{"product_id":"trippnt-51283-stainless-steel-dual-dispensing-paper-towel-holder","title":"TrippNT Stainless Steel Dual Dispensing Paper Towel Holder | Top \u0026 Bottom Access SS Dispenser 51283","description":"\u003ch2\u003eTechnical Narrative\u003c\/h2\u003e\n\u003cp\u003eThe TrippNT 51283 Stainless Steel Dual Dispensing Paper Towel Holder replaces polymer paper towel dispensers at wall positions where aggressive cleaning protocols — sporicidal bleach, hydrogen peroxide vapor, or high-concentration quaternary ammonium compounds — would degrade, discolor, or embrittle a PETG or PVC unit over time. The brushed stainless steel construction is inherently corrosion-resistant to all standard laboratory and clinical disinfectants and maintains its surface integrity indefinitely in environments where wipe-down frequency is daily or higher. The dual dispensing design provides two separate access points for the same stack of 150-count Z-, C-, or multifold paper towels: the open top allows pulling from above when the holder is at or above counter height; the angled front slot allows dispensing from below when the holder is wall-mounted at standard height — both access points operate simultaneously without any adjustment or mode switching.\u003c\/p\u003e\n\u003cp\u003eAt 10\u0026amp;frac78; × 6½ × 4¼″ (W × H × D) and 1.7 lb, the 51283 mounts to any wall substrate via keyhole hardware — included — in minutes. The unit ships fully assembled. For environments where polymer construction is acceptable and stainless aesthetics are not required, TrippNT’s clear PETG dual dispensing holders provide the same dual-access design in a lighter, lower-cost format. The 51283 is the correct specification when the cleaning protocol, aesthetic standard, or facility policy mandates metal construction at paper towel dispensing positions.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless Steel (Brushed)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColor \/ Finish\u003c\/td\u003e\n\u003ctd\u003eBrushed Stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e150-count single stack Z, C, or multifold paper towels\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDispensing\u003c\/td\u003e\n\u003ctd\u003eDual — Open Top + Angled Front Slot (bottom)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMount Type\u003c\/td\u003e\n\u003ctd\u003eKeyhole Wall Mount (hardware included)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Dimensions (W × H × D)\u003c\/td\u003e\n\u003ctd\u003e10\u0026amp;frac78; × 6½ × 4¼″\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Weight\u003c\/td\u003e\n\u003ctd\u003e1.7 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping Carton\u003c\/td\u003e\n\u003ctd\u003e12 × 12 × 6 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e4 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e692041659752\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHTS Code\u003c\/td\u003e\n\u003ctd\u003e3926.9\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States — Kansas City, MO\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLaboratory and Clinical Applications\u003c\/h2\u003e\n\u003cp\u003eThe TrippNT 51283 is specified at wall positions requiring stainless steel construction for paper towel dispensing, including hospital operating room and sterile processing unit walls subject to sporicidal cleaning protocols, pharmaceutical GMP clean room paper towel stations requiring metal-compatible construction, BSL-3 laboratory paper towel positions subject to aggressive decontamination, industrial manufacturing clean room metal-surface-requirement paper towel holders, hospital central supply and sterile processing wall positions, food-grade production area metal-only supply holder programs, dental surgical operatory stainless surface programs, veterinary surgical suite wall paper towel positions, and any facility position where cleaning protocol, aesthetic standard, or institutional policy requires stainless steel paper towel holder construction rather than polymer alternatives.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.trippnt.com\/shop\/51283-stainless-steel-dual-dispensing-paper-towel-holder-1101\/document\/1081\" target=\"_blank\" rel=\"noopener\"\u003eSales Sheet — TrippNT 51283 Stainless Steel Dual Dispensing Paper Towel Holder (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMade in the U.S.A. \u0026amp; Lifetime Guarantee\u003c\/h2\u003e\n\u003cp\u003eProudly manufactured in the United States by TrippNT. This paper towel holder is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your laboratory. Institutional pricing and bulk discounts are available for universities, hospital systems, and government agencies.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat paper towel formats fit the 51283, and how does the dual dispensing work for different user height and mounting height configurations?