{"product_id":"trippnt-2-in-1-large-acrylic-apparel-dispenser-50101","title":"TrippNT 2-in-1 Large Acrylic Apparel Dispenser | Hairnet Bootie Gown PPE Dispenser 50101","description":"\u003ch2\u003eTrippNT 2-in-1 Large Acrylic Apparel Dispenser — Dust-Protected Dual-Compartment Wall-Mount Dispenser for Hairnets, Booties, Gowns, and Cleanroom PPE\u003c\/h2\u003e\n\u003cp\u003eThe TrippNT 2-in-1 Large Acrylic Apparel Dispenser (SKU 50101) is a high-capacity, dust-protected wall-mount dispenser engineered for controlled environments and compliance-driven workplaces where single-use protective apparel must be staged at point-of-entry in conditions that prevent external contamination of the apparel itself before use. At 20″ W × 18\u0026amp;frac38;″ H × 9″ D with two equal large compartments, the 50101 provides approximately 9½″ of usable width per compartment — sufficient for hairnets, booties\/shoe covers, beard covers, finger cots, disposable gowns, and coveralls staged as individual dispense units or small folded stacks. The hinged top lid allows top-loading without removing the dispenser from the wall; the bottom dispensing slot ensures FIFO (first-in, first-out) apparel rotation that prevents bottom-stack items from aging in place. The white PVC and clear 3\/16-inch acrylic construction provides all-sides transparency for at-a-glance inventory checks during gowning room rounds, without opening the dispenser and creating a contamination event.\u003c\/p\u003e\n\u003cp\u003eThe keyhole back panel with included mounting hardware supports installation on painted drywall, stainless steel cleanroom panels, FRP (fiber reinforced plastic) gowning room wall board, and painted block wall — the primary surface types in pharmaceutical manufacturing, food processing, and hospital gowning areas. Once mounted, the dispenser weight-loads to the keyholes and can be lifted off for periodic sanitization with IPA or quaternary ammonium compounds compatible with PVC and acrylic surfaces. For facilities needing a third apparel category staged at the same wall position (e.g., hairnet + beard cover + bootie), the sibling 50127 3-in-1 (RAYNEU session scope) is the correct specification. Ships fully assembled.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial (Body)\u003c\/td\u003e\n\u003ctd\u003eWhite PVC and 3\/16″ Clear Acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColor \/ Finish\u003c\/td\u003e\n\u003ctd\u003eWhite body, clear front panels\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompartments\u003c\/td\u003e\n\u003ctd\u003e2 large equal compartments (approx. 9½″ usable width each)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLid\u003c\/td\u003e\n\u003ctd\u003eHinged top lid (dust-protecting, top-loading refill)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDispensing\u003c\/td\u003e\n\u003ctd\u003eBottom slot (FIFO rotation)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMount Type\u003c\/td\u003e\n\u003ctd\u003eKeyhole wall mount — \u003cstrong\u003ehardware included\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Dimensions (W × H × D)\u003c\/td\u003e\n\u003ctd\u003e20″ × 18\u0026amp;frac38;″ × 9″\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Weight\u003c\/td\u003e\n\u003ctd\u003e7.7 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping Carton (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e27″ × 13″ × 23″\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e11 lb (Ground)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e692041660697\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHTS Code\u003c\/td\u003e\n\u003ctd\u003e3926.9\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States (Kansas City, MO)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eLaboratory and Clinical Applications\u003c\/h2\u003e\n\u003cp\u003eThe TrippNT 50101 is specified for apparel dispensing in: pharmaceutical manufacturing gowning rooms (21 CFR Part 211, EU GMP Annex 1, ISO 14644 compliance staging), USP \u0026lt;797\u0026gt; and \u0026lt;800\u0026gt; sterile compounding ante-rooms (hairnet and gown staging), food and beverage production gowning areas (HACCP and FSMA compliance), medical device manufacturing cleanrooms (ISO 5–8 gowning vestibules), hospital surgical suite gowning corridors (hairnet, beard cover, and bootie pre-staging), laboratory entry vestibules (visitor PPE staging for BSL-2 and BSL-3 areas), dental lab and dental operatory gowning points, contract research organization (CRO) and biotech entry compliance staging, USDA-inspected meat and poultry production lines, semiconductor fab cleanroom gowning areas, and school laboratory safety PPE dispensing points. The 50101 is also widely specified for visitor management programs where two categories of entry PPE must be provided (e.g., hairnet + shoe cover) from a single wall-mounted station.