{"product_id":"trippnt-50481-glove-box-kimwipe-holder-magnet-mount","title":"TrippNT Vertical Glove Box \u0026 Kimwipe Holder Magnet Mount | 2-in-1 Fume Hood Supply Station 50481","description":"\u003ch2\u003eTechnical Narrative\u003c\/h2\u003e\n\u003cp\u003eThe TrippNT 50481 Vertical Glove Box and Kimwipe Holder with Magnet Mount solves the two-unit mounting problem at fume hood side panels and biosafety cabinet exteriors: when both a glove box and a Kimwipe dispenser are required at the same position, facilities are forced to either install two separate magnetic holders — two mounting contacts, two wall footprints, two units to clean — or go without one of the two supplies. The 50481 eliminates that tradeoff with a single 5¾ × 31¼ × 4½″ (W × H × D) vertical unit that stacks a front-dispensing glove box position over a rectangular tension-grip wiper position, both sharing one magnetic backing, one mounting point, and one 2.5 lb unit to manage and decontaminate.\u003c\/p\u003e\n\u003cp\u003eConstructed from ¼″ white PVC with an integrated magnetic backing, the 50481 adheres to any ferrous metal surface — fume hood sashes, BSC exterior housings, steel cart side rails, steel casework doors — and repositions tool-free without screw penetration or surface damage. The wiper section is compatible with Kimwipes Kimberly-Clark XL Wipers Part No. 34155, Accuwipe Part No. 29712, and Shur Wipe Wipers Part No. 29712. The glove box section accepts standard glove boxes in XS through XL. The 31¼″ height accommodates both sections vertically in the side panel space that is typically available alongside a full-height fume hood sash or BSC door. IPA- and bleach-compatible PVC construction satisfies USP \u0026lt;797\u0026gt;\/\u0026lt;800\u0026gt; and GLP decontamination requirements. Ships fully assembled.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e¼″ PVC with Magnet Backing\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColor \/ Finish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e1 glove box + 1 large wiper box (stacked vertical)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompartments\u003c\/td\u003e\n\u003ctd\u003e2 (1 glove box position + 1 wiper position)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMount Type\u003c\/td\u003e\n\u003ctd\u003eMagnetic (ferrous metal surfaces)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLoading Style\u003c\/td\u003e\n\u003ctd\u003eFront-Dispensing (gloves) + Tension Front-Dispensing (wipers)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatible Wipers\u003c\/td\u003e\n\u003ctd\u003eKimwipes KC XL No. 34155 \/ Accuwipe No. 29712 \/ Shur Wipe No. 29712\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Dimensions (W × H × D)\u003c\/td\u003e\n\u003ctd\u003e5¾ × 31¼ × 4½″\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Weight\u003c\/td\u003e\n\u003ctd\u003e2.5 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping Carton\u003c\/td\u003e\n\u003ctd\u003e10 × 12 × 35 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e6 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e692041659394\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHTS Code\u003c\/td\u003e\n\u003ctd\u003e3926.9\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States — Kansas City, MO\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLaboratory and Clinical Applications\u003c\/h2\u003e\n\u003cp\u003eThe TrippNT 50481 is specified wherever a single magnetic mounting point must simultaneously stage both gloves and wipers, including fume hood side panels requiring co-located glove and wiper access for analytical and organic chemistry work, biosafety cabinet exterior housings in BSL-2 laboratories where both supplies are consumed at every session, sterile compounding anteroom BSC positions operating under USP \u0026lt;797\u0026gt;\/\u0026lt;800\u0026gt;, steel lab cart side rails in mobile procedure carts requiring combined glove and wiper staging, hospital procedure cart side panels for combined supply access, cleanroom gowning anteroom positions where both supplies are dispensed at the same station, dental operatory metal cabinet positions, veterinary clinic stainless steel exam area combined supply stations, and any position where real estate constraints make two separate magnetic holders operationally impractical and a single combination unit is the correct specification.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.trippnt.com\/shop\/50481-glove-box-wipe-holder-w-magnet-mount-991\/document\/1069\" target=\"_blank\" rel=\"noopener\"\u003eSales Sheet — TrippNT 50481 Glove Box \u0026amp; Wipe Holder with Magnet Mount (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMade in the U.S.A. \u0026amp; Lifetime Guarantee\u003c\/h2\u003e\n\u003cp\u003eProudly manufactured in the United States by TrippNT. This combination holder is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your laboratory. Institutional pricing and bulk discounts are available for universities, hospital systems, and government agencies.