{"product_id":"trippnt-51817-mri-core-dx-extended-top-sliding-door","title":"TrippNT MRI Core DX Extended Top Cart with Sliding Door | Non-Ferrous MR Conditional HDPE Cart 51817","description":"\u003ch2\u003eTechnical Narrative\u003c\/h2\u003e\n\u003cp\u003eThe TrippNT 51817 MRI Core DX Extended Top Cart with Sliding Door is the wide-format variant of TrippNT’s MRI Core DX cart line — a 28\u0026amp;frac78; × 33\u0026amp;frac38; × 19¼″ (W × H × D), 75 lb non-ferrous HDPE cart that adds a 28\u0026amp;frac78; × 19\u0026amp;frac58;″ extended flat work surface to the standard MRI Core DX feature set: three drawers, six side compartments (two dispensing, four enclosed), PETG sliding-door bulk storage, and a tool holder. The 6-inch wider format and extended work surface accommodate procedure tray setup, tablet staging, and supply preparation tasks that the narrower 22\u0026amp;frac78;-inch MRI Core DX cannot. All metal components are limited to stainless steel fasteners and aluminum composite drawer fronts — no ferromagnetic hardware. The 2-inch non-ferrous casters provide suite mobility. Ships fully assembled via LTL freight. Always verify MR Conditional status with your facility MR safety officer before deploying near the scanner room.\u003c\/p\u003e\n\u003cp\u003eConstructed from ½″ HDPE, \u0026amp;frac18;″ ABS, and \u0026amp;frac18;″ PETG, the cart withstands IPA, dilute bleach, and standard MRI suite decontamination protocols. Two comfortable built-in handles in the extended top allow two-hand control during repositioning. Drawer slides use plastic detent rather than steel ball-bearing races for MR compatibility. No drawer lock is provided.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e½″ HDPE, \u0026amp;frac18;″ ABS, \u0026amp;frac18;″ PETG (non-ferrous)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMRI Safety\u003c\/td\u003e\n\u003ctd\u003eMR Conditional — non-ferrous construction; verify with MR safety officer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eExtended Work Surface\u003c\/td\u003e\n\u003ctd\u003e28\u0026amp;frac78; × 19\u0026amp;frac58;″ flat HDPE top with 2 built-in handles\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDrawers\u003c\/td\u003e\n\u003ctd\u003e3 white drawers with plastic non-metal slides\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSide Compartments\u003c\/td\u003e\n\u003ctd\u003e4 enclosed shelf wings + 2 dispensing wings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBulk Storage\u003c\/td\u003e\n\u003ctd\u003e1 area with PETG clear sliding door\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTool Holder\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCart Top Style\u003c\/td\u003e\n\u003ctd\u003eFlat Extended Top with Built-in Handles\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDrawer Lock\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCasters\u003c\/td\u003e\n\u003ctd\u003e4 non-ferrous, 2-inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Dimensions (W × H × D)\u003c\/td\u003e\n\u003ctd\u003e28\u0026amp;frac78; × 33\u0026amp;frac38; × 19¼″\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Weight\u003c\/td\u003e\n\u003ctd\u003e75 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping Method\u003c\/td\u003e\n\u003ctd\u003eLTL Freight\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping Carton\u003c\/td\u003e\n\u003ctd\u003e30 × 22 × 40 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e125 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e727431143822\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHTS Code\u003c\/td\u003e\n\u003ctd\u003e9403.7\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States — Kansas City, MO\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLaboratory and Clinical Applications\u003c\/h2\u003e\n\u003cp\u003eThe TrippNT 51817 MRI Core DX Extended Top Cart is specified for MRI suite positions requiring a non-ferrous mobile supply and procedure prep cart with an extended work surface, including hospital MRI scanner room procedure prep positions where a wide extended top surface is required for tray setup and tablet staging alongside mobile supply access, hospital interventional MRI suite procedure supply and prep carts requiring extended work surface alongside drawer and shelf storage, academic medical center MRI research suite carts requiring an extended work surface for protocol documentation and equipment staging, hospital cardiac MRI suite procedure prep carts, hospital pediatric MRI suite carts requiring more accessible work surface height and width, freestanding imaging center MRI suite procedure prep positions, hospital breast MRI suite procedure prep carts, hospital musculoskeletal MRI suite carts requiring an extended work surface for procedure setup, and any MRI suite environment where the standard 22\u0026amp;frac78;-inch MRI Core DX cart cannot accommodate the work surface requirement for procedure prep, tablet staging, or supply tray organization.