{"product_id":"trippnt-dissolution-vessel-holder-50354","title":"TrippNT Dissolution Vessel Holder | 6-Position USP 711 PVC Carrier Tray 50354","description":"\u003ch2\u003eTechnical Narrative\u003c\/h2\u003e\n\u003cp\u003eThe TrippNT 50354 Dissolution Vessel Holder is a procurement-grade pharmaceutical QC accessory engineered for USP Apparatus 1 (basket) and Apparatus 2 (paddle) dissolution testing stations where six 1-liter dissolution vessels must be transported as a group between the dissolution bath, rinsing station, and storage area without individual handling of each vessel — reducing the risk of vessel-to-vessel contamination, vessel damage from contact, and technician fatigue from carrying six heavy 1-liter glass vessels individually. Six white ¼″ PVC rectangular openings, each sized at 4⅜″ diameter, register the vessel body below the flange and hold all six in a fixed 6-position array. Open-corner cutouts at each bay allow bath water and rinse water to drain freely without pooling.\u003c\/p\u003e\n\u003cp\u003eExternal dimensions are 17⅛″ W x 5⅛″ H x 12⅛″ D with a 2.58 lb finished weight — sized to hold the standard 6-vessel array of all major dissolution apparatus models (Distek, SOTAX, Hanson\/Teledyne, Agilent, Logan Instruments, Pharma Test) whose vessel positions are standardized at 77 mm (3.03″) center-to-center spacing. The non-porous ¼″ white PVC construction withstands immersion in dissolution media (aqueous buffers, 0.1N HCl, simulated intestinal fluid) and routine wipe-down with IPA. Ships fully assembled. Backed by TrippNT’s 100% Lifetime Guarantee.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e¼″ White PVC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\/Finish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e6 dissolution vessels (up to 4⅜″ diameter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVessel Opening Diameter\u003c\/td\u003e\n\u003ctd\u003e4⅜″ (4.375″) per position\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrainage Design\u003c\/td\u003e\n\u003ctd\u003eOpen corners at each bay for water flow-through and draining\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Type\u003c\/td\u003e\n\u003ctd\u003eFree-standing transport tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Dimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e17⅛″ x 5⅛″ x 12⅛″\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Weight\u003c\/td\u003e\n\u003ctd\u003e2.58 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Carton (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e20″ x 14″ x 12″\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e5 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e692041659912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHTS Code\u003c\/td\u003e\n\u003ctd\u003e3926.90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States — Kansas City, MO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eLaboratory and Clinical Applications\u003c\/h2\u003e\n\u003cp\u003eThe 50354 is deployed across pharmaceutical and regulated analytical environments requiring grouped 6-vessel dissolution vessel handling, including pharmaceutical QC release testing labs running USP Apparatus 1 (basket) and Apparatus 2 (paddle) dissolution tests, pharmaceutical R\u0026amp;D dissolution method development labs, contract research and testing laboratories (CROs\/CTLs), USP and ICH dissolution test method transfer labs, FDA and EMA GMP-compliant dissolution testing suites, pharmaceutical formulation development groups, generic drug filing (ANDA) dissolution data generation labs, nutraceutical and dietary supplement QC dissolution labs, veterinary pharmaceutical QC dissolution labs, and academic pharmacy and pharmaceutical sciences teaching labs where dissolution testing is part of the curriculum. The carrier is specified wherever SOPs require intact 6-vessel removal from the dissolution bath rather than individual vessel retrieval.\u003c\/p\u003e\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cp\u003eFor the latest sales sheet, dimensional drawings, and technical specifications for the 50354 Dissolution Vessel Holder, contact support@labsupplies.com. An engineering drawing is available in the image gallery above.\u003c\/p\u003e\n\u003ch2\u003eMade in the U.S.A. \u0026amp; Lifetime Guarantee\u003c\/h2\u003e\n\u003cp\u003eProudly manufactured in the United States by TrippNT. This dissolution vessel holder is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your laboratory. Institutional pricing and bulk discounts are available for universities, hospital systems, and government agencies.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs the 50354 compatible with all major dissolution apparatus brands — Distek, SOTAX, Hanson, Agilent, Logan — and what vessel types fit the 4⅜-inch openings?\u003c\/h3\u003e\n\u003cp\u003eThe 4⅜″ (4.375″) diameter openings are sized for the standard 1-liter USP glass dissolution vessel used across all major apparatus brands including Distek Evolution 6100, SOTAX AT7, Hanson\/Teledyne SR-8 Plus, Agilent 708-DS, Logan LDT-600, and Pharma Test PTWS 810D. Standard 1-liter round-bottom and flat-bottom borosilicate dissolution vessels from Kimble, Pyrex, Gerresheimer, and equivalent suppliers all measure approximately 103–108 mm (4.05–4.25″) outer diameter below the flange, fitting within the 4⅜″ opening. Vessels with non-standard flange geometries or proprietary shapes should be measured before assuming fit. The 50354 is not designed for mini-vessel (200 mL or 500 mL) or flow-through cell apparatus configurations.