{"title":"Ironclad Safety \u0026 Work Gloves","description":"\u003ch2\u003eIronclad Laboratory Safety Gloves\u003c\/h2\u003e\n\u003cp\u003eProtect your research and technical staff with heavy-duty hand protection from Ironclad Performance Wear. Engineered for demanding lab environments, these gloves provide essential \u003cstrong\u003eExo-Guard™ impact protection\u003c\/strong\u003e for handling gas cylinders, heavy centrifuges, and bulk reagents. Ensure facility safety without sacrificing the grip needed for precise lab maintenance and equipment calibration.\u003c\/p\u003e","products":[{"product_id":"ironclad-heatworx-reinforced-hw4-heat-resistant-gloves","title":"Ironclad HeatWorx® Reinforced Heat-Resistant Gloves | 450°F Kevlar® ANSI A2 HW4","description":"\u003ch2\u003eIronclad HeatWorx® Reinforced HW4 Gloves Features\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eIronclad HeatWorx® Reinforced HW4 glove\u003c\/strong\u003e delivers intermittent contact-heat protection up to 450°F using a DuPont™ Kevlar® blended shell, inner liner, and stitching. Patented Hotshield® palm technology holds dexterity while adding cut, abrasion, and shrink resistance. An extended gauntlet cuff guards the wrist and lower forearm during hot-handling tasks.\u003c\/p\u003e\n\u003cp\u003eMost heat gloves advertise a temperature but hide the underlying test data, leaving safety officers unable to match the glove to a hazard assessment. This model resolves that gap with documented ANSI\/ASTM F1060 Level 5 heat performance, ANSI 105 A2 cut resistance, and an EN388 3222 mechanical rating. Buyers verify suitability before deployment.\u003c\/p\u003e\n\u003cp\u003eMaintenance stays simple for high-turnover shops. These gloves are oil-repellent, water-repellent, and 100% machine washable, so crews launder rather than discard them. Reinforced Hotshield® zones protect wear points, extending service life across welding, fabrication, and hi-temp automotive cycles.\u003c\/p\u003e\n\u003ch2\u003eAvailable Sizes and Configurations\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHW4-02-S\u003c\/td\u003e\n\u003ctd\u003eSmall\u003c\/td\u003e\n\u003ctd\u003e1 Pair, Gauntlet Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHW4-03-M\u003c\/td\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003e1 Pair, Gauntlet Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHW4-04-L\u003c\/td\u003e\n\u003ctd\u003eLarge\u003c\/td\u003e\n\u003ctd\u003e1 Pair, Gauntlet Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHW4-05-XL\u003c\/td\u003e\n\u003ctd\u003eX-Large\u003c\/td\u003e\n\u003ctd\u003e1 Pair, Gauntlet Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHW4-06-XXL\u003c\/td\u003e\n\u003ctd\u003e2X-Large\u003c\/td\u003e\n\u003ctd\u003e1 Pair, Gauntlet Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eReinforced Heat \u0026amp; Cut Resistant Work Glove\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShell \u0026amp; Liner\u003c\/th\u003e\n\u003ctd\u003eDuPont™ Kevlar® Blended Shell, Stitching \u0026amp; Inner Liner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalm Technology\u003c\/th\u003e\n\u003ctd\u003ePatented Hotshield® Reinforced Palm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat Rating\u003c\/th\u003e\n\u003ctd\u003eUp to 450°F (232°C) Intermittent Contact; ANSI\/ASTM F1060 Level 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut Resistance\u003c\/th\u003e\n\u003ctd\u003eANSI 105 A2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical (EN388)\u003c\/th\u003e\n\u003ctd\u003e3222\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuff\u003c\/th\u003e\n\u003ctd\u003eExtended Gauntlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCare\u003c\/th\u003e\n\u003ctd\u003eOil \u0026amp; Water Repellent; 100% Machine Washable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePatent\u003c\/th\u003e\n\u003ctd\u003eU.S. Patent #D514771\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLaboratory and Industrial Applications\u003c\/h2\u003e\n\u003cp\u003eMaterials labs, foundry assay stations, and pilot-scale fabrication shops use the HW4 for handling heated crucibles, hot stock, and freshly welded assemblies. The Kevlar® liner adds cut protection when manipulating sheet edges or removing parts from furnaces, where bare or single-purpose gloves fail.\u003c\/p\u003e\n\u003cp\u003eMaintenance and QA teams deploy these in hi-temp automotive and equipment-servicing bays. Engine work, exhaust handling, and machinery cool-down inspections all benefit from a glove that resists heat while retaining the dexterity needed for fasteners and small components.\u003c\/p\u003e\n\u003ch2\u003eGlove Comparison: Why Choose Ironclad HeatWorx?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eIronclad HeatWorx via LabSupplies.com\u003c\/th\u003e\n\u003cth\u003eTypical Competitor\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards Disclosure\u003c\/td\u003e\n\u003ctd\u003eF1060 Level 5, ANSI A2, EN388 3222 listed\u003c\/td\u003e\n\u003ctd\u003e\"450°F\" with no test standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment Support\u003c\/td\u003e\n\u003ctd\u003eLinked sizing chart + spec sheet\u003c\/td\u003e\n\u003ctd\u003eNo sizing guidance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume Pricing\u003c\/td\u003e\n\u003ctd\u003eTiered case\/12-pair B2B rates\u003c\/td\u003e\n\u003ctd\u003eSingle-pair retail pricing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstitutional and Volume Pricing\u003c\/h2\u003e\n\u003cp\u003eLabSupplies.com offers tiered procurement pricing on the full HW4 size run for universities, research labs, and industrial crews. Order mixed sizes by the case to standardize PPE across shifts, with net-30 terms for qualified institutions. Contact our B2B desk for crew-quantity and 12-pair pricing.\u003c\/p\u003e\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.globalindustrial.com\/site\/images\/ironclad\/HW4_SS.pdf\"\u003eHW4 HeatWorx Reinforced Spec Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.globalindustrial.com\/site\/images\/ironclad\/glove_sizing_chart.pdf\"\u003eIronclad Glove Sizing Chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs the 450°F rating for continuous or intermittent contact?\u003c\/h3\u003e\n\u003cp\u003eThe 450°F figure reflects intermittent contact heat under ANSI\/ASTM F1060 Level 5. These gloves are not rated for sustained grip on objects at that temperature; use them for brief handling of hot stock.\u003c\/p\u003e\n\u003ch3\u003eWhat cut level do these gloves provide?\u003c\/h3\u003e\n\u003cp\u003eHW4 gloves carry an ANSI 105 A2 cut rating with an EN388 3222 mechanical score, suitable for moderate cut hazards alongside heat exposure in fabrication settings.\u003c\/p\u003e\n\u003ch3\u003eCan these gloves be laundered for reuse?\u003c\/h3\u003e\n\u003cp\u003eYes. The Kevlar® construction is 100% machine washable and oil\/water repellent, allowing repeated cleaning cycles without significant degradation of heat or cut performance.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"Ironclad HeatWorx Reinforced HW4 Heat-Resistant Gloves\",\"image\":\"https:\/\/images.globalindustrial.com\/images\/enlarge\/heatworx_reinforced_HW4.webp\",\"description\":\"450F intermittent contact heat-resistant gloves with DuPont Kevlar blended shell and liner, Hotshield palm, ANSI A2 cut, EN388 3222. Sizes S-XXL.