{"product_id":"re-202-a-rotary-evaporator-bm-302-a-water-bath-5l-glassware-b-re-202-bwa","title":"Yamato RE202BWA Re-202-A Rotary Evaporator, Bm-302-A Water Bath (5L), Glassware B","description":"\u003ch2\u003eRe-202-A Rotary Evaporator, Bm-302-A Water Bath (5L), Glassware B Overview\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eRE202A Rotary Evaporator with BM302A Water Bath (5L) and Glassware Set B\u003c\/strong\u003e from Yamato Scientific is a complete distillation system supplied by LabSupplies.com, authorized dealer. This rotary evaporator pairs a digital main unit with a 5 L water bath rated from RT +10°C to 90°C, plus a vertical-condenser glassware set for routine solvent recovery.\u003c\/p\u003e\u003cp\u003eSet B uses a space-saving vertical condenser, letting three units fit inside a standard fume hood. A double corrugated-tube condenser delivers 0.143 m² of cooling surface, while the DC brushless simple-servo motor drives rotation from 5 to 315 rpm. Evaporation reaches up to 23 ml\/min, and an auto-inversion mode runs forward or reverse cycling.\u003c\/p\u003e\u003cp\u003ePower is 100–115V, 50\/60 Hz, 1 A with plug, and the unit ships at 90 lbs in a 36 × 36 × 27 in carton. Operating ambient temperature spans 5–35°C. Country of origin is Switzerland (CH). Exterior surfaces use chromium-free electrogalvanized steel with a baked-on finish for durable bench service.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet inversion function:\u003c\/strong\u003e glassware and bath mount on either side, left or right, to suit a technician's dominant hand and the installation location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual spring-loaded jack:\u003c\/strong\u003e stepless height adjustment to a 200 mm maximum lift with one-touch lock for fast flask raising and lowering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital speed control:\u003c\/strong\u003e rotation from 5 to 315 rpm shown on a display with control knob and eight brightness levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree rotation modes:\u003c\/strong\u003e forward, reverse, and auto-inversion cover varied distillation and bumping-prevention needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondenser insulation kit:\u003c\/strong\u003e supplied as standard to suppress condensation forming on the condenser surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayered safety protection:\u003c\/strong\u003e motor overload, over\/low-voltage, speed-sensor-error guards, plus AC adapter short-circuit, overcurrent, and overvoltage protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Choose the Right Rotary Evaporator\u003c\/h2\u003e\u003cp\u003eSelecting a rotary evaporator means matching bath temperature, flask capacity, and site power to your solvent workload. Use the criteria below to confirm this RE202A system fits your process .\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBath temperature range:\u003c\/strong\u003e the BM302A water bath covers RT +10°C to 90°C with ±1.0°C accuracy, suitable for water-compatible solvent recovery; high-boiling solvents may need an oil bath.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlask capacity:\u003c\/strong\u003e the system accepts evaporation flasks of 50–2000 ml and receiving flasks of 100–2000 ml, so confirm your typical batch volume falls in range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl type:\u003c\/strong\u003e a digital speed display with control knob suits labs needing repeatable, readable rotation settings from 5 to 315 rpm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and site power:\u003c\/strong\u003e this unit is 100–115V, 50\/60 Hz; verify your bench circuit before installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootprint:\u003c\/strong\u003e Glassware Set B's vertical condenser is space-saving, letting three units share a standard fume hood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent chemistry:\u003c\/strong\u003e the FKM vacuum seal is standard, with a PTFE seal recommended for ketone or ether solvents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e5 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e115V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRotary evaporator complete system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003eRE-202 main unit + Glassware B + water bath\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlassware Set\u003c\/td\u003e\n\u003ctd\u003eSet B — standard vertical condenser, space-saving (three fit in a standard fume hood)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Ambient Temperature\u003c\/td\u003e\n\u003ctd\u003e5–35°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation Speed Range\u003c\/td\u003e\n\u003ctd\u003e5–315 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEvaporation Capacity\u003c\/td\u003e\n\u003ctd\u003eUp to 23 ml\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation Modes\u003c\/td\u003e\n\u003ctd\u003eForward \/ Reverse \/ Auto-inversion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed Display\u003c\/td\u003e\n\u003ctd\u003eDigital display with control knob (8 brightness levels)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Mechanism\u003c\/td\u003e\n\u003ctd\u003eManual spring-loaded jack — max height 200 mm, stepless, one-touch lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSet Inversion\u003c\/td\u003e\n\u003ctd\u003eGlassware and bath mountable on either side (left or right)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotary Motor\u003c\/td\u003e\n\u003ctd\u003eDC brushless (simple servo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling Condenser\u003c\/td\u003e\n\u003ctd\u003eDouble corrugated tube, 0.143 m² cooling surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Evaporation Flask\u003c\/td\u003e\n\u003ctd\u003e50–2000 ml (optional reducer for smaller flasks)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Receiving Flask\u003c\/td\u003e\n\u003ctd\u003e100–2000 ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVacuum Seal\u003c\/td\u003e\n\u003ctd\u003eFKM standard (PTFE recommended for ketone \/ ether solvents)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety Functions\u003c\/td\u003e\n\u003ctd\u003eMotor overload, over-\/low-voltage and speed-sensor-error protection; AC adapter short-circuit, overcurrent and overvoltage protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBath Type\u003c\/td\u003e\n\u003ctd\u003eWater bath\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBath Model\u003c\/td\u003e\n\u003ctd\u003eBM-302-A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBath Temperature Range\u003c\/td\u003e\n\u003ctd\u003eRT +10°C to 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBath Temperature Accuracy\u003c\/td\u003e\n\u003ctd\u003e±1.0°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBath Capacity\u003c\/td\u003e\n\u003ctd\u003e~5 L (Φ240 × H119 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBath Safety\u003c\/td\u003e\n\u003ctd\u003eAutomatic and independent overheat prevention, temperature upper-limit error, overcurrent fuse; 2A service outlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003e100–115V, 50\/60 Hz, 1 A (with plug)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eExterior: Chromium-free electrogalvanized steel sheet, baked-on finish; Aluminum, baked-on finish\/anodized; Polybutylene terephthalate resin (with fiber glass)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTIN (Barcode)\u003c\/td\u003e\n\u003ctd\u003e797059928019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e90 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e36 × 36 × 27 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent Size\u003c\/td\u003e\n\u003ctd\u003e1 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eAvailable Sizes and Configurations\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRE-202-BWA\u003c\/td\u003e\n\u003ctd\u003eSET\u003c\/td\u003e\n\u003ctd\u003eSET\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eDocumentation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.dropbox.com\/scl\/fi\/2mi3l3vi2zj1iuenlo4l7\/RE-REV-202-212-Product-Brochure.pdf?rlkey=4dtahqhcmi4imgn1jpsk59w1a\u0026amp;dl=0\" target=\"_blank\" rel=\"noopener\"\u003eProduct Brochure\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.yamato-usa.com\/shop\/yamato-mini-rotary-evaporator-for-research-and-development-48?category=29#attr=539\" target=\"_blank\" rel=\"noopener\"\u003eYamato Scientific Official Product Page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMore in This Series\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/re-202-a-rotary-evaporator-bm-302-a-water-bath-5l-glassware-c-re-202-cwa\"\u003eRe-202-A