\u003c\/p\u003e\n\u003ch3\u003eHow does the open-corner drainage design work during vessel transfer from the dissolution bath, and does the carrier introduce cross-contamination risk between vessels?\u003c\/h3\u003e\n\u003cp\u003eThe open-corner cutouts at each bay position are designed to allow bath water or rinse water to flow freely downward and out of the carrier as it is lifted from the dissolution bath, without trapping liquid against the vessel exterior or between adjacent bays. This prevents pooling water from running from one vessel position to an adjacent vessel during transport to the rinsing station. The six bays are physically separated by ¼″ PVC walls; no cross-contamination pathway exists between bays during dry transport. For validated dissolution testing SOPs with strict cross-contamination controls, verify your specific risk assessment confirms that the PVC bay walls provide adequate separation between adjacent vessel positions.\u003c\/p\u003e\n\u003cp\u003e\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"Product\",\n  \"name\": \"TrippNT Dissolution Vessel Holder — 50354\",\n  \"image\": [\n    \"https:\/\/www.trippnt.com\/web\/image\/product.product\/867\/image_1024\/%5B50354%5D%20Dissolution%20Vessel%20Holder?unique=1177b62\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/558\/image_1024\/50354.2.webp?unique=7811996\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/559\/image_1024\/50354.3.webp?unique=7811996\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/560\/image_1024\/50354.4.webp?unique=7811996\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/561\/image_1024\/50354.5.webp?unique=7811996\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/562\/image_1024\/50354.6-01.webp?unique=7811996\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/1290\/image_1024\/DWG%20-%2050354.1%20-%20Rev%205.webp?unique=ec2d410\"\n  ],\n  \"description\": \"TrippNT 50354 Dissolution Vessel Holder. White 1\/4-inch PVC 6-position transport carrier with 4.375-inch diameter openings and open-corner drainage. Holds all six standard 1-liter USP dissolution vessels simultaneously. USP Apparatus 1\/2 compatible. Made in USA. Lifetime Guarantee.\",\n  \"sku\": \"50354\",\n  \"gtin12\": \"692041659912\",\n  \"brand\": {\"@type\": \"Brand\", \"name\": \"TrippNT\"},\n  \"manufacturer\": {\n    \"@type\": \"Organization\",\n    \"name\": \"TrippNT, Inc.\",\n    \"address\": {\n      \"@type\": \"PostalAddress\",\n      \"streetAddress\": \"10991 N Airworld Drive\",\n      \"addressLocality\": \"Kansas City\",\n      \"addressRegion\": \"MO\",\n      \"postalCode\": \"64153\",\n      \"addressCountry\": \"US\"\n    }\n  },\n  \"countryOfOrigin\": \"US\",\n  \"material\": \"1\/4-inch White PVC\",\n  \"weight\": {\"@type\": \"QuantitativeValue\", \"value\": \"2.58\", \"unitCode\": \"LBR\"},\n  \"offers\": {\n    \"@type\": \"Offer\",\n    \"priceCurrency\": \"USD\",\n    \"price\": \"174.77\",\n    \"availability\": \"https:\/\/schema.org\/InStock\",\n    \"warranty\": \"Lifetime\"\n  }\n}\n\u003c\/script\u003e \u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the 50354 compatible with all major dissolution apparatus brands — Distek, SOTAX, Hanson, Agilent, Logan — and what vessel types fit the 4⅜-inch openings?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The 4.375-inch openings accommodate standard 1-liter USP glass dissolution vessels from all major apparatus brands including Distek, SOTAX, Hanson\/Teledyne, Agilent, Logan, and Pharma Test. Standard 1-liter borosilicate vessels from Kimble, Pyrex, and Gerresheimer measure approximately 103 to 108 mm OD below the flange, fitting within the 4.375-inch opening. Measure non-standard vessels before assuming fit.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does the open-corner drainage design work during vessel transfer from the dissolution bath, and does the carrier introduce cross-contamination risk between vessels?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The open-corner cutouts allow bath or rinse water to flow freely downward and out of the carrier as it is lifted from the bath, preventing liquid from pooling against the vessel exterior or running between adjacent bays during transport. The six bays are separated by 1\/4-inch PVC walls with no direct cross-contamination pathway between positions during dry transport.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\u003c\/p\u003e","brand":"TrippNT","offers":[{"title":"Default Title","offer_id":48516380033256,"sku":"50354","price":174.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/5B50354_5D_20Dissolution_20Vessel_20Holder_63035bb6-7ebc-4b2c-97f6-3ec5a0029a8c.jpg?v=1778120379","url":"https:\/\/labsupplies.com\/products\/trippnt-dissolution-vessel-holder-50354","provider":"LabSupplies.com","version":"1.0","type":"link"}