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.trippnt.com\/shop\/51817-mri-core-dx-extend-top-with-sliding-door-1020\/document\/1105\" target=\"_blank\" rel=\"noopener\"\u003eSales Sheet — TrippNT 51817 MRI Core DX Extended Top with Sliding Door (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMade in the U.S.A. \u0026amp; Lifetime Guarantee\u003c\/h2\u003e\n\u003cp\u003eProudly manufactured in the United States by TrippNT. This MRI cart is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your laboratory. Institutional pricing and bulk discounts are available for universities, hospital systems, and government agencies.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between the MRI Core DX Extended Top (51817) and the standard MRI Core DX (51728), and when is the extended top the correct specification?\u003c\/h3\u003e\n\u003cp\u003eThe 51817 Extended Top (28\u0026amp;frac78;″ wide, 75 lb, LTL) and the 51728 standard (22\u0026amp;frac78;″ wide, 65 lb, small parcel) share the same non-ferrous HDPE construction, 2-inch casters, three drawers, six side compartments, PETG sliding-door bulk storage, and tool holder. The Extended Top adds a 28\u0026amp;frac78; × 19\u0026amp;frac58;″ flat work surface with two built-in handles and is 6″ wider. Specify the Extended Top when procedure tray setup, tablet staging, or supply preparation tasks require more usable flat surface than the 22\u0026amp;frac78;-inch cart can provide. The standard 51728 ships small parcel; the 51817 ships LTL at $339.37 more.\u003c\/p\u003e\n\u003ch3\u003eWhat is the institutional pricing structure for the 51817, and can it be ordered alongside other TrippNT MRI products?\u003c\/h3\u003e\n\u003cp\u003eLabSupplies.com provides tiered institutional pricing for hospital MRI departments, academic medical imaging centers, federal government hospitals, and government radiology facilities. Volume discounts apply at checkout. The 51817, 51728 MRI Core DX, and 54038 MRI Compact Cart are all on the same institutional pricing program and can be included in a single institutional transaction.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"Product\",\n  \"name\": \"TrippNT MRI Core DX Extended Top Cart with Sliding Door\",\n  \"description\": \"TrippNT 51817 MRI Core DX Extended Top with Sliding Door. Non-ferrous HDPE\/ABS\/PETG, 3 drawers, 6 side compartments, PETG sliding door, tool holder, 28 7\/8 x 19 5\/8 in extended work surface, 2-inch non-ferrous casters, 28 7\/8 x 33 3\/8 x 19 1\/4 inches (WHD), 75 lb. MR Conditional. Ships LTL. USA-made. Lifetime Guarantee.\",\n  \"sku\": \"51817\",\n  \"gtin12\": \"727431143822\",\n  \"brand\": {\"@type\": \"Brand\", \"name\": \"TrippNT\"},\n  \"manufacturer\": {\"@type\": \"Organization\", \"name\": \"TrippNT\", \"address\": {\"@type\": \"PostalAddress\", \"streetAddress\": \"10991 N Airworld Drive\", \"addressLocality\": \"Kansas City\", \"addressRegion\": \"MO\", \"postalCode\": \"64153\", \"addressCountry\": \"US\"}},\n  \"countryOfOrigin\": \"US\",\n  \"material\": \"Non-ferrous HDPE, ABS, and PETG\",\n  \"weight\": {\"@type\": \"QuantitativeValue\", \"value\": 75, \"unitCode\": \"LBR\"},\n  \"offers\": {\"@type\": \"Offer\", \"priceCurrency\": \"USD\", \"price\": \"2237.54\", \"availability\": \"https:\/\/schema.org\/InStock\", \"seller\": {\"@type\": \"Organization\", \"name\": \"LabSupplies.com\"}},\n  \"warranty\": {\"@type\": \"WarrantyPromise\", \"durationOfWarranty\": {\"@type\": \"QuantitativeValue\", \"value\": \"Lifetime\"}}\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\"@type\": \"Question\", \"name\": \"What is the difference between the MRI Core DX Extended Top (51817) and the standard MRI Core DX (51728)?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The Extended Top (51817) is 28 7\/8-inch wide (vs 22 7\/8 for 51728), adds a 28 7\/8 x 19 5\/8-inch flat work surface, weighs 75 lb (vs 65 lb), and ships LTL (vs small parcel). Specify the Extended Top when procedure tray setup or tablet staging requires more flat surface than the standard cart provides.\"}},\n    {\"@type\": \"Question\", \"name\": \"Can the 51817 be ordered alongside other TrippNT MRI products in the same institutional transaction?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The 51817, 51728 MRI Core DX, and 54038 MRI Compact Cart are all on the same institutional pricing program. Volume discounts apply at checkout. All three can be included in a single institutional order.\"}}\n  ]\n}\n\u003c\/script\u003e","brand":"TrippNT","offers":[{"title":"Default Title","offer_id":48529631707368,"sku":"51817","price":2237.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/5B51817_5D_20MRI_20Core_20DX_20Extend_20Top_20with_20Sliding_20Door.jpg?v=1778340794","url":"https:\/\/labsupplies.com\/products\/trippnt-51817-mri-core-dx-extended-top-sliding-door","provider":"LabSupplies.com","version":"1.0","type":"link"}