{"product_id":"trippnt-3-in-1-large-acrylic-apparel-dispenser-50127","title":"TrippNT 3-in-1 Large Acrylic Apparel Dispenser | 3-Bay PPE Dispenser for Gowning Rooms 50127","description":"\u003ch2\u003eTrippNT 3-in-1 Large Acrylic Apparel Dispenser — Three-Compartment Dust-Protected Wall-Mount Dispenser for Full-Spectrum Gowning Room PPE Staging\u003c\/h2\u003e\n\u003cp\u003eThe TrippNT 3-in-1 Large Acrylic Apparel Dispenser (SKU 50127) is the three-bay configuration in TrippNT’s large apparel dispenser family, designed for gowning rooms, controlled environment entry vestibules, and compliance-critical point-of-use PPE staging locations that require three distinct apparel categories dispensed from a single wall position. At 20″ W × 18\u0026amp;frac38;″ H × 9″ D with three equal large compartments (each approximately 6¼″ wide), the 50127 accommodates the three-item gowning sequence most commonly required in pharmaceutical manufacturing (hairnet + beard cover + bootie), food processing (hairnet + glove + bootie), medical device manufacturing (cap + glove + bootie), and hospital OR gowning corridors (cap + mask + shoe cover). Each bay holds a standard apparel dispenser pouch (500-count hairnets, 100-pair booties, or equivalent folded-stack apparel) with room to spare. The hinged top lid covers all three compartments simultaneously during storage periods, providing the FIFO-compatible dust barrier that GMP and HACCP apparel-staging programs require. Total weight capacity is 15 lbs (5 lbs per bay), rated by TrippNT for the maximum apparel load of three fully-stocked standard dispenser bags.\u003c\/p\u003e\n\u003cp\u003eConstruction is white PVC and 3\/16-inch clear acrylic. The clear acrylic front panels allow all three bay stock levels to be verified in a single glance during gowning room inspection rounds — without opening the lid. Bottom dispensing slots on each bay provide one-at-a-time controlled apparel release that avoids hand contamination of the remaining stock. The keyhole back panel with included mounting hardware supports installation on painted drywall, stainless steel cleanroom panels, FRP gowning room wallboard, and epoxy-coated block wall. Ships fully assembled. For facilities needing only two apparel categories at the same position, the 50101 2-in-1 (processed in LS Batch 03) is the correct configuration. For single-category high-capacity staging, the 50151 Medium Apparel Dispenser (this batch) covers that use case.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eWhite PVC and 3\/16″ Clear Acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColor \/ Finish\u003c\/td\u003e\n\u003ctd\u003eWhite body, clear front panels\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompartments\u003c\/td\u003e\n\u003ctd\u003e3 equal large compartments (approx. 6¼″ usable width each)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTotal Weight Capacity\u003c\/td\u003e\n\u003ctd\u003e15 lbs (5 lbs per bay)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLid\u003c\/td\u003e\n\u003ctd\u003eHinged top lid (dust-protecting, top-loading)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDispensing\u003c\/td\u003e\n\u003ctd\u003eBottom slot per bay (FIFO rotation)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMount Type\u003c\/td\u003e\n\u003ctd\u003eKeyhole wall mount — \u003cstrong\u003ehardware included\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Dimensions (W × H × D)\u003c\/td\u003e\n\u003ctd\u003e20″ × 18\u0026amp;frac38;″ × 9″\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Weight\u003c\/td\u003e\n\u003ctd\u003e8.8 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping Carton (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e27″ × 13″ × 23″\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e11 lb (Ground)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e692041660727\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHTS Code\u003c\/td\u003e\n\u003ctd\u003e3926.9\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States (Kansas City, MO)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLaboratory and Clinical Applications\u003c\/h2\u003e\n\u003cp\u003eThe TrippNT 50127 is the primary specification for three-category apparel dispensing in: pharmaceutical GMP manufacturing gowning rooms (21 CFR Part 211.68, EU GMP Annex 1, ISO 14644), USP \u0026lt;797\u0026gt;\/\u0026lt;800\u0026gt; sterile compounding ante-rooms (three-item gowning protocol), food and beverage production gowning vestibules (HACCP, FSMA, SQF compliance), medical device manufacturing ISO 5–8 gowning areas, hospital OR and surgical suite gowning corridors, contract manufacturing organization (CMO) and CRO entry compliance stations, USDA-inspected processing facility gowning points, semiconductor fab cleanroom gowning vestibules, dental group practice gowning compliance stations, academic research BSL-2 and BSL-3 laboratory gowning entry points, and visitor management programs requiring three apparel items at a single wall station. Also used in food service commissary gowning areas and health inspected food-processing facilities meeting state and federal PPE compliance requirements.