Rotary Evaporator, Bm-302-A Water Bath (5L), Glassware C\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/re-212-a-rotary-evaporator-bm-312-a-water-bath-5l-glassware-b-re-212-bw2a\"\u003eRe-212-A Rotary Evaporator, Bm-312-A Water Bath (5L), Glassware B\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/re-212-a-rotary-evaporator-bm-312-a-water-bath-5l-glassware-c-re-212-cw2a\"\u003eRe-212-A Rotary Evaporator, Bm-312-A Water Bath (5L), Glassware C\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/vacuum-controller-for-re-202-a-212-a-latin-america-countries-dig-vpcm\"\u003eVacuum Controller For Re-202-A\/212-A (Latin America Countries)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/re-202-a-rotary-evaporator-bo-302-a-oil-bath-5l-glassware-b-re-202-boa\"\u003eRe-202-A Rotary Evaporator, Bo-302-A Oil Bath (5L), Glassware B\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/re-202-a-rotary-evaporator-bo-302-a-oil-bath-5l-glassware-c-re-202-coa\"\u003eRe-202-A Rotary Evaporator, Bo-302-A Oil Bath (5L), Glassware C\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/rotary-evaporators-1\"\u003eView all Rotary Evaporators →\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eWhy Buy From LabSupplies.com\u003c\/h2\u003e\u003cp\u003eOrder this Yamato Scientific rotary evaporator system directly from LabSupplies.com and receive a genuine, factory-warranted unit shipped from USA inventory. Our lab-equipment specialists answer spec questions before you commit to a purchase.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthorized Yamato Scientific dealer:\u003c\/strong\u003e every system is a genuine unit backed by the manufacturer warranty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn stock:\u003c\/strong\u003e ready to ship from USA inventory.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecialist support:\u003c\/strong\u003e dedicated lab-equipment staff help confirm configuration and compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the temperature range of the BM302A water bath?\u003c\/h3\u003e\u003cp\u003eThe BM302A water bath operates from RT +10°C to 90°C with ±1.0°C accuracy. It holds approximately 5 L (Φ240 × H119 mm) and includes automatic overheat prevention, a temperature upper-limit error guard, an overcurrent fuse, and a 2A service outlet.\u003c\/p\u003e\n\u003ch3\u003eWhat flask sizes are compatible with the RE202A?\u003c\/h3\u003e\u003cp\u003eThe RE202A accepts evaporation flasks from 50 to 2000 ml and receiving flasks from 100 to 2000 ml. An optional reducer adapts the unit for smaller flasks below the standard range.\u003c\/p\u003e\n\u003ch3\u003eWhat voltage and power does this system require?\u003c\/h3\u003e\u003cp\u003eThis system runs on 100–115V, 50\/60 Hz at 1 A and ships with a plug. Confirm your bench circuit matches before installation.\u003c\/p\u003e\n\u003ch3\u003eWhat rotation speed and evaporation capacity does the unit deliver?\u003c\/h3\u003e\u003cp\u003eRotation ranges from 5 to 315 rpm with evaporation capacity up to 23 ml\/min. The DC brushless simple-servo motor supports forward, reverse, and auto-inversion modes selectable from a digital display.\u003c\/p\u003e\n\u003ch3\u003eWhat materials are used in the construction?\u003c\/h3\u003e\u003cp\u003eThe exterior uses chromium-free electrogalvanized steel sheet with a baked-on finish, aluminum with a baked-on or anodized finish, and polybutylene terephthalate resin with fiberglass. The condenser is a double corrugated tube offering 0.143 m² of cooling surface.\u003c\/p\u003e\n\u003ch3\u003eWhat are the shipping weight and dimensions?\u003c\/h3\u003e\u003cp\u003eThe system weighs 90 lbs and ships in a 36 × 36 × 27 in carton. Country of origin is Switzerland (CH), and the unit is air eligible.