\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Ironclad\"},\"sku\":\"HW4-04-L\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"59.99\",\"availability\":\"https:\/\/schema.org\/InStock\"}}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is the 450F rating for continuous or intermittent contact?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The 450F figure reflects intermittent contact heat under ANSI\/ASTM F1060 Level 5. These gloves are not rated for sustained grip on objects at that temperature; use them for brief handling of hot stock.\"}},{\"@type\":\"Question\",\"name\":\"What cut level do these gloves provide?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"HW4 gloves carry an ANSI 105 A2 cut rating with an EN388 3222 mechanical score, suitable for moderate cut hazards alongside heat exposure in fabrication settings.\"}},{\"@type\":\"Question\",\"name\":\"Can these gloves be laundered for reuse?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The Kevlar construction is 100% machine washable and oil\/water repellent, allowing repeated cleaning cycles without significant degradation of heat or cut performance.\"}}]}\n\u003c\/script\u003e","brand":"Ironclad","offers":[{"title":"Small","offer_id":48621015138536,"sku":"HW4-02-S","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Medium","offer_id":48621015171304,"sku":"HW4-03-M","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":48621015204072,"sku":"HW4-04-L","price":59.99,"currency_code":"USD","in_stock":true},{"title":"X-Large","offer_id":48621015236840,"sku":"HW4-05-XL","price":59.99,"currency_code":"USD","in_stock":true},{"title":"2X-Large","offer_id":48621015269608,"sku":"HW4-06-XXL","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/heatworx_reinforced_HW4.webp?v=1780617240"},{"product_id":"ironclad-general-utility-spandex-gloves-gug","title":"Ironclad General Utility™ Spandex Work Gloves | TPR Knuckle ANSI A2 GUG","description":"\u003ch2\u003eIronclad General Utility™ Spandex Gloves Features\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eIronclad General Utility™ glove\u003c\/strong\u003e is the original high-performance utility glove, built form-fitting to handle day-to-day shop, delivery, and construction tasks. Synthetic leather reinforcements protect critical wear zones, while the patented palm design preserves dexterity for tool and fastener work. A terry-cloth sweat wipe sits on the back of the thumb.\u003c\/p\u003e\n\u003cp\u003eMost utility gloves omit mechanical ratings and use a single fixed cuff that slows donning. This model resolves both gaps with a documented EN388:2003 2132 score and ANSI 105 A2 cut, 3 abrasion ratings. Its hybrid cuff system adds a quick-release safety feature plus a TPR puller for faster, repeatable fitting.\u003c\/p\u003e\n\u003cp\u003eDurability holds up under daily cycling across crews. TPR knuckle protection guards against impact and incidental strikes during rigging and equipment operation. Reinforced palm zones extend service life, lowering replacement frequency for high-volume facilities that issue gloves shift after shift.\u003c\/p\u003e\n\u003ch2\u003eAvailable Sizes and Configurations\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGUG-03-M\u003c\/td\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003e1 Pair, Hybrid Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGUG-04-L\u003c\/td\u003e\n\u003ctd\u003eLarge\u003c\/td\u003e\n\u003ctd\u003e1 Pair, Hybrid Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGUG-05-XL\u003c\/td\u003e\n\u003ctd\u003eX-Large\u003c\/td\u003e\n\u003ctd\u003e1 Pair, Hybrid Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGUG-06-XXL\u003c\/td\u003e\n\u003ctd\u003e2X-Large\u003c\/td\u003e\n\u003ctd\u003e1 Pair, Hybrid Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eGeneral Utility Work Glove\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSpandex Back, Synthetic Leather Palm \u0026amp; Reinforcements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact Protection\u003c\/th\u003e\n\u003ctd\u003eTPR Knuckle Guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut Resistance\u003c\/th\u003e\n\u003ctd\u003eANSI 105 A2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasion\u003c\/th\u003e\n\u003ctd\u003eANSI 105 Level 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical (EN388:2003)\u003c\/th\u003e\n\u003ctd\u003e2132\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuff\u003c\/th\u003e\n\u003ctd\u003eHybrid Quick-Release with TPR Puller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAdded Features\u003c\/th\u003e\n\u003ctd\u003eTerry-Cloth Thumb Sweat Wipe; Patented Palm Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLaboratory and Industrial Applications\u003c\/h2\u003e\n\u003cp\u003eFacilities teams, sample-prep labs, and equipment shops use the General Utility glove as a default-issue glove for handling, clean-up, and material movement. The form fit retains the tactile feel needed for instrument handling and small-parts work without the bulk of heavy-duty leather gloves.\u003c\/p\u003e\n\u003cp\u003eWarehouse, rigging, and delivery crews benefit from the TPR knuckle guard and quick-release cuff during repetitive loading. Yard work, equipment operation, and general construction round out the use profile, making this a single SKU that covers most non-specialized hand-protection needs.\u003c\/p\u003e\n\u003ch2\u003eGlove Comparison: Why Choose Ironclad General Utility?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eIronclad GUG via LabSupplies.com\u003c\/th\u003e\n\u003cth\u003eTypical Competitor\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards Disclosure\u003c\/td\u003e\n\u003ctd\u003eEN388 2132, ANSI A2 cut, Level 3 abrasion listed\u003c\/td\u003e\n\u003ctd\u003e\"Durable\" with no rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDonning Features\u003c\/td\u003e\n\u003ctd\u003eHybrid quick-release cuff + TPR puller\u003c\/td\u003e\n\u003ctd\u003eFixed elastic cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume Pricing\u003c\/td\u003e\n\u003ctd\u003eTiered case\/12-pair B2B rates\u003c\/td\u003e\n\u003ctd\u003eSingle-pair retail pricing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstitutional and Volume Pricing\u003c\/h2\u003e\n\u003cp\u003eLabSupplies.com offers tiered procurement pricing on the full GUG size run for universities, facilities departments, and industrial crews. Order mixed sizes by the case to standardize default-issue PPE across shifts, with net-30 terms for qualified institutions. Contact our B2B desk for crew-quantity and 12-pair pricing.\u003c\/p\u003e\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.globalindustrial.com\/site\/images\/ironclad\/GUG_SS.pdf\"\u003eGeneral Utility GUG Spec Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.globalindustrial.com\/site\/images\/ironclad\/glove_sizing_chart.pdf\"\u003eIronclad Glove Sizing Chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat cut and abrasion protection does this glove provide?\u003c\/h3\u003e\n\u003cp\u003eThe General Utility glove carries an ANSI 105 A2 cut rating with Level 3 abrasion resistance and an EN388:2003 2132 mechanical score, suitable for general handling and moderate-hazard tasks.\u003c\/p\u003e\n\u003ch3\u003eDoes the TPR knuckle guard limit dexterity?\u003c\/h3\u003e\n\u003cp\u003eNo. The patented palm design and spandex back retain high dexterity for tool and fastener work, while the TPR knuckle adds impact protection without stiffening the glove.