\u003c\/h3\u003e\n\u003cp\u003eThe 51283 holds 150-count single-stack Z-fold, C-fold, and multifold paper towels — the three standard formats used in laboratory and clinical environments. The open top provides direct pull access for users at counter height or taller, while the angled front slot at the base of the unit allows users to pull towels from the front when the holder is mounted at standard wall height (typically 48–54 inches from the floor). Both access points operate from the same towel stack simultaneously — there is no mode selection or position adjustment required. The unit does not require a separate loading procedure: towels are loaded from the top or bottom when the stack runs low.\u003c\/p\u003e\n\u003ch3\u003eWhat is the institutional pricing structure for the 51283, and are TrippNT’s clear PETG dual dispensing holders available on the same program for mixed-material programs?\u003c\/h3\u003e\n\u003cp\u003eLabSupplies.com provides tiered institutional pricing for hospitals, pharmaceutical manufacturers, CROs, academic research institutions, and government agencies. Volume discounts apply at checkout by quantity. The 51283 stainless steel holder and TrippNT’s clear PETG dual dispensing variants are available on the same institutional pricing program — facilities deploying stainless holders in high-acuity decontamination zones alongside PETG holders in lower-protocol zones can source both from one institutional order.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"Product\",\n  \"name\": \"TrippNT Stainless Steel Dual Dispensing Paper Towel Holder\",\n  \"image\": [\n    \"https:\/\/www.trippnt.com\/web\/image\/product.product\/1011\/image_1024\/%5B51283%5D%20Stainless%20Steel%20Dual%20Dispensing%20Paper%20Towel%20Holder?unique=cdd59e0\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/282\/image_1024\/51283.2.webp?unique=908ec45\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/1416\/image_1024\/DWG%20-%2051283.1%20-%20Rev%202.webp?unique=abfd1e0\"\n  ],\n  \"description\": \"TrippNT 51283 Stainless Steel Dual Dispensing Paper Towel Holder. Brushed stainless, dual access (open top + angled front slot), holds 150-count Z\/C\/multifold, keyhole wall mount with hardware, 10 7\/8 x 6 1\/2 x 4 1\/4 inches (WHD), 1.7 lb. USA-made. Lifetime Guarantee.\",\n  \"sku\": \"51283\",\n  \"gtin12\": \"692041659752\",\n  \"brand\": {\"@type\": \"Brand\", \"name\": \"TrippNT\"},\n  \"manufacturer\": {\"@type\": \"Organization\", \"name\": \"TrippNT\", \"address\": {\"@type\": \"PostalAddress\", \"streetAddress\": \"10991 N Airworld Drive\", \"addressLocality\": \"Kansas City\", \"addressRegion\": \"MO\", \"postalCode\": \"64153\", \"addressCountry\": \"US\"}},\n  \"countryOfOrigin\": \"US\",\n  \"material\": \"Stainless Steel\",\n  \"weight\": {\"@type\": \"QuantitativeValue\", \"value\": 1.7, \"unitCode\": \"LBR\"},\n  \"offers\": {\"@type\": \"Offer\", \"priceCurrency\": \"USD\", \"price\": \"93.18\", \"availability\": \"https:\/\/schema.org\/InStock\", \"seller\": {\"@type\": \"Organization\", \"name\": \"LabSupplies.com\"}},\n  \"warranty\": {\"@type\": \"WarrantyPromise\", \"durationOfWarranty\": {\"@type\": \"QuantitativeValue\", \"value\": \"Lifetime\"}}\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\"@type\": \"Question\", \"name\": \"What paper towel formats fit the 51283, and how does the dual dispensing work for different user height and mounting height configurations?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The 51283 holds 150-count Z-fold, C-fold, and multifold paper towels. The open top provides direct pull for users at counter height; the angled front slot allows front dispensing at standard wall-mount height. Both access points operate from the same towel stack simultaneously with no mode selection. Loading is from the top or bottom when the stack runs low.\"}},\n    {\"@type\": \"Question\", \"name\": \"What is the institutional pricing structure for the 51283, and are PETG dual dispensing holders available on the same program?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"LabSupplies.com provides tiered institutional pricing for hospitals, pharmaceutical manufacturers, CROs, and government agencies. Volume discounts apply at checkout. The 51283 stainless and TrippNT's clear PETG dual dispensing variants are on the same institutional pricing program — facilities can source both in one institutional order.\"}}\n  ]\n}\n\u003c\/script\u003e","brand":"TrippNT","offers":[{"title":"Default Title","offer_id":48520760918248,"sku":"51283","price":93.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/5B51283_5D_20Stainless_20Steel_20Dual_20Dispensing_20Paper_20Towel_20Holder.jpg?v=1778161424","url":"https:\/\/labsupplies.com\/products\/trippnt-51283-stainless-steel-dual-dispensing-paper-towel-holder","provider":"LabSupplies.com","version":"1.0","type":"link"}