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.trippnt.com\/shop\/50101-2-in-1-large-acrylic-apparel-dispenser-875\/document\/899\" target=\"_blank\" rel=\"noopener\"\u003eSales Sheet — 50101 2-in-1 Large Acrylic Apparel Dispenser (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMade in the U.S.A. \u0026amp; Lifetime Guarantee\u003c\/h2\u003e\n\u003cp\u003eProudly manufactured in the United States by TrippNT. This apparel dispenser is backed by a 100% Lifetime Guarantee, ensuring it is a permanent asset for your laboratory. Institutional pricing and bulk discounts are available for universities, hospital systems, and government agencies.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow does the hinged lid design prevent PPE contamination compared to open-top dispensers?\u003c\/h3\u003e\n\u003cp\u003eOpen-top apparel dispensers expose the top layer of staged apparel to airborne particulates, HVAC supply air carrying viable and non-viable particles, and physical contamination from people leaning over or reaching across the staging area. The 50101’s hinged lid creates a sealed dust barrier over the apparel stack when closed; the lid only opens during top-loading refill events and then re-seals automatically. In pharmaceutical GMP environments, this reduces the risk of apparel contamination from open exposure — a documented cGMP observation category during FDA and EU inspections of gowning areas. The bottom dispensing slot provides a one-at-a-time controlled release without requiring users to open the lid or reach into the dispenser, further limiting the exposure window.\u003c\/p\u003e\n\u003ch3\u003eCan this dispenser hold both hairnets and booties in the same unit?\u003c\/h3\u003e\n\u003cp\u003eYes — that is the most common configuration. Each of the two compartments is independently sized to hold a standard hairnet dispenser bag (500-count, approximately 8″ wide × 6″ tall as packaged) or a bootie\/shoe cover stack (typically 100-pair folded, approximately 8″ wide × 5″ tall). The 50101 is ordered most frequently to stage one apparel category per compartment: hairnet (left bay) + bootie or shoe cover (right bay) at gowning room entry. For facilities needing a third category, the 50127 3-in-1 is the correct upgrade.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"Product\",\n  \"name\": \"TrippNT 2-in-1 Large Acrylic Apparel Dispenser\",\n  \"image\": [\n    \"https:\/\/www.trippnt.com\/web\/image\/product.product\/785\/image_1024\/%5B50101%5D%202-in-1%20Large%20Acrylic%20Apparel%20Dispenser?unique=23c3d03\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/1251\/image_1024\/DWG%20-%2050101.1%20-%20Rev%205.webp?unique=2cdd05e\",\n    \"https:\/\/www.trippnt.com\/web\/image\/product.image\/2355\/image_1024\/2-in-1%20Large%20Acrylic%20Apparel%20Dispenser?unique=23c3d03\"\n  ],\n  \"description\": \"TrippNT 50101 large 2-compartment apparel dispenser. Clear acrylic and white PVC, 20 x 18 inches — dust-protecting hinged lid, bottom dispensing slot, keyhole mount with hardware. Stores hairnets, booties, gowns. Made in USA. Lifetime Guarantee.\",\n  \"sku\": \"50101\",\"gtin12\": \"692041660697\",\n  \"brand\": {\"@type\": \"Brand\",\"name\": \"TrippNT\"},\n  \"manufacturer\": {\"@type\": \"Organization\",\"name\": \"TrippNT\",\"address\": {\"@type\": \"PostalAddress\",\"addressLocality\": \"Kansas City\",\"addressRegion\": \"MO\",\"addressCountry\": \"US\"}},\n  \"countryOfOrigin\": \"US\",\"material\": \"White PVC and Clear Acrylic\",\n  \"weight\": {\"@type\": \"QuantitativeValue\",\"value\": \"7.7\",\"unitCode\": \"LBR\"},\n  \"offers\": {\"@type\": \"Offer\",\"priceCurrency\": \"USD\",\"price\": \"344.67\",\"availability\": \"https:\/\/schema.org\/InStock\",\"itemCondition\": \"https:\/\/schema.org\/NewCondition\",\"warranty\": \"Lifetime\"}\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\"@type\": \"Question\",\"name\": \"How does the hinged lid prevent PPE contamination compared to open-top dispensers?\",\n     \"acceptedAnswer\": {\"@type\": \"Answer\",\"text\": \"The hinged lid creates a sealed dust barrier over apparel when closed, only opening during refill events. In GMP pharmaceutical environments, this reduces risk of apparel contamination from open exposure — a documented observation category in FDA and EU gowning area inspections. The bottom dispensing slot provides controlled one-at-a-time release without requiring users to open the lid or reach inside.\"}},\n    {\"@type\": \"Question\",\"name\": \"Can this dispenser hold both hairnets and booties in the same unit?\",\n     \"acceptedAnswer\": {\"@type\": \"Answer\",\"text\": \"Yes — that is the most common configuration. Each of the two compartments holds a standard hairnet dispenser bag (500-count) or a bootie\/shoe cover stack (100-pair folded). The most common order is hairnet (left bay) plus bootie or shoe cover (right bay) at gowning room entry. For a third apparel category, specify the 50127 3-in-1.\"}}\n  ]\n}\n\u003c\/script\u003e","brand":"TrippNT","offers":[{"title":"Default Title","offer_id":48500894335208,"sku":"50101","price":344.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/5B50101_5D_202-in-1_20Large_20Acrylic_20Apparel_20Dispenser.jpg?v=1778091183","url":"https:\/\/labsupplies.com\/products\/trippnt-2-in-1-large-acrylic-apparel-dispenser-50101","provider":"LabSupplies.com","version":"1.0","type":"link"}