\u003c\/p\u003e\n\u003ch3\u003eWhat is the hybrid cuff system?\u003c\/h3\u003e\n\u003cp\u003eIt combines a secure adjustable fit with a built-in quick-release safety feature and a TPR cuff puller, letting workers position and remove the glove quickly across repeated cycles.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"Ironclad General Utility Spandex Gloves\",\"image\":\"https:\/\/images.globalindustrial.com\/images\/enlarge\/general_utility_GUG.webp\",\"description\":\"General-purpose utility work glove with synthetic leather palm, TPR knuckle, ANSI A2 cut, Level 3 abrasion, EN388 2132. Hybrid quick-release cuff. Sizes M-XXL.\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Ironclad\"},\"sku\":\"GUG-04-L\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"24.99\",\"availability\":\"https:\/\/schema.org\/InStock\"}}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What cut and abrasion protection does this glove provide?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The General Utility glove carries an ANSI 105 A2 cut rating with Level 3 abrasion resistance and an EN388:2003 2132 mechanical score, suitable for general handling and moderate-hazard tasks.\"}},{\"@type\":\"Question\",\"name\":\"Does the TPR knuckle guard limit dexterity?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. The patented palm design and spandex back retain high dexterity for tool and fastener work, while the TPR knuckle adds impact protection without stiffening the glove.\"}},{\"@type\":\"Question\",\"name\":\"What is the hybrid cuff system?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It combines a secure adjustable fit with a built-in quick-release safety feature and a TPR cuff puller, letting workers position and remove the glove quickly across repeated cycles.\"}}]}\n\u003c\/script\u003e","brand":"Ironclad","offers":[{"title":"Medium","offer_id":48621015302376,"sku":"GUG-03-M","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":48621015335144,"sku":"GUG-04-L","price":24.99,"currency_code":"USD","in_stock":true},{"title":"X-Large","offer_id":48621015367912,"sku":"GUG-05-XL","price":24.99,"currency_code":"USD","in_stock":true},{"title":"2X-Large","offer_id":48621015400680,"sku":"GUG-06-XXL","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/general_utility_GUG.webp?v=1780617242"},{"product_id":"ironclad-box-handler-gloves-bhg","title":"Ironclad Box Handler® Grip Gloves | Diamondclad® Silicone Palm EN388 3131X BHG","description":"\u003ch2\u003eIronclad Box Handler® Gloves Features\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eIronclad Box Handler® glove\u003c\/strong\u003e is a favorite among package-handling professionals, built around a patented Diamondclad® silicone-fused palm that delivers up to 200% more grip than standard synthetic palms. Duraclad® reinforcements add up to 8X the durability of normal synthetic leather. A neoprene knuckle guard contributes impact protection and breathability.\u003c\/p\u003e\n\u003cp\u003eMost handling gloves promise grip without quantifying it or disclosing mechanical data. This model resolves that gap with an EN388 3131X rating plus ANSI 105 A1 cut, Level 4 abrasion, and Level 2 puncture scores. Its silicone-fused palm grips cardboard, glass, metal, and tools where smooth synthetic palms slip.\u003c\/p\u003e\n\u003cp\u003eComfort and upkeep favor high-volume crews. Two-way high-stretch fabric and a terry-cloth thumb sweat wipe support all-day wear, while the hybrid quick-release cuff and TPR puller speed donning. These gloves are 100% machine washable, lowering replacement cost across repetitive logistics shifts.\u003c\/p\u003e\n\u003ch2\u003eAvailable Sizes and Configurations\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBHG-02-S\u003c\/td\u003e\n\u003ctd\u003eSmall\u003c\/td\u003e\n\u003ctd\u003e1 Pair, 9\" Length, Hybrid Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBHG-03-M\u003c\/td\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003e1 Pair, 9\" Length, Hybrid Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBHG-04-L\u003c\/td\u003e\n\u003ctd\u003eLarge\u003c\/td\u003e\n\u003ctd\u003e1 Pair, 9\" Length, Hybrid Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBHG-05-XL\u003c\/td\u003e\n\u003ctd\u003eX-Large\u003c\/td\u003e\n\u003ctd\u003e1 Pair, 9\" Length, Hybrid Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBHG-06-XXL\u003c\/td\u003e\n\u003ctd\u003e2X-Large\u003c\/td\u003e\n\u003ctd\u003e1 Pair, 9\" Length, Hybrid Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eIndustrial Grip \/ Box Handling Glove\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalm\u003c\/th\u003e\n\u003ctd\u003ePatented Diamondclad® Silicone-Fused Palm (up to 200% grip)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReinforcement\u003c\/th\u003e\n\u003ctd\u003eDuraclad® Thumb Saddle \u0026amp; Wear Zones (up to 8X durability)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact Protection\u003c\/th\u003e\n\u003ctd\u003eNeoprene \/ Airprene Knuckle Guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut Resistance\u003c\/th\u003e\n\u003ctd\u003eANSI 105 A1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasion \/ Puncture\u003c\/th\u003e\n\u003ctd\u003eANSI 105 Level 4 \/ Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical (EN388)\u003c\/th\u003e\n\u003ctd\u003e3131X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength \/ Care\u003c\/th\u003e\n\u003ctd\u003e9\" \/ 100% Machine Washable, Hang Dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePatent\u003c\/th\u003e\n\u003ctd\u003eU.S. Patent #D568003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLaboratory and Industrial Applications\u003c\/h2\u003e\n\u003cp\u003eReceiving docks, sample-logistics teams, and warehouse operations rely on the Box Handler for high-repetition lifting of boxes, totes, and crates. The silicone-fused palm secures slick cardboard and shrink-wrapped loads, reducing drops that damage inventory and slow throughput.\u003c\/p\u003e\n\u003cp\u003eGlass, metal, and ceramic handling tasks benefit from the tacky grip and puncture resistance. Automotive repair bays and tool-intensive workstations also use these gloves, where controlling hand tools and power tools demands tactile feedback alongside reliable abrasion protection.\u003c\/p\u003e\n\u003ch2\u003eGlove Comparison: Why Choose Ironclad Box Handler?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eIronclad BHG via LabSupplies.com\u003c\/th\u003e\n\u003cth\u003eTypical Competitor\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrip Disclosure\u003c\/td\u003e\n\u003ctd\u003eDiamondclad silicone palm, 200% grip quantified\u003c\/td\u003e\n\u003ctd\u003e\"Good grip\" with no metric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eEN388 3131X, ANSI A1\/4\/2 listed\u003c\/td\u003e\n\u003ctd\u003eRating omitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume Pricing\u003c\/td\u003e\n\u003ctd\u003eTiered case\/12-pair B2B rates\u003c\/td\u003e\n\u003ctd\u003eSingle-pair retail pricing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstitutional and Volume Pricing\u003c\/h2\u003e\n\u003cp\u003eLabSupplies.com offers tiered procurement pricing on the full BHG size run for universities, distribution centers, and industrial crews. Order mixed sizes by the case to standardize handling PPE across shifts, with net-30 terms for qualified institutions. Contact our B2B desk for crew-quantity and 12-pair pricing.