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.trippnt.com\/shop\/50127-3-in-1-large-acrylic-apparel-dispenser-879\/document\/906\" target=\"_blank\" rel=\"noopener\"\u003eSales Sheet — 50127 3-in-1 Large Acrylic Apparel Dispenser (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMade in the U.S.A. \u0026amp; Lifetime Guarantee\u003c\/h2\u003e\n\u003cp\u003eProudly manufactured in the United States by TrippNT. This apparel dispenser is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your laboratory. Institutional pricing and bulk discounts are available for universities, hospital systems, and government agencies.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhen should I specify the 50127 (3 bays) versus the 50101 (2 bays)?\u003c\/h3\u003e\n\u003cp\u003eThe correct specification depends on how many distinct apparel categories your gowning protocol requires at the same wall station. Most pharmaceutical and food manufacturing gowning programs require three items (hairnet + beard cover\/mask + bootie or shoe cover) — the 50127 is the standard choice for these environments. Two-item programs (hairnet + bootie, or cap + glove) are well served by the 50101 at a lower cost and smaller profile. A practical rule: count the number of apparel items a person must don before passing through the gowning entry point, and match the dispenser bay count to that number. If a fourth item is required (e.g., hairnet + beard cover + glove + bootie), two dispensers (50101 + 50127 side by side, or two 50101 units) are the correct approach, as TrippNT does not make a 4-bay version in this format.\u003c\/p\u003e\n\u003ch3\u003eWhat are the internal bay dimensions, and what apparel packages fit?\u003c\/h3\u003e\n\u003cp\u003eEach of the three bays is approximately 6¼″ wide × 17½″ tall × 8¾″ deep. Items that fit comfortably per bay: standard 500-count hairnet dispenser bag (typically 5″ wide × 7″ tall packaged), standard 100-pair bootie\/shoe cover stack (approximately 5½″ wide × 5″ tall folded), standard 100-count beard cover stack, standard 50-count disposable gown folded stack. For larger apparel items like coveralls or bouffant caps (6″+ folded width), confirm the folded dimensions fit within the 6¼″ bay width before ordering.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"Product\",\n  \"name\": \"TrippNT 3-in-1 Large Acrylic Apparel Dispenser\",\n  \"image\": [\n    \"https:\/\/www.trippnt.com\/web\/image\/product.product\/789\/image_1024\/%5B50127%5D%203-in-1%20Large%20Acrylic%20Apparel%20Dispenser?unique=cea5095\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/1258\/image_1024\/DWG%20-%2050127.1%20-%20Rev%207.webp?unique=7982e52\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/2362\/image_1024\/3-in-1%20Large%20Acrylic%20Apparel%20Dispenser?unique=cea5095\"\n  ],\n  \"description\": \"TrippNT 50127 large 3-compartment apparel dispenser. 20 x 18 inches, 15 lb capacity — stores hairnets, booties, gowns in 3 bays; hinged lid, bottom slot, keyhole mount. Made in USA. Lifetime Guarantee.\",\n  \"sku\": \"50127\",\"gtin12\": \"692041660727\",\n  \"brand\": {\"@type\": \"Brand\",\"name\": \"TrippNT\"},\n  \"manufacturer\": {\"@type\": \"Organization\",\"name\": \"TrippNT\",\"address\": {\"@type\": \"PostalAddress\",\"addressLocality\": \"Kansas City\",\"addressRegion\": \"MO\",\"addressCountry\": \"US\"}},\n  \"countryOfOrigin\": \"US\",\"material\": \"White PVC and Clear Acrylic\",\n  \"weight\": {\"@type\": \"QuantitativeValue\",\"value\": \"8.8\",\"unitCode\": \"LBR\"},\n  \"offers\": {\"@type\": \"Offer\",\"priceCurrency\": \"USD\",\"price\": \"427.01\",\"availability\": \"https:\/\/schema.org\/InStock\",\"itemCondition\": \"https:\/\/schema.org\/NewCondition\",\"warranty\": \"Lifetime\"}\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\"@type\": \"Question\",\"name\": \"When should I specify the 50127 (3 bays) versus the 50101 (2 bays)?\",\n     \"acceptedAnswer\": {\"@type\": \"Answer\",\"text\": \"Match the bay count to the number of apparel items required at the gowning entry point. Three-item programs (hairnet + beard cover + bootie) use the 50127. Two-item programs (hairnet + bootie, or cap + glove) use the 50101 at lower cost. For four-item protocols, two dispensers side-by-side is the correct approach as a 4-bay version is not available.\"}},\n    {\"@type\": \"Question\",\"name\": \"What are the internal bay dimensions?\",\n     \"acceptedAnswer\": {\"@type\": \"Answer\",\"text\": \"Each bay is approximately 6.25 inches wide by 17.5 inches tall by 8.75 inches deep. Standard hairnet bags (500-count, 5 inches wide), bootie stacks (100-pair, 5.5 inches wide), and beard cover stacks all fit comfortably. Confirm folded dimensions are within 6.25 inches wide for larger apparel items before ordering.\"}}\n  ]\n}\n\u003c\/script\u003e","brand":"TrippNT","offers":[{"title":"Default Title","offer_id":48500916748520,"sku":"50127","price":427.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/5B50127_5D_203-in-1_20Large_20Acrylic_20Apparel_20Dispenser.jpg?v=1778091728","url":"https:\/\/labsupplies.com\/products\/trippnt-3-in-1-large-acrylic-apparel-dispenser-50127","provider":"LabSupplies.com","version":"1.0","type":"link"}