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@graph\": [\n    {\n      \"@type\": \"Product\",\n      \"@id\": \"https:\/\/labsupplies.com\/products\/re-202-a-rotary-evaporator-bm-302-a-water-bath-5l-glassware-b-re-202-bwa#product\",\n      \"name\": \"Yamato RE202BWA Re-202-A Rotary Evaporator, Bm-302-A Water Bath (5L), Glassware B\",\n      \"sku\": \"RE-202-BWA\",\n      \"mpn\": \"RE-202-BWA\",\n      \"brand\": {\n        \"@type\": \"Brand\",\n        \"name\": \"Yamato Scientific\"\n      },\n      \"manufacturer\": {\n        \"@type\": \"Organization\",\n        \"name\": \"Yamato Scientific\"\n      },\n      \"url\": \"https:\/\/labsupplies.com\/products\/re-202-a-rotary-evaporator-bm-302-a-water-bath-5l-glassware-b-re-202-bwa\",\n      \"dateModified\": \"2026-06-29\",\n      \"offers\": {\n        \"@type\": \"Offer\",\n        \"priceCurrency\": \"USD\",\n        \"price\": \"2950.00\",\n        \"availability\": \"https:\/\/schema.org\/InStock\",\n        \"url\": \"https:\/\/labsupplies.com\/products\/re-202-a-rotary-evaporator-bm-302-a-water-bath-5l-glassware-b-re-202-bwa\",\n        \"seller\": {\n          \"@type\": \"Organization\",\n          \"name\": \"LabSupplies.com\"\n        }\n      },\n      \"gtin12\": \"797059928019\",\n      \"image\": \"https:\/\/dl.dropboxusercontent.com\/scl\/fo\/02jn6wbbh1yhzaqkcyplw\/h\/RE202B_RE212B.png?rlkey=wtjo5lqeg5sku9a3506qrpssx\",\n      \"description\": \"Yamato RE202A rotary evaporator with BM302A 5L water bath, RT+10–90°C, 5–315 rpm, Glassware Set B. In stock. Authorized Yamato dealer, ships from USA.\"\n    },\n    {\n      \"@type\": \"BreadcrumbList\",\n      \"itemListElement\": [\n        {\n          \"@type\": \"ListItem\",\n          \"position\": 1,\n          \"name\": \"Home\",\n          \"item\": \"https:\/\/labsupplies.com\/\"\n        },\n        {\n          \"@type\": \"ListItem\",\n          \"position\": 2,\n          \"name\": \"Rotary Evaporator\",\n          \"item\": \"https:\/\/labsupplies.com\/collections\/rotary-evaporator\"\n        },\n        {\n          \"@type\": \"ListItem\",\n          \"position\": 3,\n          \"name\": \"Yamato RE202BWA Re-202-A Rotary Evaporator, Bm-302-A Water Bath (5L), Glassware B\",\n          \"item\": \"https:\/\/labsupplies.com\/products\/re-202-a-rotary-evaporator-bm-302-a-water-bath-5l-glassware-b-re-202-bwa\"\n        }\n      ]\n    },\n    {\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What is the temperature range of the BM302A water bath?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The BM302A water bath operates from RT +10°C to 90°C with ±1.0°C accuracy. It holds approximately 5 L (Φ240 × H119 mm) and includes automatic overheat prevention, a temperature upper-limit error guard, an overcurrent fuse, and a 2A service outlet.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What flask sizes are compatible with the RE202A?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The RE202A accepts evaporation flasks from 50 to 2000 ml and receiving flasks from 100 to 2000 ml. An optional reducer adapts the unit for smaller flasks below the standard range.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What voltage and power does this system require?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"This system runs on 100–115V, 50\/60 Hz at 1 A and ships with a plug. Confirm your bench circuit matches before installation.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What rotation speed and evaporation capacity does the unit deliver?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Rotation ranges from 5 to 315 rpm with evaporation capacity up to 23 ml\/min. The DC brushless simple-servo motor supports forward, reverse, and auto-inversion modes selectable from a digital display.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What materials are used in the construction?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The exterior uses chromium-free electrogalvanized steel sheet with a baked-on finish, aluminum with a baked-on or anodized finish, and polybutylene terephthalate resin with fiberglass. The condenser is a double corrugated tube offering 0.143 m² of cooling surface.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What are the shipping weight and dimensions?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The system weighs 90 lbs and ships in a 36 × 36 × 27 in carton. Country of origin is Switzerland (CH), and the unit is air eligible.\"\n          }\n        }\n      ]\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"Yamato Scientific","offers":[{"title":"Default Title","offer_id":48691440943336,"sku":"RE-202-BWA","price":2950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/RE202B_RE212B.png?v=1782676199","url":"https:\/\/labsupplies.com\/products\/re-202-a-rotary-evaporator-bm-302-a-water-bath-5l-glassware-b-re-202-bwa","provider":"LabSupplies.com","version":"1.0","type":"link"}