\u003c\/p\u003e\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.globalindustrial.com\/site\/images\/ironclad\/glove_sizing_chart.pdf\"\u003eIronclad Glove Sizing Chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eBox Handler technical specifications available upon request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow much more grip does the Diamondclad palm provide?\u003c\/h3\u003e\n\u003cp\u003eThe patented Diamondclad® silicone-fused palm delivers up to 200% more grip than standard synthetic palms, securing slick surfaces like cardboard, glass, and metal during repetitive handling.\u003c\/p\u003e\n\u003ch3\u003eWhat mechanical protection ratings apply?\u003c\/h3\u003e\n\u003cp\u003eBox Handler gloves carry an EN388 3131X rating with ANSI 105 A1 cut, Level 4 abrasion, and Level 2 puncture resistance, suited to general handling rather than high cut-hazard tasks.\u003c\/p\u003e\n\u003ch3\u003eAre these gloves washable?\u003c\/h3\u003e\n\u003cp\u003eYes. They are 100% machine washable and should be hang dried, allowing repeated cleaning cycles to maintain grip and hygiene in shared-issue environments.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"Ironclad Box Handler Gloves\",\"image\":\"https:\/\/images.globalindustrial.com\/images\/enlarge\/IRNBHG03M_01.webp\",\"description\":\"Industrial grip gloves with patented Diamondclad silicone-fused palm (200% grip), Duraclad reinforcement, neoprene knuckle, EN388 3131X, ANSI A1 cut. Sizes S-XXL.\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Ironclad\"},\"sku\":\"BHG-04-L\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"24.99\",\"availability\":\"https:\/\/schema.org\/InStock\"}}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How much more grip does the Diamondclad palm provide?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The patented Diamondclad silicone-fused palm delivers up to 200% more grip than standard synthetic palms, securing slick surfaces like cardboard, glass, and metal during repetitive handling.\"}},{\"@type\":\"Question\",\"name\":\"What mechanical protection ratings apply?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Box Handler gloves carry an EN388 3131X rating with ANSI 105 A1 cut, Level 4 abrasion, and Level 2 puncture resistance, suited to general handling rather than high cut-hazard tasks.\"}},{\"@type\":\"Question\",\"name\":\"Are these gloves washable?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. They are 100% machine washable and should be hang dried, allowing repeated cleaning cycles to maintain grip and hygiene in shared-issue environments.\"}}]}\n\u003c\/script\u003e","brand":"Ironclad","offers":[{"title":"Small","offer_id":48621015433448,"sku":"BHG-02-S","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Medium","offer_id":48621015466216,"sku":"BHG-03-M","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":48621015498984,"sku":"BHG-04-L","price":24.99,"currency_code":"USD","in_stock":true},{"title":"X-Large","offer_id":48621015531752,"sku":"BHG-05-XL","price":24.99,"currency_code":"USD","in_stock":true},{"title":"2X-Large","offer_id":48621015564520,"sku":"BHG-06-XXL","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/IRNBHG03M_01.webp?v=1780617244"},{"product_id":"ironclad-exo-modern-water-resistant-gloves-exo2-mwr","title":"Ironclad EXO® Modern Water-Resistant Work Gloves | DuPont™ Teflon™ Palm EN388 3121 EXO2-MWR","description":"\u003ch2\u003eIronclad EXO® Modern Water-Resistant Gloves Features\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eIronclad EXO® Modern Water-Resistant glove\u003c\/strong\u003e is a durable medium-duty glove built around a DuPont™ Teflon™-treated, water-resistant synthetic suede palm. An EXO-embossed palm surface adds grip, while a breathable polyester knit back keeps the hand cool. Neoprene knuckle protection guards against minor impacts during routine maintenance tasks.\u003c\/p\u003e\n\u003cp\u003eMost water-resistant gloves omit the coating chemistry and mechanical ratings buyers need for hazard assessment. This model resolves that gap with a stated DuPont™ Teflon™ palm treatment, an EN388:2003 3121 rating, and ANSI 105 Level 2 puncture resistance. Crews stay protected against moisture without losing tactile control.\u003c\/p\u003e\n\u003cp\u003eDonning and comfort suit basic-issue PPE programs. A TPR hook-and-loop wrist closure secures fit, a suede cuff puller speeds positioning, and a terry-cloth thumb sweat wipe manages perspiration. Maintenance teams, forklift drivers, and production crews adopt this as a standard kit glove.\u003c\/p\u003e\n\u003ch2\u003eAvailable Sizes and Configurations\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEXO2-MWR-02-S\u003c\/td\u003e\n\u003ctd\u003eSmall\u003c\/td\u003e\n\u003ctd\u003e1 Pair (5-pair minimum order)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEXO2-MWR-03-M\u003c\/td\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003e1 Pair (5-pair minimum order)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEXO2-MWR-04-L\u003c\/td\u003e\n\u003ctd\u003eLarge\u003c\/td\u003e\n\u003ctd\u003e1 Pair (5-pair minimum order)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEXO2-MWR-05-XL\u003c\/td\u003e\n\u003ctd\u003eX-Large\u003c\/td\u003e\n\u003ctd\u003e1 Pair (5-pair minimum order)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEXO2-MWR-06-XXL\u003c\/td\u003e\n\u003ctd\u003e2X-Large\u003c\/td\u003e\n\u003ctd\u003e1 Pair (5-pair minimum order)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eMedium-Duty Water-Resistant Work Glove\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalm\u003c\/th\u003e\n\u003ctd\u003eWater-Resistant Synthetic Suede, DuPont™ Teflon™ Treated, EXO Embossed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack of Hand\u003c\/th\u003e\n\u003ctd\u003eBreathable Polyester Knit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact Protection\u003c\/th\u003e\n\u003ctd\u003eNeoprene Knuckle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical (EN388:2003)\u003c\/th\u003e\n\u003ctd\u003e3121\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePuncture (ANSI 105)\u003c\/th\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClosure\u003c\/th\u003e\n\u003ctd\u003eTPR Hook-and-Loop Wrist\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAdded Features\u003c\/th\u003e\n\u003ctd\u003eSuede Cuff Puller; Terry-Cloth Thumb Sweat Wipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Order\u003c\/th\u003e\n\u003ctd\u003e5 Pairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLaboratory and Industrial Applications\u003c\/h2\u003e\n\u003cp\u003eMaintenance departments, fleet bays, and production lines issue the EXO Modern Water-Resistant as a baseline PPE glove. The Teflon™-treated palm sheds moisture during equipment servicing, damp material handling, and outdoor tasks where bare synthetic palms soak through and lose grip.\u003c\/p\u003e\n\u003cp\u003eForklift operators, landscaping crews, and transportation teams favor the breathable knit back for all-day comfort. Construction cleanup, yard work, and general shop duties round out the use profile, making this a versatile single SKU for mixed-environment crews.\u003c\/p\u003e\n\u003ch2\u003eGlove Comparison: Why Choose Ironclad EXO?