact. Aligning four 1-liter bottles at consistent height and spacing supports HPLC quaternary mobile-phase sets (A\/B\/C\/D) and paired solvent plus wash\/rinse arrays on a single fixture.\u003c\/p\u003e\n\u003cp\u003eExternal dimensions are 17½″ W x 4¼″ H x 4⅞″ D with a 0.6 lb finished weight. The 17½″ strip fits on standard 48″, 60″, and 72″ fume-hood side panels with margin. Wall-mount keyhole slots and mounting hardware are included. Ships fully assembled. Backed by TrippNT’s 100% Lifetime Guarantee. Scales within the same 1000 mL family to Single (50080), Double (50085), and Triple (50411); all share the same 3.75″ collar, 4¼″ H x 4⅞″ D profile, and keyhole mounting pattern.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e⅛″ White ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\/Finish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e4 × 1000 mL bottles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCollar Diameter\u003c\/td\u003e\n\u003ctd\u003e3.75″ per position\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Type\u003c\/td\u003e\n\u003ctd\u003eKeyhole wall mount (hardware included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Dimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e17½″ x 4¼″ x 4⅞″\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Weight\u003c\/td\u003e\n\u003ctd\u003e0.6 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Carton (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e20″ x 14″ x 12″\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e4 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e692041660307\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHTS Code\u003c\/td\u003e\n\u003ctd\u003e3926.90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States — Kansas City, MO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLaboratory and Clinical Applications\u003c\/h2\u003e\n\u003cp\u003eThe 50189 is deployed across regulated and research environments requiring four-position 1-liter bottle restraint, including HPLC quaternary mobile-phase staging, pharmaceutical QC and API synthesis fume hoods, biotechnology R\u0026amp;D extraction and purification solvent zones, USP 800 hazardous drug compounding hoods requiring four 1-liter bottle positions, environmental and water-quality testing HPLC mobile-phase stations, academic analytical chemistry and preparative HPLC fume hoods, forensic toxicology quaternary solvent staging, food-and-beverage R\u0026amp;D extraction benches, industrial QC multi-channel chromatography solvent management, and flammable-storage cabinet interior four-bottle restraint. Pairs with the single (50080), double (50085), and triple (50411) for mixed-channel installations using one hardware system.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.trippnt.com\/shop\/50189-quadruple-abs-bottle-holder-1000-ml-1063\/document\/977\" target=\"_blank\" rel=\"noopener\"\u003eSales Sheet — 50189 Quadruple ABS Bottle Holder 1000 mL (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMade in the U.S.A. \u0026amp; Lifetime Guarantee\u003c\/h2\u003e\n\u003cp\u003eProudly manufactured in the United States by TrippNT. This bottle holder is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your laboratory. Institutional pricing and bulk discounts are available for universities, hospital systems, and government agencies.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs the 50189 suited for HPLC quaternary pump mobile-phase staging — do standard 1-liter HPLC solvent bottles fit all four positions?\u003c\/h3\u003e\n\u003cp\u003eYes. The four 3.75″ collar positions accommodate standard 1-liter HPLC-grade glass and HDPE solvent bottles from Honeywell\/Burdick \u0026amp; Jackson, Fisher Chemical, Sigma-Aldrich, and VWR, whose 1-liter neck profiles are consistent with the 3.75″ collar geometry. For quaternary gradient systems (A, B, C, D channels), the 50189 aligns all four mobile-phase bottles at uniform height with consistent tubing-adapter clearance. For binary HPLC (A\/B), specify the double holder 50085 instead.\u003c\/p\u003e\n\u003ch3\u003eHow does the 50189 four-position 1-liter strip compare to the 50157 four-position 500 mL strip — when do I use each?\u003c\/h3\u003e\n\u003cp\u003eBoth are four-position ABS bottle-holder strips sharing the same keyhole mounting pattern and 4¼″ H profile. Specify the 50189 (17½″ W, 3.75″ collar) when using 1-liter HPLC mobile-phase or reagent bottles. Specify the 50157 (14⅞″ W, smaller collar) when using 500 mL bottles. The 50189 is 2⅝″ wider than the 50157 to accommodate the larger 1-liter bottle base diameter; both fit standard 48″ and larger fume-hood side panels.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"Product\",\n  \"name\": \"TrippNT Quadruple ABS Bottle Holder 1000 mL — 50189\",\n  \"image\": [\n    \"https:\/\/www.trippnt.com\/web\/image\/product.product\/973\/image_1024\/%5B50189%5D%20Quadruple%20ABS%20Bottle%20Holder%201000%20mL?unique=8ef3c28\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/507\/image_1024\/50189.2.webp?unique=ac7b8c4\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/1276\/image_1024\/DWG%20-%2050189.1%20-%20Rev%203.webp?unique=e5a12b0\"\n  ],\n  \"description\": \"TrippNT 50189 Quadruple ABS Bottle Holder, 1000 mL. White 1\/8-inch ABS four-position wall-mount strip with 3.75-inch collars and keyhole hardware. Holds four 1-liter lab bottles. HPLC quaternary mobile-phase staging. Made in USA. Lifetime Guarantee.\",\n  \"sku\": \"50189\",\n  \"gtin12\": \"692041660307\",\n  \"brand\": {\"@type\": \"Brand\", \"name\": \"TrippNT\"},\n  \"manufacturer\": {\n    \"@type\": \"Organization\",\n    \"name\": \"TrippNT, Inc.\",\n    \"address\": {\n      \"@type\": \"PostalAddress\",\n      \"streetAddress\": \"10991 N Airworld Drive\",\n      \"addressLocality\": \"Kansas City\",\n      \"addressRegion\": \"MO\",\n      \"postalCode\": \"64153\",\n      \"addressCountry\": \"US\"\n    }\n  },\n  \"countryOfOrigin\": \"US\",\n  \"material\": \"1\/8-inch White ABS\",\n  \"weight\": {\"@type\": \"QuantitativeValue\", \"value\": \"0.6\", \"unitCode\": \"LBR\"},\n  \"offers\": {\n    \"@type\": \"Offer\",\n    \"priceCurrency\": \"USD\",\n    \"price\": \"60.63\",\n    \"availability\": \"https:\/\/schema.org\/InStock\",\n    \"warranty\": \"Lifetime\"\n  }\n}\n\u003c\/script\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the 50189 suited for HPLC quaternary pump mobile-phase staging — do standard 1-liter HPLC solvent bottles fit all four positions?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The four 3.75-inch collar positions accommodate standard 1-liter HPLC-grade glass and HDPE solvent bottles from Honeywell\/Burdick \u0026 Jackson, Fisher Chemical, Sigma-Aldrich, and VWR. For binary HPLC (A\/B only), specify the double holder 50085 instead.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does the 50189 four-position 1-liter strip compare to the 50157 four-position 500 mL strip — when do I use each?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Specify the 50189 (17.5-inch W, 3.75-inch collar) for 1-liter HPLC mobile-phase or reagent bottles. Specify the 50157 (14.875-inch W, smaller collar) for 500 mL bottles. Both share the same keyhole mounting pattern and fit standard 48-inch and larger fume-hood side panels.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n","brand":"TrippNT","offers":[{"title":"Default Title","offer_id":48501892841704,"sku":"50189","price":60.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/5B50189_5D_20Quadruple_20ABS_20Bottle_20Holder_201000_20mL.jpg?v=1778270265","url":"https:\/\/labsupplies.com\/products\/trippnt-quadruple-abs-bottle-holder-1000ml-50189","provider":"LabSupplies.com","version":"1.0","type":"link"}