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the clearance required to mount the 50481 on a fume hood side panel, and does the 31¼″ height fit standard fume hood sash heights?\u003c\/h3\u003e\n\u003cp\u003eThe 50481 requires 31¼″ of continuous vertical ferrous metal surface for full mounting. Standard fume hood side panels on 4-foot and 6-foot hoods typically provide 28–36″ of usable side panel height depending on the model — the 50481 fits within this range on most major hood lines. For BSC exteriors, the side panel height is typically 24–30″; on units at the lower end of this range, mounting the 50481 may require positioning it slightly above the base of the side panel to stay within the ferrous surface area. Verify the available continuous metal surface height on your specific hood or BSC model before ordering. The magnetic backing mounts and repositions tool-free, so fit adjustments require no additional hardware.\u003c\/p\u003e\n\u003ch3\u003eWhat is the institutional pricing structure for volume orders of the TrippNT 50481?\u003c\/h3\u003e\n\u003cp\u003eLabSupplies.com provides tiered institutional pricing for universities, hospital systems, federal agencies, and government laboratories. Volume discounts apply at checkout by quantity. For facilities specifying the 50481 alongside separate glove-only (side-loading series) or wiper-only (50282) magnetic holders as part of a comprehensive fume hood and BSC supply standardization program, our B2B team can assist with multi-SKU quantity planning and coordinated pricing.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"Product\",\n  \"name\": \"TrippNT Glove Box and Kimwipe Holder with Magnet Mount\",\n  \"image\": [\n    \"https:\/\/www.trippnt.com\/web\/image\/product.product\/901\/image_1024\/%5B50481%5D%20Glove%20Box%20%26%20Wipe%20Holder%20w-%20Magnet%20Mount?unique=b1ed07b\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/591\/image_1024\/50481.2.webp?unique=7f0fbf2\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/1299\/image_1024\/DWG%20-%2050481.1%20-%20Rev%208.webp?unique=093a032\"\n  ],\n  \"description\": \"TrippNT 50481 Vertical Glove Box and Kimwipe Holder with Magnet Mount. 1\/4-inch white PVC, 1 glove box + 1 wiper position stacked vertically, magnetic backing, 5 3\/4 x 31 1\/4 x 4 1\/2 inches (WHD), 2.5 lb. USA-made. Lifetime Guarantee.\",\n  \"sku\": \"50481\",\n  \"gtin12\": \"692041659394\",\n  \"brand\": {\"@type\": \"Brand\", \"name\": \"TrippNT\"},\n  \"manufacturer\": {\"@type\": \"Organization\", \"name\": \"TrippNT\", \"address\": {\"@type\": \"PostalAddress\", \"streetAddress\": \"10991 N Airworld Drive\", \"addressLocality\": \"Kansas City\", \"addressRegion\": \"MO\", \"postalCode\": \"64153\", \"addressCountry\": \"US\"}},\n  \"countryOfOrigin\": \"US\",\n  \"material\": \"1\/4-inch PVC with Magnet Backing\",\n  \"weight\": {\"@type\": \"QuantitativeValue\", \"value\": 2.5, \"unitCode\": \"LBR\"},\n  \"offers\": {\"@type\": \"Offer\", \"priceCurrency\": \"USD\", \"price\": \"142.58\", \"availability\": \"https:\/\/schema.org\/InStock\", \"seller\": {\"@type\": \"Organization\", \"name\": \"LabSupplies.com\"}},\n  \"warranty\": {\"@type\": \"WarrantyPromise\", \"durationOfWarranty\": {\"@type\": \"QuantitativeValue\", \"value\": \"Lifetime\"}}\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\"@type\": \"Question\", \"name\": \"What is the clearance required to mount the 50481 on a fume hood side panel, and does the 31 1\/4-inch height fit standard fume hood sash heights?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The 50481 requires 31 1\/4 inches of continuous vertical ferrous metal surface. Standard fume hood side panels on 4-foot and 6-foot hoods typically provide 28-36 inches of usable height, accommodating the 50481 on most major hood lines. For BSC exteriors with shorter panels (24-30 inches), position the unit slightly above the base to stay within the ferrous surface. The magnetic backing repositions tool-free for fit adjustments.\"}},\n    {\"@type\": \"Question\", \"name\": \"What is the institutional pricing structure for volume orders of the TrippNT 50481?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"LabSupplies.com provides tiered institutional pricing for universities, hospital systems, federal agencies, and government laboratories. Volume discounts apply at checkout. For programs specifying the 50481 alongside separate glove-only or wiper-only magnetic holders as part of a fume hood and BSC supply standardization program, our B2B team can assist with multi-SKU quantity planning.\"}}\n  ]\n}\n\u003c\/script\u003e","brand":"TrippNT","offers":[{"title":"Default Title","offer_id":48502573105384,"sku":"50481","price":142.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/5B50481_5D_20Glove_20Box_20_26_20Wipe_20Holder_20w-_20Magnet_20Mount.webp?v=1778105433","url":"https:\/\/labsupplies.com\/products\/trippnt-50481-glove-box-kimwipe-holder-magnet-mount","provider":"LabSupplies.com","version":"1.0","type":"link"}