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eIronclad EXO via LabSupplies.com\u003c\/th\u003e\n\u003cth\u003eTypical Competitor\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating Disclosure\u003c\/td\u003e\n\u003ctd\u003eDuPont™ Teflon™ palm treatment named\u003c\/td\u003e\n\u003ctd\u003e\"Water resistant\" with no chemistry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eEN388 3121, ANSI puncture Level 2 listed\u003c\/td\u003e\n\u003ctd\u003eRating omitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume Pricing\u003c\/td\u003e\n\u003ctd\u003e5-pair minimum, tiered B2B rates\u003c\/td\u003e\n\u003ctd\u003eSingle-pair retail pricing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstitutional and Volume Pricing\u003c\/h2\u003e\n\u003cp\u003eLabSupplies.com offers tiered procurement pricing on the full EXO2-MWR size run for universities, facilities departments, and industrial crews. A 5-pair minimum supports basic-issue kit programs, with deeper discounts by the case and net-30 terms for qualified institutions. Contact our B2B desk for crew-quantity pricing.\u003c\/p\u003e\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/static.globalindustrial.com\/products\/pdf\/83358-brighton-best-international\/B2300443.pdf\"\u003eEXO2-MWR Modern Water-Resistant Spec Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eIronclad EXO size chart available upon request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat makes the palm water resistant?\u003c\/h3\u003e\n\u003cp\u003eThe synthetic suede palm carries a DuPont™ Teflon™ treatment that sheds moisture, helping maintain grip and comfort in damp conditions. It is water resistant rather than fully waterproof.\u003c\/p\u003e\n\u003ch3\u003eWhat mechanical protection do these gloves offer?\u003c\/h3\u003e\n\u003cp\u003eThe EXO Modern Water-Resistant carries an EN388:2003 3121 rating with ANSI 105 Level 2 puncture resistance, suited to medium-duty maintenance and handling rather than high cut-hazard work.\u003c\/p\u003e\n\u003ch3\u003eIs there a minimum order quantity?\u003c\/h3\u003e\n\u003cp\u003eYes. This glove ships with a 5-pair minimum order, aligning with basic-issue PPE kit programs where crews each receive a standard pair as part of their core equipment.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"Ironclad EXO Modern Water-Resistant Work Gloves\",\"image\":\"https:\/\/images.globalindustrial.com\/images\/enlarge\/BB1_EXO2-MWR-06-XXL.webp\",\"description\":\"Medium-duty water-resistant work gloves with DuPont Teflon-treated synthetic suede palm, neoprene knuckle, EN388 3121, ANSI puncture 2. 5-pair minimum. Sizes S-XXL.\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Ironclad EXO\"},\"sku\":\"EXO2-MWR-04-L\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"19.99\",\"eligibleQuantity\":{\"@type\":\"QuantitativeValue\",\"minValue\":5},\"availability\":\"https:\/\/schema.org\/InStock\"}}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What makes the palm water resistant?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The synthetic suede palm carries a DuPont Teflon treatment that sheds moisture, helping maintain grip and comfort in damp conditions. It is water resistant rather than fully waterproof.\"}},{\"@type\":\"Question\",\"name\":\"What mechanical protection do these gloves offer?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The EXO Modern Water-Resistant carries an EN388:2003 3121 rating with ANSI 105 Level 2 puncture resistance, suited to medium-duty maintenance and handling rather than high cut-hazard work.\"}},{\"@type\":\"Question\",\"name\":\"Is there a minimum order quantity?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. This glove ships with a 5-pair minimum order, aligning with basic-issue PPE kit programs where crews each receive a standard pair as part of their core equipment.\"}}]}\n\u003c\/script\u003e","brand":"Ironclad EXO","offers":[{"title":"Small \/ 5","offer_id":48621015597288,"sku":"EXO2-MWR-02-S","price":99.99,"currency_code":"USD","in_stock":true},{"title":"Medium \/ 5","offer_id":48621015630056,"sku":"EXO2-MWR-03-M","price":99.99,"currency_code":"USD","in_stock":true},{"title":"Large \/ 5","offer_id":48621015662824,"sku":"EXO2-MWR-04-L","price":99.99,"currency_code":"USD","in_stock":true},{"title":"X-Large \/ 5","offer_id":48621015695592,"sku":"EXO2-MWR-05-XL","price":99.99,"currency_code":"USD","in_stock":true},{"title":"2X-Large \/ 5","offer_id":48621015728360,"sku":"EXO2-MWR-06-XXL","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/BB1_EXO2-MWR-06-XXL.webp?v=1780617246"},{"product_id":"ironclad-exo-hi-vis-impact-gloves-exo2-hzi","title":"Ironclad EXO® Hi-Vis Impact Work Gloves 12-Pair Pack | TPR 360° EN388 2131 EXO2-HZI","description":"\u003ch2\u003eIronclad EXO® Hi-Vis Impact Gloves Features\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eIronclad EXO® Hi-Vis Impact glove\u003c\/strong\u003e is the workhorse of the EXO Industrial Athlete series, delivering 360° impact protection with full back-of-hand TPR knuckle and finger guards. A reflective expansion chamber and reflective fingertips boost visibility in low-light and high-traffic worksites. Open-cell memory foam palm pads absorb shock and vibration during tool use.\u003c\/p\u003e\n\u003cp\u003eMost impact gloves stop at a knuckle guard and skip both ratings and visibility detail. This model resolves that gap with an EN388 2131 rating, ANSI 105 abrasion Level 3, and puncture Level 2. Duraclad® reinforced fingertips add up to 8X the durability on the highest-wear contact points.\u003c\/p\u003e\n\u003cp\u003eComfort supports extended-wear crews. A reinforced synthetic suede palm preserves grip and tactile feel, while a breathable polyester knit back and terry-cloth sweat wipe manage heat and moisture. Sold as a 12-pair pack, this glove suits crew-scale impact-PPE rollouts.\u003c\/p\u003e\n\u003ch2\u003eAvailable Sizes and Configurations\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEXO2-HZI-02-S\u003c\/td\u003e\n\u003ctd\u003eSmall\u003c\/td\u003e\n\u003ctd\u003ePack of 12 Pairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEXO2-HZI-03-M\u003c\/td\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003ePack of 12 Pairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEXO2-HZI-04-L\u003c\/td\u003e\n\u003ctd\u003eLarge\u003c\/td\u003e\n\u003ctd\u003ePack of 12 Pairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEXO2-HZI-05-XL\u003c\/td\u003e\n\u003ctd\u003eX-Large\u003c\/td\u003e\n\u003ctd\u003ePack of 12 Pairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEXO2-HZI-06-XXL\u003c\/td\u003e\n\u003ctd\u003e2X-Large\u003c\/td\u003e\n\u003ctd\u003ePack of 12 Pairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHi-Visibility Impact-Resistant Work Glove\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalm\u003c\/th\u003e\n\u003ctd\u003eReinforced Synthetic Suede with Open-Cell Memory Foam Pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack of Hand\u003c\/th\u003e\n\u003ctd\u003eBreathable Polyester Knit; Reflective Expansion Chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact Protection\u003c\/th\u003e\n\u003ctd\u003e360° Back-of-Hand TPR Knuckle \u0026amp; Finger Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFingertips\u003c\/th\u003e\n\u003ctd\u003eDuraclad® Reinforced (up to 8X durability); Reflective\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical (EN388)\u003c\/th\u003e\n\u003ctd\u003e2131\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbrasion \/ Puncture (ANSI 105)\u003c\/th\u003e\n\u003ctd\u003eLevel 3 \/ Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAdded Features\u003c\/th\u003e\n\u003ctd\u003eTerry-Cloth Sweat Wipe; Slip-On Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack Size\u003c\/th\u003e\n\u003ctd\u003e12 Pairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLaboratory and Industrial Applications\u003c\/h2\u003e\n\u003cp\u003eRigging crews, dock workers, and crane-load handlers use the Hi-Vis Impact for tasks combining struck-by hazards with low visibility. Reflective fingertips and the dorsal expansion chamber keep hands seen during line handling and load securing, where standard dark gloves disappear against equipment.\u003c\/p\u003e\n\u003cp\u003eMaintenance and demolition teams rely on the memory-foam palm to dampen vibration from hand and power tools. Heavy assembly, oil-and-gas service, and utility work round out the profile, where 360° impact coverage protects fingers and knuckles against pinch and impact injuries.\u003c\/p\u003e\n\u003ch2\u003eGlove Comparison: Why Choose Ironclad EXO?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eIronclad EXO via LabSupplies.com\u003c\/th\u003e\n\u003cth\u003eTypical Competitor\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact Coverage\u003c\/td\u003e\n\u003ctd\u003e360° back-of-hand TPR knuckle + finger guards\u003c\/td\u003e\n\u003ctd\u003eKnuckle pad only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVisibility\u003c\/td\u003e\n\u003ctd\u003eReflective expansion chamber + fingertips\u003c\/td\u003e\n\u003ctd\u003eNo reflective elements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume Pricing\u003c\/td\u003e\n\u003ctd\u003e12-pair pack, tiered B2B rates\u003c\/td\u003e\n\u003ctd\u003eSingle-pair retail pricing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstitutional and Volume Pricing\u003c\/h2\u003e\n\u003cp\u003eLabSupplies.com offers the EXO2-HZI as a 12-pair pack for universities, ports, and industrial crews standardizing impact PPE. Mix sizes across multiple packs to outfit full shifts, with deeper case discounts and net-30 terms for qualified institutions. Contact our B2B desk for multi-pack crew pricing.\u003c\/p\u003e\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/static.globalindustrial.com\/products\/pdf\/83358-brighton-best-international\/B2300529.pdf\"\u003eIronclad EXO Glove Sizing Chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eEXO2-HZI \/ EXO2-HZIO sell sheet available upon request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow much impact protection do these gloves provide?\u003c\/h3\u003e\n\u003cp\u003eThe EXO Hi-Vis Impact provides 360° coverage with full back-of-hand TPR knuckle and finger guards, plus open-cell memory foam palm pads that absorb shock and vibration during hand and power tool use.\u003c\/p\u003e\n\u003ch3\u003eAre the gloves rated for cut hazards?\u003c\/h3\u003e\n\u003cp\u003eThese gloves carry an EN388 2131 rating focused on abrasion and tear, with ANSI abrasion Level 3 and puncture Level 2. They are not high cut-resistance gloves; pair them with cut-rated options where blades are present.\u003c\/p\u003e\n\u003ch3\u003eHow are the gloves sold?\u003c\/h3\u003e\n\u003cp\u003eThis listing ships as a 12-pair pack in a single size, supporting crew-scale impact-PPE rollouts. Order multiple packs across sizes to outfit a mixed-size workforce.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"Ironclad EXO Hi-Vis Impact Work Gloves (12-Pair Pack)\",\"image\":\"https:\/\/images.globalindustrial.com\/images\/enlarge\/BB1_EXO2-HZI-05-XL.webp\",\"description\":\"Hi-visibility impact-resistant work gloves, 12-pair pack. 360 TPR knuckle and finger protection, reflective fingertips, memory foam palm, EN388 2131, ANSI abrasion 3. Sizes S-XXL.\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Ironclad EXO\"},\"sku\":\"EXO2-HZI-05-XL\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"299.99\",\"availability\":\"https:\/\/schema.org\/InStock\"}}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How much impact protection do these gloves provide?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The EXO Hi-Vis Impact provides 360 coverage with full back-of-hand TPR knuckle and finger guards, plus open-cell memory foam palm pads that absorb shock and vibration during hand and power tool use.\"}},{\"@type\":\"Question\",\"name\":\"Are the gloves rated for cut hazards?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"These gloves carry an EN388 2131 rating focused on abrasion and tear, with ANSI abrasion Level 3 and puncture Level 2. They are not high cut-resistance gloves; pair them with cut-rated options where blades are present.\"}},{\"@type\":\"Question\",\"name\":\"How are the gloves sold?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"This listing ships as a 12-pair pack in a single size, supporting crew-scale impact-PPE rollouts. Order multiple packs across sizes to outfit a mixed-size workforce.\"}}]}\n\u003c\/script\u003e","brand":"Ironclad EXO","offers":[{"title":"Small \/ 12","offer_id":48621016416488,"sku":"EXO2-HZI-02-S","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Medium \/ 12","offer_id":48621016449256,"sku":"EXO2-HZI-03-M","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Large \/ 12","offer_id":48621016482024,"sku":"EXO2-HZI-04-L","price":299.99,"currency_code":"USD","in_stock":true},{"title":"X-Large \/ 12","offer_id":48621016514792,"sku":"EXO2-HZI-05-XL","price":299.99,"currency_code":"USD","in_stock":true},{"title":"2X-Large \/ 12","offer_id":48621016547560,"sku":"EXO2-HZI-06-XXL","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/BB1_EXO2-HZI-05-XL.webp?v=1780617248"},{"product_id":"ironclad-heatworx-heavy-duty-heat-resistant-gloves-hw6x","title":"Ironclad HeatWorx® Heavy Duty Heat-Resistant Gloves | 600°F Kevlar® Silicone Palm ANSI A2 HW6X","description":"\u003ch2\u003eIronclad HeatWorx® Heavy Duty Gloves Features\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eIronclad HeatWorx® Heavy Duty glove\u003c\/strong\u003e is the brand's most advanced heat-resistant glove, engineered to grasp objects up to 600°F. A seamless 3D molded silicone palm delivers high-temperature grip, while a 100% DuPont™ Kevlar® shell adds heat and cut protection. Silicone-laminated Kevlar® finger sidewalls shield critical contact zones during hot-parts handling.\u003c\/p\u003e\n\u003cp\u003eMost high-heat gloves cite a temperature but hide the construction and standards safety officers need. This model resolves that gap with a documented EN388 4143B rating, ANSI A2 cut, ANSI Heat Level 5, and Puncture Level 3. A Kovenex® palm liner and Nomex® FR stitching complete an audit-ready thermal package.\u003c\/p\u003e\n\u003cp\u003eDurability suits demanding hot-work environments. An extended gauntlet cuff protects the wrist and lower forearm, while the oil-resistant, washable construction extends service life. Knuckle impact protection guards the back of the hand during foundry, fabrication, and hi-temp automotive tasks.\u003c\/p\u003e\n\u003ch2\u003eAvailable Sizes and Configurations\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHW6X-02-S\u003c\/td\u003e\n\u003ctd\u003eSmall\u003c\/td\u003e\n\u003ctd\u003e1 Pair, Gauntlet Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHW6X-03-M\u003c\/td\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003e1 Pair, Gauntlet Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHW6X-04-L\u003c\/td\u003e\n\u003ctd\u003eLarge\u003c\/td\u003e\n\u003ctd\u003e1 Pair, Gauntlet Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHW6X-05-XL\u003c\/td\u003e\n\u003ctd\u003eX-Large\u003c\/td\u003e\n\u003ctd\u003e1 Pair, Gauntlet Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHW6X-06-XXL\u003c\/td\u003e\n\u003ctd\u003e2X-Large\u003c\/td\u003e\n\u003ctd\u003e1 Pair, Gauntlet Cuff\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHeavy-Duty Heat \u0026amp; Cut Resistant Work Glove\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalm\u003c\/th\u003e\n\u003ctd\u003eSeamless 3D Molded Silicone (grasping up to 600°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShell\u003c\/th\u003e\n\u003ctd\u003e100% DuPont™ Kevlar®\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalm Liner\u003c\/th\u003e\n\u003ctd\u003eKovenex® DuPont™ Kevlar®\/Nomex®\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinger Sidewalls\u003c\/th\u003e\n\u003ctd\u003eSilicone-Laminated Kevlar®\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat Rating\u003c\/th\u003e\n\u003ctd\u003eUp to 600°F (315°C) Contact; ANSI Heat Level 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut \/ Puncture\u003c\/th\u003e\n\u003ctd\u003eANSI A2 \/ ANSI Level 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical (EN388)\u003c\/th\u003e\n\u003ctd\u003e4143B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuff \/ Care\u003c\/th\u003e\n\u003ctd\u003eExtended Gauntlet; Oil-Resistant, Washable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLaboratory and Industrial Applications\u003c\/h2\u003e\n\u003cp\u003eFoundries, metalworking shops, and glass-handling operations use the HW6X to grasp hot stock, castings, and tooling where lower-rated gloves fail. The molded silicone palm secures slick hot objects, while the Kevlar® shell adds the cut resistance needed around sheet metal and sharp edges.\u003c\/p\u003e\n\u003cp\u003eHi-temp automotive, demolition, and manufacturing-assembly teams rely on the gauntlet cuff and finger sidewall protection during sustained heat exposure. Welding support tasks and military field maintenance round out the profile, where extreme thermal protection and controlled dexterity must coexist.\u003c\/p\u003e\n\u003ch2\u003eGlove Comparison: Why Choose Ironclad HeatWorx?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eIronclad HeatWorx via LabSupplies.com\u003c\/th\u003e\n\u003cth\u003eTypical Competitor\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Disclosure\u003c\/td\u003e\n\u003ctd\u003eMolded silicone palm + 100% Kevlar shell named\u003c\/td\u003e\n\u003ctd\u003e\"Heat resistant\" with no build detail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eEN388 4143B, ANSI A2 \/ Heat 5 \/ Puncture 3\u003c\/td\u003e\n\u003ctd\u003eTemperature only, no ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume Pricing\u003c\/td\u003e\n\u003ctd\u003eTiered case\/6-pair B2B rates\u003c\/td\u003e\n\u003ctd\u003eSingle-pair retail pricing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstitutional and Volume Pricing\u003c\/h2\u003e\n\u003cp\u003eLabSupplies.com offers tiered procurement pricing on the full HW6X size run for foundries, universities, and industrial crews. Order mixed sizes by the case to standardize high-heat PPE across shifts, with net-30 terms for qualified institutions. Contact our B2B desk for crew-quantity and 6-pair case pricing.\u003c\/p\u003e\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.globalindustrial.com\/site\/images\/ironclad\/HW6X_SS.pdf\"\u003eHW6X HeatWorx Heavy Duty Spec Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.globalindustrial.com\/site\/images\/ironclad\/glove_sizing_chart.pdf\"\u003eIronclad Glove Sizing Chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the maximum temperature these gloves handle?\u003c\/h3\u003e\n\u003cp\u003eThe molded silicone palm allows grasping objects up to 600°F (315°C). This is the brand's most advanced heat glove, carrying an ANSI Heat Level 5 rating for extreme thermal contact tasks.\u003c\/p\u003e\n\u003ch3\u003eDo these gloves also resist cuts?\u003c\/h3\u003e\n\u003cp\u003eYes. The 100% DuPont™ Kevlar® shell provides an ANSI A2 cut rating alongside its heat protection, making the HW6X suitable for hot work that also involves sheet metal and sharp edges.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the HW6X and the FR version?\u003c\/h3\u003e\n\u003cp\u003eThe standard HW6X is rated for 600°F contact heat and cut protection. The separate HW6XFR variant adds NFPA 2112 flash-fire certification; specify the FR model if flame certification is required for your application.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"Ironclad HeatWorx Heavy Duty Heat-Resistant Gloves\",\"image\":\"https:\/\/images.globalindustrial.com\/images\/enlarge\/heatworx_heavy_duty_HW6X.webp\",\"description\":\"600F heavy-duty heat-resistant gloves with molded silicone palm, 100% DuPont Kevlar shell, Kovenex liner, EN388 4143B, ANSI A2 cut, Heat Level 5. Sizes S-XXL.\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Ironclad\"},\"sku\":\"HW6X-04-L\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"69.99\",\"availability\":\"https:\/\/schema.org\/InStock\"}}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is the maximum temperature these gloves handle?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The molded silicone palm allows grasping objects up to 600F (315C). This is the brand's most advanced heat glove, carrying an ANSI Heat Level 5 rating for extreme thermal contact tasks.\"}},{\"@type\":\"Question\",\"name\":\"Do these gloves also resist cuts?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The 100% DuPont Kevlar shell provides an ANSI A2 cut rating alongside its heat protection, making the HW6X suitable for hot work that also involves sheet metal and sharp edges.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between the HW6X and the FR version?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The standard HW6X is rated for 600F contact heat and cut protection. The separate HW6XFR variant adds NFPA 2112 flash-fire certification; specify the FR model if flame certification is required for your application.\"}}]}\n\u003c\/script\u003e","brand":"Ironclad","offers":[{"title":"Small","offer_id":48621225148648,"sku":"HW6X-02-S","price":69.99,"currency_code":"USD","in_stock":true},{"title":"Medium","offer_id":48621225181416,"sku":"HW6X-03-M","price":69.99,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":48621225214184,"sku":"HW6X-04-L","price":69.99,"currency_code":"USD","in_stock":true},{"title":"X-Large","offer_id":48621225246952,"sku":"HW6X-05-XL","price":69.99,"currency_code":"USD","in_stock":true},{"title":"2X-Large","offer_id":48621225279720,"sku":"HW6X-06-XXL","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/heatworx_heavy_duty_HW6X.webp?v=1780622247"},{"product_id":"ironclad-stick-welder-gloves-wstk","title":"Ironclad Stick Welder Gloves | Elkskin Leather 10\" Cuff SMAW Welding WSTK (Pack of 2)","description":"\u003ch2\u003eIronclad Stick Welder Gloves Features\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eIronclad Stick Welder glove\u003c\/strong\u003e features a premium, shrink-resistant elkskin palm and back-of-hand for maximum protection against heat, sparks, and spatter during stick welding. A 10\" full leather cuff extends coverage up the forearm. Welted seams stitched throughout with tough aramid thread resist heat-driven seam failure where standard cotton thread burns through.\u003c\/p\u003e\n\u003cp\u003eMost welding gloves omit the leather type and stitching detail that determine service life under SMAW heat. This model resolves that gap by specifying shrink-resistant elkskin and aramid-thread welted seams. Elkskin resists hardening and shrinkage from repeated high-heat exposure better than economy split cowhide.\u003c\/p\u003e\n\u003cp\u003eProcurement favors consumable-cycle buying. Sold as a pack of 2, these gloves suit welders who rotate pairs as spatter wear accumulates. Sizing runs Medium through X-Large, supporting individual fitting across a welding crew or training cohort.\u003c\/p\u003e\n\u003ch2\u003eAvailable Sizes and Configurations\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWSTK-03-M\u003c\/td\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003ePack of 2 Pairs\u003c\/td\u003e\n\u003ctd\u003e$54.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWSTK-04-L\u003c\/td\u003e\n\u003ctd\u003eLarge\u003c\/td\u003e\n\u003ctd\u003ePack of 2 Pairs\u003c\/td\u003e\n\u003ctd\u003e$59.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWSTK-05-XL\u003c\/td\u003e\n\u003ctd\u003eX-Large\u003c\/td\u003e\n\u003ctd\u003ePack of 2 Pairs\u003c\/td\u003e\n\u003ctd\u003e$79.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eStick (SMAW) Welding Glove\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalm \u0026amp; Back\u003c\/th\u003e\n\u003ctd\u003ePremium Shrink-Resistant Elkskin Leather\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuff\u003c\/th\u003e\n\u003ctd\u003e10\" Full Leather Gauntlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeams\u003c\/th\u003e\n\u003ctd\u003eWelted Seams Throughout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStitching\u003c\/th\u003e\n\u003ctd\u003eTough Aramid (Heat-Resistant) Thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary Use\u003c\/th\u003e\n\u003ctd\u003eStick Welding; Heat, Spark \u0026amp; Spatter Protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack Size\u003c\/th\u003e\n\u003ctd\u003e2 Pairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLaboratory and Industrial Applications\u003c\/h2\u003e\n\u003cp\u003eFabrication shops, structural welding crews, and pipe-welding operations use the Stick Welder for SMAW work that throws heavy spatter and sustained radiant heat. The elkskin palm and 10\" cuff protect the hand and forearm during overhead and out-of-position welds where sparks fall toward the arm.\u003c\/p\u003e\n\u003cp\u003eWelding schools and maintenance departments stock these for training and repair work. The pack-of-2 format supports consumable rotation, letting welders swap pairs as spatter pitting accumulates, while the aramid stitching keeps seams intact across repeated high-heat cycles.\u003c\/p\u003e\n\u003ch2\u003eGlove Comparison: Why Choose Ironclad?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eIronclad Stick Welder via LabSupplies.com\u003c\/th\u003e\n\u003cth\u003eTypical Competitor\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeather Disclosure\u003c\/td\u003e\n\u003ctd\u003eShrink-resistant elkskin specified\u003c\/td\u003e\n\u003ctd\u003e\"Leather\" with no type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e10\" cuff, welted seams, aramid thread\u003c\/td\u003e\n\u003ctd\u003eStandard cuff, cotton stitching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcurement Format\u003c\/td\u003e\n\u003ctd\u003ePack of 2, tiered B2B rates\u003c\/td\u003e\n\u003ctd\u003eSingle-pair retail pricing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstitutional and Volume Pricing\u003c\/h2\u003e\n\u003cp\u003eLabSupplies.com offers tiered procurement pricing on the WSTK size run for fabrication shops, welding schools, and industrial crews. The pack-of-2 format supports consumable rotation, with deeper case discounts and net-30 terms for qualified institutions. Contact our B2B desk for crew-quantity pricing across sizes.\u003c\/p\u003e\n\u003ch2\u003eProduct Documentation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/static.globalindustrial.com\/products\/pdf\/83358-brighton-best-international\/B2300534.pdf\"\u003eIronclad Welding Glove Sizing Chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eWSTK Stick Welder technical specifications available upon request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat welding processes are these gloves designed for?\u003c\/h3\u003e\n\u003cp\u003eThe Stick Welder is built for SMAW (stick) welding, offering heavy protection against the high heat, sparks, and spatter that process generates. Its thick elkskin trades fine dexterity for maximum heat shielding.\u003c\/p\u003e\n\u003ch3\u003eWhy does pricing differ by size?\u003c\/h3\u003e\n\u003cp\u003eEach size carries its own price (Medium $54.99, Large $59.99, X-Large $79.99) reflecting material quantity and availability. Select your size to see its exact pack-of-2 price at checkout.\u003c\/p\u003e\n\u003ch3\u003eWhat is the benefit of elkskin over cowhide?\u003c\/h3\u003e\n\u003cp\u003eElkskin resists hardening and shrinkage from repeated high-heat exposure better than economy split cowhide, helping the glove stay pliable and extending service life in sustained stick-welding work.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"Ironclad Stick Welder Gloves (Pack of 2)\",\"image\":\"https:\/\/images.globalindustrial.com\/images\/enlarge\/BB1_WSTK-03-M.webp\",\"description\":\"Stick (SMAW) welding gloves, pack of 2. Shrink-resistant elkskin palm and back, 10-inch full leather cuff, welted seams, aramid thread stitching. Sizes M-XL.\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Ironclad\"},\"offers\":{\"@type\":\"AggregateOffer\",\"priceCurrency\":\"USD\",\"lowPrice\":\"54.99\",\"highPrice\":\"79.99\",\"offerCount\":\"3\",\"availability\":\"https:\/\/schema.org\/InStock\"}}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What welding processes are these gloves designed for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The Stick Welder is built for SMAW (stick) welding, offering heavy protection against the high heat, sparks, and spatter that process generates. Its thick elkskin trades fine dexterity for maximum heat shielding.\"}},{\"@type\":\"Question\",\"name\":\"Why does pricing differ by size?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Each size carries its own price (Medium $54.99, Large $59.99, X-Large $79.99) reflecting material quantity and availability. Select your size to see its exact pack-of-2 price at checkout.\"}},{\"@type\":\"Question\",\"name\":\"What is the benefit of elkskin over cowhide?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Elkskin resists hardening and shrinkage from repeated high-heat exposure better than economy split cowhide, helping the glove stay pliable and extending service life in sustained stick-welding work.\"}}]}\n\u003c\/script\u003e","brand":"Ironclad","offers":[{"title":"Medium","offer_id":48621225345256,"sku":"WSTK-03-M","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":48621225378024,"sku":"WSTK-04-L","price":59.99,"currency_code":"USD","in_stock":true},{"title":"X-Large","offer_id":48621225410792,"sku":"WSTK-05-XL","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/files\/BB1_WSTK-03-M.webp?v=1780622249"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5361\/1240\/collections\/ironclad.png?v=1780617803","url":"https:\/\/labsupplies.com\/collections\/ironclad-gloves.oembed","provider":"LabSupplies.com","version":"1.0","type":"link"}